New 64 Stepper Project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 01-09-2016, 04:45 PM

Christmas was good to me.

We are still in California.
I just posted one pic even though I have two of each steps, lower cab mud guard, CaptainFabs power steering bracket etc:

Bunch of "stuff" lower A-Arm u-bolts, rear axle brake line clamps (CPP), Trailing arm bushings . . .:

Fuel Line parts:

Master brake parts, line and CaptainFabs bracket:

**The Rocknrod** · 01-09-2016, 04:48 PM

15" Steering Wheel:

Eaton 30 Spline Posi, Richmond Gear Ring & Pinion, Master install kit:

Mossier 30 Spline Axles, lugs:

**The Rocknrod** · 01-09-2016, 04:50 PM

I had a great set of hood hinges, sent them to Cadilac plating to get them Yellow/gold zinc plated, then clear-coated:

**The Rocknrod** · 01-09-2016, 05:05 PM

Almost forgot - the front of the hood has some pin holes in it after blasting and epoxy priming, so I bought the upper and lower front hood sheet-metal so that should take care of that.

**The Rocknrod** · 01-11-2016, 12:45 PM

Trying to locate the two seals that are top of the front fenders at the firewall cowl area.

**The Rocknrod** · 02-06-2016, 01:50 PM

Update - I went with a POL Trac Bar as the Early Classic would hit the frame when it was all the way lowered (just in case)

**The Rocknrod** · 03-06-2016, 12:13 PM

Got my rear disc brake kit in, came with most everything needed (one side shown).

**The Rocknrod** · 04-22-2016, 04:20 PM

Also bought an electric emergency brake set-up.

**The Rocknrod** · 06-04-2016, 09:57 AM

Still working in Cal. but found Ricks Radiator in Azuza and bought a Aluminum Desert Cooler by US Radiator - at a KILLER price.

**The Rocknrod** · 07-30-2016, 07:22 PM

"Finally" got the powdercoating work back (almost four weeks) and began assembling the goodies. Upgraded to the larger lower control arm U Bolts as well.

**The Rocknrod** · 08-18-2016, 06:20 PM

Installing the rear end, trailing arms, track bar, sway bar etc. Got the fuel and brake lines installed.

Johns66 · 08-18-2016, 07:50 PM

Quote:

Originally Posted by The Rocknrod

Installing the rear end, trailing arms, track bar, sway bar etc. Got the fuel and brake lines installed.

After you get do e with yours come back to woodway, I'll sell you some more parts to go with the hood you bought and you can help me put mine together.

Looks good.

John

**The Rocknrod** · 08-19-2016, 08:14 AM

Quote:

Originally Posted by Johns66

After you get do e with yours come back to woodway, I'll sell you some more parts to go with the hood you bought and you can help me put mine together.

Looks good.

John

Hey John, I lost your number. PM me it. I DO need some parts.

You need help?

ol_skool_chevy · 08-19-2016, 08:53 AM

Very nice truck

**66ChevyMax** · 08-19-2016, 09:14 AM

Wow, Gauges and Chassis looks great, glad to see the purple gone!

Bomp · 08-19-2016, 12:00 PM

Man, you're serious on doing this truck right.

**The Rocknrod** · 08-19-2016, 12:42 PM

It's a sickness.

**The Rocknrod** · 08-26-2016, 11:19 AM

Getting Ready to send it to paint.

thepartsguy · 08-27-2016, 10:24 PM

Very cool

**66ChevyMax** · 08-27-2016, 11:19 PM

Gonna be a sweet ride!

**The Rocknrod** · 09-20-2016, 09:33 AM

At the paint shop now.

phraza · 09-25-2016, 04:30 AM

Epic build!

Looking forward to seeing the color

**Palf70Step** · 09-25-2016, 08:24 AM

Very Nice. Where did you find the steering wheel?

**The Rocknrod** · 09-25-2016, 08:40 AM

Quote:

Originally Posted by Palf70Step

Very Nice. Where did you find the steering wheel?

