LS1 into a 73 cheyenne - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

v502 · 10-25-2010, 05:40 AM

Sounds evil

68 TT · 10-25-2010, 11:33 AM

Quote:

Originally Posted by smokedat

i got rid of the original stopers and replaced them with these new low profile pancake style

Since you are going to re-shoot the area you should really do a little boxing of the frame rails everywhere you can. It will really help with the strength of the frame and make it respond quicker to steering input. Less wasted HP going into twisting the frame so more gets to the ground too.

Pop's C-10 · 10-25-2010, 11:43 AM

shaping up nice

smokedat · 10-26-2010, 05:27 PM

I got my hinges and springs back they turned out good

smokedat · 10-26-2010, 05:33 PM

finished spraying the frame and the rear end just waiting to dry then il put it back together. I sprayed this in my garage it ruind the floor its all sticky.

Sooner84 · 10-26-2010, 05:38 PM

Very nice! I love that blue.

RandyP · 10-26-2010, 05:53 PM

Sherwin Williams sells a product you spray on the floor (bug sprayer) that creates a tacky film that washes away (along with overspray). Also most guys who are spraying in their garage/shop will at least wet the floor down while spraying to avoid overspray on the ground (and help with dirt/dust). Just a helpful hint, especially on the Sherwin Williams product (product # is 55 in case you want to get some).

Of course, after you're all done painting, it would be a perfect time to put a nice coating down on your garage floor. Perfect excuse to do it too!

Oh, and I love that color as well. Nice shade of blue there.

smokedat · 10-26-2010, 10:40 PM

Heres how it shines with direct sun light

RandyP · 10-27-2010, 07:50 AM

Very nice. The shine and depth are awesome. Forget coating your garage floor, you're going to want a mirrored floor to show that off!

mooseknuckles · 10-27-2010, 10:27 PM

Quote:

Originally Posted by smokedat

finished spraying the frame and the rear end just waiting to dry then il put it back together. I sprayed this in my garage it ruind the floor its all sticky.

I think you ruined your creeper too! lol.

smokedat · 10-30-2010, 11:21 PM

Thanks glad you liked it.

Quote:

Originally Posted by RandyP

Very nice. The shine and depth are awesome. Forget coating your garage floor, you're going to want a mirrored floor to show that off!

smokedat · 10-30-2010, 11:22 PM

Can you believe it was once red lol

Quote:

Originally Posted by mooseknuckles

I think you ruined your creeper too! lol.

smokedat · 10-30-2010, 11:28 PM

I got the rear set up installed, but I am stil waiting on the coilovers dude from ride thech said the shock bodys are in backorder hopefully they get them in soon. For the spring rates I went with 250 lbs. Here are a few pics sure looks purdy

VA72C10 · 10-31-2010, 12:06 AM

Awesome build man! Can't believe I missed it until now...

smokedat · 11-05-2010, 01:07 AM

Still waiting on the coilevers but i managed to POR 15 silver the entire bottom belly from cab to bed heres a pic

LiveAnimals · 11-05-2010, 04:05 AM

B E A Utiful

mcbassin · 11-05-2010, 08:45 AM

Super sweetness!

Pop's C-10 · 11-05-2010, 09:38 AM

nice

**nlped** · 11-05-2010, 11:19 AM

I think you should have painted it blue...

Looks awesome!

qu1cks1lver56 · 11-05-2010, 03:11 PM

wow nice work, when you finish yours wanna come do mine? :P

kvn1011 · 11-05-2010, 04:47 PM

Posted via Mobile Device
Posted via Mobile Device

v502 · 11-06-2010, 08:54 PM

Damn that looks awesome !!!
Your going to love the Zr1 paint job. My truck color is exactly the same color.

smokedat · 11-10-2010, 08:37 PM

Thanks for the compliments. Update the coilovers finally got here, they are Ridetechs New adjustable coilevers with 250 lbs spring rate.

smokedat · 11-10-2010, 08:40 PM

adjustable knob hangs on top

v502 · 11-11-2010, 02:24 AM

Awesome love the setup only pic that is missing is how car looks and how it sits.

