1969 Short Wide - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**screaminchevypickup** · 08-04-2011, 11:51 PM

Looks good I like the area 51 pic ; )
Posted via Mobile Device

mcbassin · 08-04-2011, 11:57 PM

Quote:

Originally Posted by screaminchevypickup

Looks good I like the area 51 pic ; )

Thanks man. more to come soon.

VA72C10 · 08-05-2011, 12:02 AM

Looking good!!!

71Sleeper · 08-05-2011, 02:24 AM

Looking good!!! Subscribed

JohnC · 08-05-2011, 12:55 PM

Looking good man!

68 TT · 08-06-2011, 10:47 AM

Quote:

Originally Posted by mcbassin

Oh and one more area51 development project:

Very nice piece.

Did you make it as one piece or two?

We used to make some complex puzzles for desk ornaments in our machine shop that were done by freezing one part and heating the other then pressing them together. Once the two parts normalized in temp they would never come apart again.

68 TT · 08-06-2011, 11:11 AM

Quote:

Originally Posted by mcbassin

Thanks Steve.
I'm unsure of where I'm going to put the filler. I might run it over to the left inside of the bed or may just cap off this filler and add another that goes straight up? I haven't done much research on this yet.

I have the filler neck & quarter panel support parts from a square body K5 Blazer I am going to use but instead of the square filler door from the K5 I am going to use an 88-98 truck round filler door assembly. I think the round fuel door won't look too out of place.

I considered an in bed or a behind the license plate fill point but If I am towing something or have a load in the bed it would make getting fuel a pain.

I like the marker lamp fill point idea but don't have marker lights.

Another one I like is the top of bed rail fill point with a boat or motor cycle pop up gas cap that sits flush with the top of the bed rail when closed.

Behind the tail light is a cool idea but looks like a bunch of work. With the access to a machine shop you have this could be a nice one for you to tackle. You could make some nice hinged mounts for the tail light to sit in and really clean things up.

mcbassin · 08-06-2011, 05:30 PM

Quote:

Originally Posted by 68 TT

Very nice piece.

Did you make it as one piece or two?

We used to make some complex puzzles for desk ornaments in our machine shop that were done by freezing one part and heating the other then pressing them together. Once the two parts normalized in temp they would never come apart again.

Thanks,
This is definetly one piece. There will be info coming up on this part.

I have made a few puzzles in my time too. We do interference fits all the time where part a is heated and part b is frozen to -60. Slip together nice then they are there permenantly.

Quote:

Originally Posted by 68 TT

I have the filler neck & quarter panel support parts from a square body K5 Blazer I am going to use but instead of the square filler door from the K5 I am going to use an 88-98 truck round filler door assembly. I think the round fuel door won't look too out of place.

I considered an in bed or a behind the license plate fill point but If I am towing something or have a load in the bed it would make getting fuel a pain.

I like the marker lamp fill point idea but don't have marker lights.

Another one I like is the top of bed rail fill point with a boat or motor cycle pop up gas cap that sits flush with the top of the bed rail when closed.

Behind the tail light is a cool idea but looks like a bunch of work. With the access to a machine shop you have this could be a nice one for you to tackle. You could make some nice hinged mounts for the tail light to sit in and really clean things up.

I may do an in the bed filler. I just haven't done any research on this subject yet. This is my first one with a rear tank. I do have access to equipment to build just about anything. I have a hard time making up my mind on some of the smallest things. I am pretty much always bound by my "budget". I'm sure I will come up with something.

68 TT · 08-06-2011, 11:11 PM

Quote:

Originally Posted by mcbassin

I may do an in the bed filler. I just haven't done any research on this subject yet. This is my first one with a rear tank. I do have access to equipment to build just about anything. I have a hard time making up my mind on some of the smallest things. I am pretty much always bound by my "budget". I'm sure I will come up with something.

A nice one I just saw had the filler in the bed but higher up on the corner post where you could get at it with some stuff in the bed.

mcbassin · 08-09-2011, 11:30 PM

A little clearer pictures:

Zoomin · 08-09-2011, 11:34 PM

Wow! Nice work Mike!
Posted via Mobile Device

VA72C10 · 08-09-2011, 11:40 PM

Top notch quality!!!

