I'm one of you guys now - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JohnC · 10-05-2009, 10:56 AM

Don't know why it wouldn't work. Guess if it starts squeaking you can always pull it back down, and do something different. Just don't scratch that impressive paint job!

menace121978 · 10-05-2009, 10:57 AM

Looking great Joe.. your really knocking it out!

the anti squeek straps are only like 10 bucks from lmc. you could almost/ most likely do 2 tanks with 1 kit... just a thought. or maybe cut a thin piece of rubber hose and lay it out.

JohnC · 10-05-2009, 11:00 AM

Quote:

Originally Posted by menace121978

Looking great Joe.. your really knocking it out!

the anti squeek straps are only like 10 bucks from lmc. you could almost/ most likely do 2 tanks with 1 kit... just a thought. or maybe cut a thin piece of rubber hose and lay it out.

Hey that's an idea. Since now I have to get another tank, we can do both tanks!

joe231 · 10-05-2009, 11:20 AM

I realize it is cheap, but what about shipping, then I have to wait for it.......I hate mail order

BTW, Thanks Dennis!

JohnC · 10-05-2009, 11:21 AM

Are you going to do it tonight?

Jonboy · 10-05-2009, 11:22 AM

Use a bicycle innertube. Cheaper, and readily available.

joe231 · 10-05-2009, 11:48 AM

Quote:

Originally Posted by JohnC

Are you going to do it tonight?

maybe..............................

Quote:

Originally Posted by Jonboy

Use a bicycle innertube. Cheaper, and readily available.

excellent idea!!!

see John, you open up a dialogue on the subject and get lots of good input, and ideas

menace121978 · 10-05-2009, 11:53 AM

great idea! and thinner too..

JohnC · 10-05-2009, 02:23 PM

That and I have bicycle innertubes here at the store!

flamingbig10 · 10-05-2009, 02:43 PM

looking good

joe231 · 10-05-2009, 03:02 PM

Quote:

Originally Posted by JohnC

That and I have bicycle innertubes here at the store!

Hook a brutha up!!!

I was going to ask you also.... What paint did you use on that tank. I think I might paint the other tank and my frame with it

Quote:

Originally Posted by flamingbig10

looking good

thanks Aaron!!!

JohnC · 10-05-2009, 03:40 PM

I just used some of the Ace Satin Black paint I have here at the store. See how I do that. Make you have to come to my store to buy something.

joe231 · 10-05-2009, 04:50 PM

yeah, you are like a drug dealer......hand out some samples, get them hooked, than......WHAMMO!!! I got ya right where I want ya!

**scotts62** · 10-05-2009, 09:49 PM

thats usually how we i mean how its done

JohnC · 10-06-2009, 08:59 AM

Don't hate the player, hate the game.

menace121978 · 10-06-2009, 10:19 AM

i got what you need boy!

*highperf4x4* · 10-06-2009, 10:48 AM

You guys have been sniffin too many exhaust fumes............

TimE · 10-22-2009, 10:28 PM

Looks like you've made some good progress since I checked in last. Keep at it Joe!

joe231 · 10-22-2009, 10:52 PM

TIM!!!!!!!!!!!!!!!

I was just wondering about you and your 5.3 today......

**scotts62** · 10-23-2009, 08:02 AM

Yeah wtf where you been hidin?

Nice of you to pop in again

joe231 · 01-10-2010, 01:38 AM

small update!

My factory tach now works

it is off a bit so I need to calibrate it, but I'm super stoked to have it working!!

*BGRAFX* · 01-10-2010, 01:44 AM

It's about time! LOL

joe231 · 01-10-2010, 01:46 AM

I know, right?

now I'm on the hunt for non-working factory tachs to repair and hook up my friends or sell on eBay

**scotts62** · 01-10-2010, 11:20 AM

What was the problem with the one the other day that you had working then it quit?

joe231 · 01-10-2010, 12:26 PM

That was the speedo

10-05-2009, 10:56 AM	#451
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: I'm one of you guys now Don't know why it wouldn't work. Guess if it starts squeaking you can always pull it back down, and do something different. Just don't scratch that impressive paint job!

10-05-2009, 10:57 AM	#452
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: I'm one of you guys now Looking great Joe.. your really knocking it out! the anti squeek straps are only like 10 bucks from lmc. you could almost/ most likely do 2 tanks with 1 kit... just a thought. or maybe cut a thin piece of rubber hose and lay it out. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

10-05-2009, 11:20 AM	#454
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I'm one of you guys now I realize it is cheap, but what about shipping, then I have to wait for it.......I hate mail order BTW, Thanks Dennis! __________________ *CHEVY ONLY*

10-05-2009, 11:21 AM	#455
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: I'm one of you guys now Are you going to do it tonight?

10-05-2009, 11:22 AM	#456
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: I'm one of you guys now Use a bicycle innertube. Cheaper, and readily available.

10-05-2009, 11:53 AM	#458
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: I'm one of you guys now great idea! and thinner too.. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

10-05-2009, 02:23 PM	#459
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: I'm one of you guys now That and I have bicycle innertubes here at the store!

10-05-2009, 02:43 PM	#460
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: I'm one of you guys now looking good __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-05-2009, 03:40 PM	#462
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: I'm one of you guys now I just used some of the Ace Satin Black paint I have here at the store. See how I do that. Make you have to come to my store to buy something.

10-05-2009, 04:50 PM	#463
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I'm one of you guys now yeah, you are like a drug dealer......hand out some samples, get them hooked, than......WHAMMO!!! I got ya right where I want ya! __________________ *CHEVY ONLY*

10-05-2009, 09:49 PM	#464
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: I'm one of you guys now thats usually how we i mean how its done __________________ Scott 93 crew cab build Project 62

10-06-2009, 08:59 AM	#465
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: I'm one of you guys now Don't hate the player, hate the game.

10-06-2009, 10:19 AM	#466
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: I'm one of you guys now i got what you need boy! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

10-06-2009, 10:48 AM	#467
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: I'm one of you guys now You guys have been sniffin too many exhaust fumes............

10-22-2009, 10:28 PM	#468
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: I'm one of you guys now Looks like you've made some good progress since I checked in last. Keep at it Joe! __________________ Just hopin' I live long enough to finish something!!!



Register or Log In To remove these advertisements.

10-22-2009, 10:52 PM	#469
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I'm one of you guys now TIM!!!!!!!!!!!!!!! I was just wondering about you and your 5.3 today...... __________________ *CHEVY ONLY*

10-23-2009, 08:02 AM	#470
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: I'm one of you guys now Yeah wtf where you been hidin? Nice of you to pop in again __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 10-23-2009 at 08:04 AM.

01-10-2010, 01:38 AM	#471
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I'm one of you guys now small update! My factory tach now works it is off a bit so I need to calibrate it, but I'm super stoked to have it working!! __________________ *CHEVY ONLY*

01-10-2010, 01:44 AM	#472
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: I'm one of you guys now It's about time! LOL

01-10-2010, 01:46 AM	#473
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I'm one of you guys now I know, right? now I'm on the hunt for non-working factory tachs to repair and hook up my friends or sell on eBay __________________ *CHEVY ONLY*

01-10-2010, 11:20 AM	#474
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: I'm one of you guys now What was the problem with the one the other day that you had working then it quit? __________________ Scott 93 crew cab build Project 62

01-10-2010, 12:26 PM	#475
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: I'm one of you guys now That was the speedo __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.