New and need advice on a 71 SWB - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nachos82 · 02-08-2007, 08:15 AM

Thanks for all the information fellas. I will be going on what you guys most all agree, this one is over priced for its condition. 72lb4x4, I am about 5 hours west of you in San Angelo (I am stationed at the Goodfellow air base). I have been over there to DFW though, to pick up my car I had shipped to Dallas. If you would not mind checking in on that truck I would greatly appreciate it. Like everyone has said, I have seen a lot of these trucks down here in Texas since I got here, this is actually the first one I have checked on. I was looking for an old car, but got burned out on finding tons of them that the owners would not sell. So, I decided to go to my favorite bodied truck ever and try my luck. Thanks for all the help though. Is there a general figure this truck is worth paying? I want to try and get some insight to how I can tell if a truck I find will be worth it or not. How much less are the longbeds costing also. Like I said, I don’t care if it is long or short bed, I love the bodies. I do not really like the stepsides though. If you can use this truck and its condition to tell me what a longbed would bring that would be great.

big blue 72 · 02-08-2007, 08:16 AM

Gotta agree with Andy on this one. There's gotta be at least a half gallon of bondo on that body.
Looks just like mine! He He HE!

timcos · 02-08-2007, 08:41 AM

When you life that carpet...there will be even more work you will see...I bet the floor is rusted out a bit...that rust along the weather stripping...also goes inward at lears the same amount...and maybe even more.

Lots of work...abut I would snatch it for no more than 1500 cause it is a SWB.

Tim

clean71 · 02-08-2007, 12:53 PM

I wouldn't pay more than $1200 for it. That one looks like it's hiding alot. Patience is the key with these. I paid $900 for my '71 swb with 87k original miles. Granted, it was a low option model but had far less rust than what that one has.

Nachos82 · 02-08-2007, 01:34 PM

Thanks for the info so far. By the sound of it I will keep looking around for a better one at a better price. I really don’t think the guy will part with it for less then $2800 or even more maybe. He was pretty set on the $3500 price and was really reluctant to want to sell it then. I do not mind working with a rusty project since that is what I usually get (originally from PA where most everything is rotted up). But if I can get a good start this time for a good price I will defiantly wait it out. Since I am now in the land of Texas where 40 year old frames look better then PA 10 year old ones I will wait. Thanks again fellas.

RACINJASON22 · 02-08-2007, 01:50 PM

Up here in the northeast that truck would sell to someone but I think were your at from what I've seen you probably should pass. In the end you are going to be the one that needs to be satisfied. Also you have to take into account what you want in the end. Meaning, No Rust Replaced Panels and Parts or Repaired Rust that Inevitably Always Seems to Come Back. For Example: The truck I bought has ten times the rust (I could stick my head through the bedside) only paid $610.00 off of ebay but It had a good frame and driveline and my plan from day one was to replace everything GOOD LUCK No matter what your decision.

panhandler62 · 02-08-2007, 02:10 PM

Prices vary considerably with locality because it costs a bit to transport these things. Some areas have a climate that preserves vehicles for centuries. Where I like, a plastic milk jug will rust in a month outside!

Around here you could get about $3000 for that truck but I think you can do a lot better for $3500 in Texas.

1971LT1SWBPOSI373 · 02-08-2007, 03:19 PM

To be perfectly honest I wouldn't give more than $500.00 for a truck like that. It has pending transmission issues, rocker panels that look like a piece of swiss cheeze, and a sh!tty coat of paint hiding all the cancer, no chrome, no trim, and the interior is trashed. Keep lookin'. It looks like a typical Northern truck thats been playing hard in a salt road environment. I have a SWB (in my Avitar) and the old girl is for the most part rock solid and in work. I looked for 5 years, and found this one loaded. Patients......... I may sell, but you won't come close on 3500.00

Nachos82 · 02-09-2007, 11:21 AM

Well guys, Got a 69 LWB question for you all now. How much is this one worth? He wants $2000 or reasonable offer, but If I have learned anything so far (I am trying to) this one should be around the same as the first truck I was looking at? I say the $1200-$1500 range? The tires in the pictures have been changed out for brand new ones also.

1971LT1SWBPOSI373 · 02-09-2007, 11:52 AM

See the rust rot on that right kick panel? Take a closer look. Overall, this one appears to be in much better shape than the SWB. Maybe not a bad candidate but you need to look closely at the door bottoms, rockers, bed floor etc. Automatic trans (+), also air conditioning (+). Take a close look at that upper drip rail for rust. Looks like a low milage engine (+). Has deluxe dash, no tach (+) Black interior panels and seat, dash pad look like they are in a repairable state (+) No more than 1200.00

Nachos82 · 02-09-2007, 01:48 PM

Thanks again. I am happy for all the replies and fast also. With all of the help I soon should be able to look for the specific areas everyone tells me for rust. I actually looked at that picture and didn’t notice the rust until you said about it. I guess experience with these trucks is what I am lacking. Thanks again for the help.