**screaminchevypickup** · 08-09-2011, 11:45 PM

Looks good!!!
Posted via Mobile Device

**Dieselwrencher** · 08-10-2011, 04:00 AM

Very nice! It's looking great!

mcbassin · 09-15-2011, 08:47 AM

Quote:

Originally Posted by Zoomin

Wow! Nice work Mike!
Posted via Mobile Device

Quote:

Originally Posted by VA72C10

Top notch quality!!!

Quote:

Originally Posted by screaminchevypickup

Looks good!!!
Posted via Mobile Device

Quote:

Originally Posted by Dieselwrencher

Very nice! It's looking great!

Thanks guys for the props!

mcbassin · 09-15-2011, 09:02 AM

I have been working on this project quite a lot lately. I haven't been taking many pictures....sorry. I have installed the motor and tranny to figure out the motor mounts and the rear cross member position. I got all the new holes drilled. It's now set up to install the LS motor. I really want to find a 6.0 before final install but will go forward with the 4.8 if I have to.

I purchased all the components for the fuel system and a set of original buckets from a 71-72. They are really nice considering their 40 years old. The price wasn't cheap but these were pretty close and I could look at them before buying. Really nice older lady that I bought them from. She was firm on her price at first then she dropped the price down $100 but she wouldn't budge off that. She had coaching from her son and grandson that were there when I bought them. Her husband was restoring a 72 GMC when he passed. She went on to finish it (real nice truck)$$$. He had also purchased some new door panels that matched not oem but very good quality from classic industries. I got them for $100 so I ended up getting the buckets and panels for what she wanted for the doors.

Crappy cell pics below. Better and More pics later.
Mocking up the engine

Seats and panels

68 TT · 09-15-2011, 10:05 AM

Glad you are making progress on the truck again.

Nice find on the seats & door panels. I have the same door panels for my truck, just that mine are fair condition used parts.

I have a set of first gen Camaro seats I was thinking of recovering to match the door panels or even change them to hounds tooth. They look very similar to the seats you bought.

Did the console come with the seats or did you have it already?

mcbassin · 09-15-2011, 11:05 AM

Quote:

Originally Posted by 68 TT

Glad you are making progress on the truck again.

Nice find on the seats & door panels. I have the same door panels for my truck, just that mine are fair condition used parts.

I have a set of first gen Camaro seats I was thinking of recovering to match the door panels or even change them to hounds tooth. They look very similar to the seats you bought.

Did the console come with the seats or did you have it already?

Thanks,
Yep the console came with the set. The fellow that owned them last bought them at the Chickasha swap meet back in 1992. They were in storage since then. I may go with hounds tooth some day too. They look good enough to use now with a little cleaning and polish. I wish the pattern was 69-70 but I looked for a long time just to find these local. I see them on the classified section here occasionally but shipping adds at least $100 or more.

VA72C10 · 09-15-2011, 11:14 AM

Those seats look amazing for originals! Nice find!!!

Zoomin · 09-15-2011, 01:44 PM

Yeah, those look like the foams are in good shape too. Those may have been pricey, but considering you didn't have to pay shipping, or buy new foams or covers you did good.

Where did you find the 4.8?
Posted via Mobile Device

**lolife99** · 09-15-2011, 01:53 PM

I'd love to have those buckets and console!
Looks like lots of progress.

mcbassin · 09-15-2011, 04:12 PM

Quote:

Originally Posted by VA72C10

Those seats look amazing for originals! Nice find!!!

Thanks,
There is a chance they have had one recover using the original scrolls

Quote:

Originally Posted by Zoomin

Yeah, those look like the foams are in good shape too. Those may have been pricey, but considering you didn't have to pay shipping, or buy new foams or covers you did good.

Where did you find the 4.8?
Posted via Mobile Device

Yep, I think I did alright on them the foam is excellent. There is a little wear on the driver side. Not bad. I paid $550 for the set.
I picked up the 4.8 back a fes years ago on Craigs from a local in shawnee.
It's an 03 suppose to be lower miler.

Quote:

Originally Posted by lolife99

I'd love to have those buckets and console!
Looks like lots of progress.