They're called American Retro steering wheels. Got this one from Speedway.

**Palf70Step** · 09-25-2016, 01:33 PM

Quote:

Originally Posted by The Rocknrod

They're called American Retro steering wheels. Got this one from Speedway.

Thank you. That is really good looking

01-09-2016, 04:45 PM	#26
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Christmas was good to me. We are still in California. I just posted one pic even though I have two of each steps, lower cab mud guard, CaptainFabs power steering bracket etc: Bunch of "stuff" lower A-Arm u-bolts, rear axle brake line clamps (CPP), Trailing arm bushings . . .: Fuel Line parts: Master brake parts, line and CaptainFabs bracket: __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 01-09-2016 at 05:06 PM.

01-09-2016, 04:48 PM	#27
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project 15" Steering Wheel: Eaton 30 Spline Posi, Richmond Gear Ring & Pinion, Master install kit: Mossier 30 Spline Axles, lugs: __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-09-2016, 04:50 PM	#28
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I had a great set of hood hinges, sent them to Cadilac plating to get them Yellow/gold zinc plated, then clear-coated: __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-09-2016, 05:05 PM	#29
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Almost forgot - the front of the hood has some pin holes in it after blasting and epoxy priming, so I bought the upper and lower front hood sheet-metal so that should take care of that. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-11-2016, 12:45 PM	#30
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Trying to locate the two seals that are top of the front fenders at the firewall cowl area. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-06-2016, 01:50 PM	#31
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Update - I went with a POL Trac Bar as the Early Classic would hit the frame when it was all the way lowered (just in case) __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 12-03-2016 at 10:27 AM.

03-06-2016, 12:13 PM	#32
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got my rear disc brake kit in, came with most everything needed (one side shown). __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-22-2016, 04:20 PM	#33
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Also bought an electric emergency brake set-up. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-04-2016, 09:57 AM	#34
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Still working in Cal. but found Ricks Radiator in Azuza and bought a Aluminum Desert Cooler by US Radiator - at a KILLER price. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-30-2016, 07:22 PM	#35
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project "Finally" got the powdercoating work back (almost four weeks) and began assembling the goodies. Upgraded to the larger lower control arm U Bolts as well. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 12-03-2016 at 10:22 AM.

08-18-2016, 06:20 PM	#36
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Installing the rear end, trailing arms, track bar, sway bar etc. Got the fuel and brake lines installed. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-19-2016, 08:53 AM	#39
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: New 64 Stepper Project Very nice truck __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

08-19-2016, 09:14 AM	#40
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: New 64 Stepper Project Wow, Gauges and Chassis looks great, glad to see the purple gone! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

08-19-2016, 12:00 PM	#41
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: New 64 Stepper Project Man, you're serious on doing this truck right.

08-19-2016, 12:42 PM	#42
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project It's a sickness. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

08-26-2016, 11:19 AM	#43
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Getting Ready to send it to paint. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-27-2016, 10:24 PM	#44
thepartsguy Registered User Join Date: Dec 2009 Location: Kalispell, MT. Posts: 90	Re: New 64 Stepper Project Very cool __________________ 63 C10 65 Chevy Custom Cab w/ Big Back Window 66 C30 72 skylark w/ 454 65 K10 May the bridges I burn light the way....

08-27-2016, 11:19 PM	#45
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: New 64 Stepper Project Gonna be a sweet ride! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

09-20-2016, 09:33 AM	#46
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project At the paint shop now. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-25-2016, 04:30 AM	#47
phraza Registered User Join Date: Jun 2016 Location: Auckland, New Zealand Posts: 146	Re: New 64 Stepper Project Epic build! Looking forward to seeing the color __________________ Fraser - New Zealand 1964 Chevy C10 Stepside 350 V8 Build thread here

09-25-2016, 08:24 AM	#48
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,082	Re: New 64 Stepper Project Very Nice. Where did you find the steering wheel? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.