|
11-11-2012, 06:50 PM | #1 |
Registered User
Join Date: Feb 2012
Location: So. Cali.
Posts: 2,652
|
Re: What did you do to your truck today!
Actually ;
I opened them up to .065" before it'd go further than 150 miles before fouling several at one time , this after I'd up graded to '77 HEI system . The valve guides are looser than madonna's knees ~ it uses oil (but doesn't smoke much) at a prodigious rate , I'm sure opec will be sending me Christmas Cards this year . I really need to get the rebuilt head on it but I'm still chasing parts...
__________________
-Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH |
11-11-2012, 06:53 PM | #2 | |
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: What did you do to your truck today!
Quote:
The sun came out today, so I finished up the head/parking light switch and the "dummy" choke button set up. Replaced the hand-brake and the hand brake cover. Put the steering wheel on loosely for a "final" test fit. You might notice the little button on the dash next to the ashtray. I got sick of screwing around with the horn. And, the hole was already there...Some P.O. got drill-happy, I guess. Now, it's a teeny horn button. Oops! Can't see it in these pics....
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. Last edited by magwakeenercew2jh; 11-11-2012 at 07:07 PM. |
|
11-11-2012, 07:22 PM | #3 |
Registered User
Join Date: Dec 2011
Location: Creighton Sask. Canada
Posts: 4,121
|
Re: What did you do to your truck today!
Nice wheel mag, really nice and VW I see now with the guides that worn out but may be defeating yourself with a gap that wide, may not jump the gap as easily and foul the plugs especially without an ignition upgrade, maybe drop the gap to .055 or even .050 and try that may help. I have used the .065 gap like Olds or Buicks did back in the day of first HEI's and found it was a bit wide and dropped it back and the plugs cleared up, worth a shot anyway or as i have done before miled engines just switched up to a platinium tip plug with the small pos. electrode and it doesn't foul nearly as easily, I use the same for running an engine a bit fat on stuff we 1/4 mile.
|
11-18-2012, 11:04 PM | #4 | |
Registered User
Join Date: Sep 2011
Location: Neodesha, Kansas
Posts: 151
|
Re: What did you do to your truck today!
Quote:
|
|
11-12-2012, 11:59 AM | #6 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: What did you do to your truck today!
That looks sweet...wish my welds were half as nice.
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
11-14-2012, 11:30 AM | #7 |
Registered User
Join Date: Jan 2012
Location: Yakima WA
Posts: 31
|
Re: What did you do to your truck today!
I traded my 71 GMC 2wd for an 85 Chevy K20... Sorry guys! I've really enjoyed this board and the 71 drove like a dream but I really wanted a 4x4 and this was too good of a trade to pass on. Maybe I'll be back someday.
Posted via Mobile Device |
11-14-2012, 08:20 PM | #8 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,037
|
Re: What did you do to your truck today!
No need to leave....we do square bodies too.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
11-14-2012, 10:43 PM | #9 |
Registered User
Join Date: Sep 2012
Location: San Antonio, TX
Posts: 1,026
|
Re: What did you do to your truck today!
Rebuilt my front end on my 72. Wow lots of work!
Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device
__________________
Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior |
11-14-2012, 11:54 PM | #10 |
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: What did you do to your truck today!
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. |
11-14-2012, 11:57 PM | #11 |
Registered User
Join Date: Sep 2012
Location: San Antonio, TX
Posts: 1,026
|
Re: What did you do to your truck today!
Thanks! Was able to use just about all ac delco parts as well.
Posted via Mobile Device
__________________
Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior |
11-16-2012, 04:59 PM | #12 |
Big Block
Join Date: Mar 2005
Location: Durham, N.C.
Posts: 1,649
|
Re: What did you do to your truck today!
|
11-18-2012, 09:41 PM | #13 |
Registered User
Join Date: Mar 2011
Location: bolivar, mo
Posts: 839
|
Re: What did you do to your truck today!
Well, I finally got the under side of the cab finished today.
We did alot of welding to the cab floors while it was still on the chassis, then I put it on the rotissary to finish up the bottom. Got all the pcs welded in on the bottom, seam sealed every joint and seam underneath, two coats of por 15. Now its time to lower it back down and seal/coat the floors top side. Not too far from getting the cab in epoxy primer like the front clip and bed. Very soon it will be time to play mechanic instead of bodyman. On to the frame!!