Thanks I'm happy to have them. I think it will change the overall interior plan quite a bit. If I decide to get rid of them I'll let you know. I have been looking for a few years ya know.

mcbassin · 09-15-2011, 04:27 PM

more on the area 51 project.
Kyle (screaminchevypickup) and I have been working on this one for a while. He was nice enough to let me borrow one of his center caps to reverse engineer a cap for Coy wheels (possibly others?) that would fit our trucks directly. Notice the thicker flange and the undercut take the place of the spacer. I'm not going to be running any production on this project....just too time consuming. When I get my own equipment I will for sure.
Here is what his turned out like:
Back side:

Prototype:

Finished product:

gringoloco · 09-15-2011, 05:07 PM

Would ya look at that?! Very nice pieces

VA72C10 · 09-15-2011, 06:14 PM

Awesome piece!!! If I get coys I'll look you up for a set of those!!!

And you got a GREAT deal on the seats! A set like that could easily sell for 1000-1200 with the console!

08-04-2011, 11:51 PM	#451
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Looks good I like the area 51 pic ; ) Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

08-05-2011, 12:02 AM	#453
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 Short Wide Looking good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-05-2011, 02:24 AM	#454
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 1969 Short Wide Looking good!!! Subscribed __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

08-05-2011, 12:55 PM	#455
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1969 Short Wide Looking good man!

08-09-2011, 11:30 PM	#460
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide A little clearer pictures: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-09-2011, 11:34 PM	#461
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1969 Short Wide Wow! Nice work Mike! Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

08-09-2011, 11:40 PM	#462
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 Short Wide Top notch quality!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-09-2011, 11:45 PM	#463
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Looks good!!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

08-10-2011, 04:00 AM	#464
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1969 Short Wide Very nice! It's looking great! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-15-2011, 09:02 AM	#466
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide I have been working on this project quite a lot lately. I haven't been taking many pictures....sorry. I have installed the motor and tranny to figure out the motor mounts and the rear cross member position. I got all the new holes drilled. It's now set up to install the LS motor. I really want to find a 6.0 before final install but will go forward with the 4.8 if I have to. I purchased all the components for the fuel system and a set of original buckets from a 71-72. They are really nice considering their 40 years old. The price wasn't cheap but these were pretty close and I could look at them before buying. Really nice older lady that I bought them from. She was firm on her price at first then she dropped the price down $100 but she wouldn't budge off that. She had coaching from her son and grandson that were there when I bought them. Her husband was restoring a 72 GMC when he passed. She went on to finish it (real nice truck)$$$. He had also purchased some new door panels that matched not oem but very good quality from classic industries. I got them for $100 so I ended up getting the buckets and panels for what she wanted for the doors. Crappy cell pics below. Better and More pics later. Mocking up the engine Seats and panels __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 10-10-2011 at 02:11 PM.

09-15-2011, 10:05 AM	#467
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 1969 Short Wide Glad you are making progress on the truck again. Nice find on the seats & door panels. I have the same door panels for my truck, just that mine are fair condition used parts. I have a set of first gen Camaro seats I was thinking of recovering to match the door panels or even change them to hounds tooth. They look very similar to the seats you bought. Did the console come with the seats or did you have it already? __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

09-15-2011, 11:14 AM	#469
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 Short Wide Those seats look amazing for originals! Nice find!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-15-2011, 01:44 PM	#470
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1969 Short Wide Yeah, those look like the foams are in good shape too. Those may have been pricey, but considering you didn't have to pay shipping, or buy new foams or covers you did good. Where did you find the 4.8? Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

09-15-2011, 01:53 PM	#471
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 1969 Short Wide I'd love to have those buckets and console! Looks like lots of progress. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-15-2011, 04:27 PM	#473
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide more on the area 51 project. Kyle (screaminchevypickup) and I have been working on this one for a while. He was nice enough to let me borrow one of his center caps to reverse engineer a cap for Coy wheels (possibly others?) that would fit our trucks directly. Notice the thicker flange and the undercut take the place of the spacer. I'm not going to be running any production on this project....just too time consuming. When I get my own equipment I will for sure. Here is what his turned out like: Back side: Prototype: Finished product: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 09-29-2011 at 12:40 AM.



Register or Log In To remove these advertisements.

09-15-2011, 05:07 PM	#474
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 1969 Short Wide Would ya look at that?! Very nice pieces __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-15-2011, 06:14 PM	#475
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 Short Wide Awesome piece!!! If I get coys I'll look you up for a set of those!!! And you got a GREAT deal on the seats! A set like that could easily sell for 1000-1200 with the console! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.