What did you do to your truck today.The 3rd chapter

[Steeveedee]

Originally Posted by 72c20customcamper

I just painted everything black since it’s a driver

'72 Fremont truck, early in the production year. That's looking really nice!

Oh yeah, I went to a local car show. Lots of vehicles, from over 90 years to the present. I remember when a Model T ford was only a few decades old.

[Rust_never_sleeps]

Got my AM tuner unfrozen, got my BT unit and speaker switch mounted.
Next we find out if the AM unit works with the speakers....if it still works at all ;-)

[KQQL IT]

Polished the Mickeys ordered lugs and caps

[Chevys4life]

Originally Posted by KQQL IT

Polished the Mickeys ordered lugs and caps

They look very nice and can't wait to see them on your truck.

[CAMAROBOY68SS]

Originally Posted by 71CHEVYSHORTBED402

That's one of the nicest trucks I've seen.

Thank you, it came out all right for a fully homebuilt truck.

[72c20customcamper]

Did a lot of running around but managed to get the front sway bar painted and the new bushings installed

[67C10Step]

Finished up the power steering install by securing the lines and re-installing the inner fender. Wife and I took it on about an hour drive. Now on to finishing up the rear bumper.

[KQQL IT]

Duplicate

[KQQL IT]

Speedo diagnosis.

Yep that's the problem area.

[72c20customcamper]

Electrolysis rust removal on the manifolds . Found a crack in one so I’ll be doing some welding next week .

['68OrangeSunshine]

Originally Posted by 72c20customcamper

Electrolysis rust removal on the manifolds . Found a crack in one so I’ll be doing some welding next week .

Neat process.
I had a crack in the drivers side manifold of the 454 BBC in my '67 K/10 Sub. I tried JB Weld. Unlike the claims on the package side, it burned off after a while.
There were Ram Horn exhausts on the small block in my '71 GMC Jimmy when I bought it. After It sucked a couple of valves [#6 + #7], I bought a Mr Goodwrench crate motor 350. I noticed the exhausts were different. The RH one had tapped bores for A.I.R. but the LH was pre-Emissions. I didn't like the possibility of different backpressures, so I got Headman headers.

[Chevys4life]

Originally Posted by 72c20customcamper

Electrolysis rust removal on the manifolds . Found a crack in one so I’ll be doing some welding next week .

Now that is a neat trick and I see it works very well!!!

[doug_p]

Pulled the TKX 5 spd, clutch and bellhousing off my engine to prep for the 6 speed I am adding . . .

[67C10Step]

Finished up the fabrication part of my rear bumper build and got it in primer. A light sanding and paint is on the agenda next with plans for an install this weekend.

[72c20customcamper]

I tried and my welding guy tried to weld up the crack . No go the cast is so porous it just opens up . So it looks like a new set is in order . I even painted the passenger side .

[72c20customcamper]

Originally Posted by Chevys4life

Now that is a neat trick and I see it works very well!!!

Yes it does it was only in the bath for about two hours

[mr.mud1]

i pulled my truck and trailer out from winter hibernation,unloaded the truck and started getting the old girl cleaned up for this weekend and the 50th Annual Radical Speed Sport Show in Moncton,New Brunswick,about an hour from here.Chip Foose is coming and lots of very nice machinery.my truck did well at this show last year,maybe we can do it again?

[Jiggers72-GMC]

Very nice truck ^^^ hope you get nice weather, it's been nasty here in North Bay Ont

[Sheepdip]

You got my vote!! Love your truck!

[mr.mud1]

Originally Posted by Jiggers72-GMC

Very nice truck ^^^ hope you get nice weather, it's been nasty here in North Bay Ont

i hear ya.we've had some nice weather but calling for a 30% chance of showers in the morning,hopefully if it rains,it's early and i'll make tracks for Moncton.it'll all work out.thanks.

['68OrangeSunshine]

I was checking fuses on my new-to-me 2003 Tahoe. [Weird electric window issues.] When I dropped something, so I crawled under the motor.
I didn't find the tiny piece I had lost but I did find a 1'' piece of blue sparkplug wire. I had moved the '71 Jimmy out rom under the carport so I could check on the Tahoe in the shade. The Jimmy had run rough, but I thought it was just a cold engine.
I looked under the hood and found a packrat had chewed thru the #5 cylinder plug wire. No. 5 is hard to get to on a 4-Speed truck with Power Steering. I found a used plug wire I can try, but I'm not sure I got the terminal to click on the sparkplug tip.
I'll get back after it tomorrow. The sun went down on me today.

[Jim Boy]

I took out a mortgage and ordered a set of tires.

[72c20customcamper]

Well the whole not doing the “While it’s apart deal “ went out the window .

[67C10Step]

Originally Posted by 72c20customcamper

Well the whole not doing the “While it’s apart deal “ went out the window .

Scope creep! It gets us all at some point.

[72c20customcamper]

Originally Posted by 67C10Step

Scope creep! It gets us all at some point.

No I’m eying the Lugnut rear disc conversion .