__________________
1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030 |
11-14-2012, 11:52 AM | #14 |
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: What did you do to your truck today!
Restored my back bumper for next to nothing. Here's the thread with pictures
http://67-72chevytrucks.com/vboard/s...d.php?t=551823 Posted via Mobile Device |
11-14-2012, 02:41 PM | #15 |
Registered User
Join Date: Jul 2010
Location: MD
Posts: 1,937
|
Re: What did you do to your truck today!
I drove it, again. My lady friend and I took rode some back roads and did some hiking to enjoy the fall colors. Happy my truck is in a place where it runs & drives like new, and doesn't need anything.
__________________
1969 c-10 Step Side Long Bed. I-6 250cid = = 1969 Pontiac GTO hard top. 400, 4-speed. |
11-14-2012, 08:14 PM | #16 |
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: What did you do to your truck today!
Just climbed out from underneath. Adjusted the hand-brake and put a new
do-whackie three-sided fork thing on the trans shifting linkage (TH350). There was some slop in the shifter. And I had that nice new chunk of linkage in my stash. Now there's no slop in the shifter. Of course, I forgot that I adjusted the column WITH the slop. Which means that now I have to adjust it, or the linkage up top, to get the pointer just perfect. Yeah. That's for another day.
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. |
11-14-2012, 08:18 PM | #17 | |
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: What did you do to your truck today!
Quote:
Took your lady friend on the back roads hiking and enjoying fall colors, eh? Sounds like a Cinemax soft porn plot... Hopefully you made the most of it! Lol Posted via Mobile Device |
|
11-14-2012, 11:53 PM | #18 |
Registered User
Join Date: Feb 2012
Location: Ventura,Ca
Posts: 745
|
Re: What did you do to your truck today!
I attempted to get my lights working, that suddenly decided to go south with my stereo. Got my dash, running and dome light back. Radio too. Still no brake lights though.
__________________
'67 C20 LBW |
11-15-2012, 01:02 AM | #19 |
Registered User
Join Date: Sep 2005
Location: Kansas
Posts: 774
|
Re: What did you do to your truck today!
Started cleaning up the 406. Has a blown head gasket right now. Putting this in my truck this winter. Going to change some things, different valve covers, electric water pump, and harmonic balancer. Has over 400HP.
__________________
1972 C10 LWB- 4.5 Front and 5 Rear Drop, 406/TH350 1966 Caprice 1968 Impala (Frame Off LSX Project) 2001 Tahoe LT 2013 Hyundai Elantra 2010 Kawasaki Z1000 |
11-15-2012, 07:18 PM | #20 |
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: What did you do to your truck today!
Pulled the stock non-tilt steering column out of the truck (it actually came out in 2 pieces...the bearing were completely shot). Everytime I work on this truck and replace parts, I find it more and more amazing that I survived the drive home from Tennessee considering the pieced together manner its in currently. I'll be putting in a rebuilt tilt column hopefully tomorrow...come on UPS!!!
|
11-15-2012, 09:29 PM | #21 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: What did you do to your truck today!
Got the console in and covered.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
11-15-2012, 09:59 PM | #22 |
Registered User
Join Date: Oct 2012
Location: Honolulu,hi
Posts: 19
|
Re: What did you do to your truck today!
Started cleaning the chassis today (oil leaks)
Fixed driver side window regulator Po had wrong starter . Put in a brand new one. Made a new battery cable . Po had it touching the dip stick Killed my distributor put a new one in yesterday Posted via Mobile Device |
11-15-2012, 10:07 PM | #23 |
Registered User
Join Date: Sep 2011
Location: New Melle, MO
Posts: 104
|
Re: What did you do to your truck today!
Drove it!
|
11-15-2012, 11:59 PM | #24 |
Registered User
Join Date: Feb 2012
Location: Ventura,Ca
Posts: 745
|
Re: What did you do to your truck today!
Picked up a 700r4 for my truck. Gas mileage hopefully to improve!!
__________________
'67 C20 LBW |
11-16-2012, 12:06 AM | #25 |
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: What did you do to your truck today!
Let us know....PLEEEEEZE!!!!???
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. |
Bookmarks |
|
|