AZ 3 point shoulder belts

[davischevy]

t korinek, as I understand it, military green belts have green buckles. If that is correct, I need a set with center belt in military green.

Thanks

[t korinek]

Sorry about the late response I thought I sent a reply last week.

72 peace yes the buckles do paint match for the 3008 medium beige.
Davis Chevy I have a set of the military green in stock they have the buckles painted green as well.

[72peace]

I have buddy buckets in a 70, cause i like them, would that cause any issues with a regular set? If not, please cost out a set with center belt in the 3008 Med Beige.

Cheers,
Nathan

[72peace]

Anyone heard from Tom?

[t korinek]

72 peace cost is still $350 for the set of 3, I don’t see why it would cause a problem to use bench belts, rather than the short bucket seat standoff, since they didn’t use that style until 1973 anyways.
There will be a longer end you will have to tuck in when not in use, but will also give extra length if you need it.

Still 4-8 weeks wait time, which is out of my control.

Thanks
Tom

[72peace]

Originally Posted by t korinek

72 peace cost is still $350 for the set of 3, I don’t see why it would cause a problem to use bench belts, rather than the short bucket seat standoff, since they didn’t use that style until 1973 anyways.
There will be a longer end you will have to tuck in when not in use, but will also give extra length if you need it.

Still 4-8 weeks wait time, which is out of my control.

Thanks
Tom

Copy, didn’t see PayPal address, can you provide?

Cheers,
Nathan

[FRCvette]

PM sent

[FRCvette]

Sent another PM

[MDFarms]

Any pics of the white to match the parchment colored interior?

[Larry S]

I assume Id need power blue. Is there a back order on those. I need full set left, right , center. Im not ready yet. Just curious if there is a delay.

[t korinek]

Larry, powder blue would be the closest match, the wait time varies from 1-3 months to get made.

Mdfarms, check post #60 in this thread to see a comparison of the oe parchment belts compared to the colors available now.

Thanks

[davischevy]

If the green ones come with GM decals for the buttons, I will take them.

[f.flujan]

Would like a a complete set, with lap belt as well. Not sure if I should go with medium beige or dark brown. Are belt’s normally darker than the seats ? 🙂
What would be the total shipped to 92584
Posted via Mobile Device

[f.flujan]

Originally Posted by f.flujan

Would like a a complete set, with lap belt as well. Not sure if I should go with medium beige or dark brown. Are belt’s normally darker than the seats ? 🙂
What would be the total shipped to 92584
Posted via Mobile Device

This is the color I’m using for the seats
Posted via Mobile Device

[HeavyHauler]

Originally Posted by t korinek

72 peace cost is still $350 for the set of 3, I don’t see why it would cause a problem to use bench belts, rather than the short bucket seat standoff, since they didn’t use that style until 1973 anyways.
There will be a longer end you will have to tuck in when not in use, but will also give extra length if you need it.

Still 4-8 weeks wait time, which is out of my control.

Thanks
Tom

Hey Tom!

I need a full set of 3 point belts in flame red with the flame red original looking fisher style buckles for a 1968 Chevy C10 Shortbed with Bench Seat.

Are they still $350 for a full complete set? I need all the belts to make a complete set. How do I pay you and what is the approximate wait time?

[t korinek]

Heavy hauler only the buckle style from post 1 are available, oe style fisher buckles are not available any longer.
They are $360 a set of 3

Fflujan. The dark brown would be a close match to the color of your material, they are $360 for a set of 3 with the buckles that are in post # 1

Thanks
Tom

[HeavyHauler]

Originally Posted by t korinek

Heavy hauler only the buckle style from post 1 are available, oe style fisher buckles are not available any longer.
They are $360 a set of 3

Fflujan. The dark brown would be a close match to the color of your material, they are $360 for a set of 3 with the buckles that are in post # 1

Thanks
Tom

Ok and thanks! I only wanted them because they were available with the factory style fisher plastic buckles so they would look somewhat factory. I appreciate your response and thanks again!

[Jason Banks]

Hi Tom,

Would it be possible to get a passenger side only in dark brown? I got something on mine and need a replaement.

[vespaholic]

Do you have proper mounting hardware for a 1972 Blazer?
I'd use my roll bar for the upper mount.
Please advise.
Thanks

[davischevy]

Tom, I need a set of military green with green buckles.

[zicc1835]

Hi Tom
been a long time.... if you are still offering these belts I would like a set im thinking Tan I believe the number is 3000 not sure ill look again im good with the buckles in post #1 if that's what is offered ...all of my interior trim ( door panels , arm rests visor etc. are done in a Buckskin color) closely matches the material on the buddy buckets please let me know what your thoughts are on color to get as close to a light saddle as possible
Thanks
Jess

[Jason Banks]

I don't think Tom is around. He never answered my question from 2022

[zicc1835]

thanks for letting me ...well I hope everything is ok with him ...met him a few years back when I was out that way

[Getter-Done]

He stays pretty busy.

I have got in touch with him by his website and PM's.

Here is a link to his Business.

Link: https://www.facebook.com/truckinkrazy/

Hope this Helps.

He is a Great Guy to do business with.

[zicc1835]

Originally Posted by Getter-Done

He stays pretty busy.

I have got in touch with him by his website and PM's.

Here is a link to his Business.

Link: https://www.facebook.com/truckinkrazy/

Hope this Helps.

He is a Great Guy to do business with.

thank you very much 10-4 on great guy to do business I tried to send a email to info@truckincrazy.com server wouldn't take it ill try on FB thanks again ill keep trying