10-25-2010, 05:40 AM	#451
v502 Registered User Join Date: Oct 2009 Location: Portland, OR Posts: 198	Re: LS1 into a 73 cheyenne Sounds evil __________________ C10 Stepside Swap with 6.2 L92 & 6SP Auto 6L90 "Brain Check" Project

10-25-2010, 11:43 AM	#453
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: LS1 into a 73 cheyenne shaping up nice

10-26-2010, 05:27 PM	#454
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I got my hinges and springs back they turned out good Attached Images

10-26-2010, 05:33 PM	#455
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne finished spraying the frame and the rear end just waiting to dry then il put it back together. I sprayed this in my garage it ruind the floor its all sticky. Attached Images Last edited by smokedat; 10-26-2010 at 05:35 PM.

10-26-2010, 05:38 PM	#456
Sooner84 Registered User Join Date: Dec 2009 Location: Moore, Oklahoma Posts: 379	Re: LS1 into a 73 cheyenne Very nice! I love that blue. __________________ 1984 chevy swb(1st truck, sold..) 2001 RCSB silverado, 5.3 with a little extra 2004 ECSB Silverado LT, 5.3 cam & bolt ons, 4l60e shift kit/stall, g80 & 3.73s My first (1984 c10) Build

10-26-2010, 05:53 PM	#457
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: LS1 into a 73 cheyenne Sherwin Williams sells a product you spray on the floor (bug sprayer) that creates a tacky film that washes away (along with overspray). Also most guys who are spraying in their garage/shop will at least wet the floor down while spraying to avoid overspray on the ground (and help with dirt/dust). Just a helpful hint, especially on the Sherwin Williams product (product # is 55 in case you want to get some). Of course, after you're all done painting, it would be a perfect time to put a nice coating down on your garage floor. Perfect excuse to do it too! Oh, and I love that color as well. Nice shade of blue there. __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools. Last edited by RandyP; 10-26-2010 at 05:54 PM.

10-26-2010, 10:40 PM	#458
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Heres how it shines with direct sun light Attached Images Last edited by smokedat; 10-26-2010 at 10:40 PM.

10-27-2010, 07:50 AM	#459
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: LS1 into a 73 cheyenne Very nice. The shine and depth are awesome. Forget coating your garage floor, you're going to want a mirrored floor to show that off! __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools.

10-30-2010, 11:28 PM	#463
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne I got the rear set up installed, but I am stil waiting on the coilovers dude from ride thech said the shock bodys are in backorder hopefully they get them in soon. For the spring rates I went with 250 lbs. Here are a few pics sure looks purdy Attached Images

10-31-2010, 12:06 AM	#464
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: LS1 into a 73 cheyenne Awesome build man! Can't believe I missed it until now... __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-05-2010, 01:07 AM	#465
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Still waiting on the coilevers but i managed to POR 15 silver the entire bottom belly from cab to bed heres a pic Attached Images

11-05-2010, 04:05 AM	#466
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: LS1 into a 73 cheyenne B E A Utiful __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

11-05-2010, 08:45 AM	#467
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Super sweetness! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-05-2010, 09:38 AM	#468
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: LS1 into a 73 cheyenne nice

11-05-2010, 11:19 AM	#469
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: LS1 into a 73 cheyenne I think you should have painted it blue... Looks awesome! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha



Register or Log In To remove these advertisements.

11-05-2010, 03:11 PM	#470
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: LS1 into a 73 cheyenne wow nice work, when you finish yours wanna come do mine? :P __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526

11-05-2010, 04:47 PM	#471
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: LS1 into a 73 cheyenne Posted via Mobile Device Posted via Mobile Device Last edited by kvn1011; 11-05-2010 at 04:49 PM.

11-06-2010, 08:54 PM	#472
v502 Registered User Join Date: Oct 2009 Location: Portland, OR Posts: 198	Re: LS1 into a 73 cheyenne Damn that looks awesome !!! Your going to love the Zr1 paint job. My truck color is exactly the same color. __________________ C10 Stepside Swap with 6.2 L92 & 6SP Auto 6L90 "Brain Check" Project

11-10-2010, 08:37 PM	#473
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Thanks for the compliments. Update the coilovers finally got here, they are Ridetechs New adjustable coilevers with 250 lbs spring rate. Attached Images

11-10-2010, 08:40 PM	#474
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne adjustable knob hangs on top Attached Images

11-11-2010, 02:24 AM	#475
v502 Registered User Join Date: Oct 2009 Location: Portland, OR Posts: 198	Re: LS1 into a 73 cheyenne Awesome love the setup only pic that is missing is how car looks and how it sits. __________________ C10 Stepside Swap with 6.2 L92 & 6SP Auto 6L90 "Brain Check" Project

Register or Log In To remove these advertisements.