1963 GMC C30 panel truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AJCK87 · 05-26-2015, 12:50 PM

Read for some fresh steel

AJCK87 · 05-28-2015, 01:43 PM

On to rear door latches and hinges, time to fire up the lathe.

AJCK87 · 05-28-2015, 01:44 PM

...

AJCK87 · 05-28-2015, 01:46 PM

The latch turned out awesome and so did the first barn door hinge. Used custom turned brass bushings and shoulder bolts for the pin. Tough enough to last another 50 years hahaha

AJCK87 · 05-28-2015, 01:47 PM

....

AJCK87 · 08-28-2015, 11:51 AM

Progress! I have been back on the panel here and there. Where does the time go in the summer? I have the barn door hinges complete, they turned out awesome and glide super nice with the brass bushings.

AJCK87 · 08-28-2015, 12:01 PM

Front fender supports. Pleased that these are in such good shape.

AJCK87 · 08-28-2015, 12:05 PM

Referbished the licence plate light. The rubber gasket was in good shape, cleaned up the lens and housing. Changed out the conventional bulb for a LED panel.

AJCK87 · 08-28-2015, 12:10 PM

New master! Didn't ask for Chrome, should work out though hahaha

AJCK87 · 08-28-2015, 12:14 PM

The booster. Mmmm shiny.

deejaaa1 · 11-07-2015, 03:21 PM

great progress so far.
we were at Brightsand Regional Park in SK this last summer.

AJCK87 · 11-07-2015, 04:27 PM

Quote:

Originally Posted by deejaaa1

great progress so far.
we were at Brightsand Regional Park in SK this last summer.

Thanks! I'm excited things keep moving along. Saskatchewan has some beauty Whitetails. Would be a cool hunt. I had the opportunity to participate in a duck and goose hunt in Manitoba and it was a blast!!

62stepside longbox · 11-07-2015, 07:21 PM

Good work and nice find on the parts. Good to see another b.c. Member on here

AJCK87 · 11-07-2015, 09:07 PM

Quote:

Originally Posted by 62stepside longbox

Good work and nice find on the parts. Good to see another b.c. Member on here

Thanks! Beauty, we were just hunting out that way, bear main and esperon.

Free Candy Inside · 11-08-2015, 10:46 AM

Coming along nice

AJCK87 · 11-08-2015, 12:55 PM

Quote:

Originally Posted by Free Candy Inside

Coming along nice

Thanks! Can't wait to get her on the road. It's nice to see you driving yours around!

AJCK87 · 11-08-2015, 03:52 PM

The new rear bumper!

AJCK87 · 11-08-2015, 03:53 PM

With the brackets....

AJCK87 · 11-08-2015, 03:54 PM

The rear sil plate with cross member.

**Palf70Step** · 11-27-2015, 08:30 AM

Truck is coming along. I am really interested to see how it all comes together.

AJCK87 · 11-27-2015, 11:15 AM

Quote:

Originally Posted by Palf70Step

Truck is coming along. I am really interested to see how it all comes together.

Thanks! I have been pushing to get things done. Going to be working on sand blasting the rest of the rear sil and cross member tomorrow and continuing work on the gauge cluster the following week. I have been thinking about what type of wood to use for the gauge panel, I have access to some pacific yew wood at a local mill and the hardware store has a bunch of different exotic woods to.... I want to go with yew for the bed wood so I'm leaning towards the yew for the dash.

**Captainfab** · 11-28-2015, 01:29 AM

It sounds like this will be a cool panel when done

What is that gauge cluster from?

AJCK87 · 11-28-2015, 01:56 AM

Quote:

Originally Posted by Captainfab

It sounds like this will be a cool panel when done

What is that gauge cluster from?

Thanks! The gauge cluster is out of a 1992 Dodge, will just plug right into wiring harness I have for the 5.9 Cummins motor I will be using.

deejaaa1 · 11-30-2015, 02:53 AM

love the 12v and wish i was working on one for mine.

AJCK87 · 12-09-2015, 12:38 AM

Got down to the shop this past weekend. Started to remove a few more parts. Pulled the steering column, master cylinder and a bunch of the wiring. Looking to pull the engine in a couple of weeks. My brother in law wants it to replace the 305 in his 77 Monte Carlo, should just slam in

05-26-2015, 12:50 PM	#1
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Read for some fresh steel Attached Images

05-28-2015, 01:43 PM	#2
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck On to rear door latches and hinges, time to fire up the lathe. Attached Images

05-28-2015, 01:44 PM	#3
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck ... Attached Images

05-28-2015, 01:46 PM	#4
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck The latch turned out awesome and so did the first barn door hinge. Used custom turned brass bushings and shoulder bolts for the pin. Tough enough to last another 50 years hahaha Attached Images

05-28-2015, 01:47 PM	#5
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck .... Attached Images

08-28-2015, 11:51 AM	#6
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Progress! I have been back on the panel here and there. Where does the time go in the summer? I have the barn door hinges complete, they turned out awesome and glide super nice with the brass bushings. Attached Images

08-28-2015, 12:01 PM	#7
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Front fender supports. Pleased that these are in such good shape. Attached Images

08-28-2015, 12:05 PM	#8
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Referbished the licence plate light. The rubber gasket was in good shape, cleaned up the lens and housing. Changed out the conventional bulb for a LED panel. Attached Images

08-28-2015, 12:10 PM	#9
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck New master! Didn't ask for Chrome, should work out though hahaha Attached Images

08-28-2015, 12:14 PM	#10
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck The booster. Mmmm shiny. Attached Images

11-07-2015, 07:21 PM	#13
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1963 GMC C30 panel truck Good work and nice find on the parts. Good to see another b.c. Member on here __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

11-08-2015, 10:46 AM	#15
Free Candy Inside Registered User Join Date: May 2014 Location: Dayton, OH Posts: 752	Re: 1963 GMC C30 panel truck Coming along nice __________________ 63 1ton Paneltruck build: http://67-72chevytrucks.com/vboard/s...d.php?t=627721 Instagram: jaked937

11-08-2015, 03:52 PM	#17
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck The new rear bumper! Attached Images

11-08-2015, 03:53 PM	#18
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck With the brackets.... Attached Images

11-08-2015, 03:54 PM	#19
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck The rear sil plate with cross member. Attached Images



Register or Log In To remove these advertisements.

11-27-2015, 08:30 AM	#20
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,082	Re: 1963 GMC C30 panel truck Truck is coming along. I am really interested to see how it all comes together. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-28-2015, 01:29 AM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: 1963 GMC C30 panel truck It sounds like this will be a cool panel when done What is that gauge cluster from? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-09-2015, 12:38 AM	#25
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 GMC C30 panel truck Got down to the shop this past weekend. Started to remove a few more parts. Pulled the steering column, master cylinder and a bunch of the wiring. Looking to pull the engine in a couple of weeks. My brother in law wants it to replace the 305 in his 77 Monte Carlo, should just slam in Last edited by AJCK87; 12-09-2015 at 12:57 AM.

Register or Log In To remove these advertisements.