1971LT1SWBPOSI373 · 02-09-2007, 01:49 PM

See the rust rot on that right kick panel? Take a closer look. Overall, this one appears to be in much better shape than the SWB. Maybe not a bad candidate but you need to look closely at the door bottoms, rockers, bed floor etc. Automatic trans (+), also air conditioning (+). Take a close look at that upper drip rail for rust. Looks like a low milage engine (+). Has deluxe dash, no tach (+) Black interior panels and seat, dash pad look like they are in a repairable state (+) No more than 1200.00

**Already Gone** · 02-09-2007, 02:05 PM

I just did a little searching on the "Trucks For Sale " section on this board and at the bottom of page 3 on the 67-72 Trucks For Sale pageboard member CST 69 has a black 69 pretty decent looking 4x2 Shortbox and he is asking 3971. and says he is firm , but maybe he'll take 3500. and you would be lot better off with his truck than the one you were initially looking at for 3500.. The only glitch is he is in North Carlolina , so you'd have to it shipped ( which is probably too expensive ) or fly to N.C and drive her home and you'd be enjoying your truck right off the getgo!!!

babyblue69 · 02-09-2007, 03:35 PM

Sorry to bust any bubbles ou there, but I paid $1100 for my '69. It only has surface rust on the rocker panels. Period. It is in great shape otherwise. I bought it from the original about 3 yrs. ago. But then some say I got a deal of a lifetime! Who knows!

Nachos82 · 02-17-2007, 02:34 PM

I cant stop myself from wanting one of these babies. I found a 71 LWB automatic, not the manual SWB I want, but this one looks better then the other two and I can always make it a short bed. What are the opinons on this one. He is asking $2800. There is damage on the driver side front fender and on the grill and bumper

PanelDeland · 02-17-2007, 03:57 PM

Nacho.Just as a suggestion you may want to read some of the FAQ's.There are a lot of posts there on fixing different things that are pretty common.That will help you develop a better understanding of where to look for rust and other problems.When you go to look at a truck try taking a magnet(one of the ones like a bussiness card),it will help you determine if there is rust hiding under the paint.

Nachos82 · 02-17-2007, 04:29 PM

Thanks for the magnet trick idea. I will use that one.

Tycoon4u · 02-17-2007, 04:32 PM

I still see rust on the bottom of the kick panel on this one too. Be sure and go under it and check the cab supports and bed cross sills.

Nachos82 · 02-17-2007, 04:40 PM

This is great info, you guys really have an eye for the problem spots on these trucks. The guy said this truck is almost 100% rust free, he must have over looked that area. I need to get with the program and learn all the tricks you fellas know.

northerngmc · 02-17-2007, 11:30 PM

Texas is full of trucks! I guess I should hook on the trailer and start driving south.

Take a look...

http://dallas.craigslist.org/car/278844975.html

http://dallas.craigslist.org/car/263784822.html

http://dallas.craigslist.org/car/277499380.html

http://dallas.craigslist.org/car/276952327.html

Here's one I would look at... 1972 C-10 Chevrolet Short Bed - $7000
http://dallas.craigslist.org/car/279892463.html

http://houston.craigslist.org/car/277274258.html

Look around, there are lots of trucks...

57T210 · 02-18-2007, 10:04 AM

Quote:

Originally Posted by Longhorn Man

I would walk away. IMO, that's a $1200 truck. You can't throw a dead cat without hitting a 67 - 72 truck in Tx.
looking at that, I'm willing to bet there's a gallon of filler hidden under that paint.

Good advice. Way too much wrong with that truck for the money asked.

02-08-2007, 08:15 AM	#26
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: New and need advice on a 71 SWB Thanks for all the information fellas. I will be going on what you guys most all agree, this one is over priced for its condition. 72lb4x4, I am about 5 hours west of you in San Angelo (I am stationed at the Goodfellow air base). I have been over there to DFW though, to pick up my car I had shipped to Dallas. If you would not mind checking in on that truck I would greatly appreciate it. Like everyone has said, I have seen a lot of these trucks down here in Texas since I got here, this is actually the first one I have checked on. I was looking for an old car, but got burned out on finding tons of them that the owners would not sell. So, I decided to go to my favorite bodied truck ever and try my luck. Thanks for all the help though. Is there a general figure this truck is worth paying? I want to try and get some insight to how I can tell if a truck I find will be worth it or not. How much less are the longbeds costing also. Like I said, I don’t care if it is long or short bed, I love the bodies. I do not really like the stepsides though. If you can use this truck and its condition to tell me what a longbed would bring that would be great.

02-08-2007, 08:16 AM	#27
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Re: New and need advice on a 71 SWB Gotta agree with Andy on this one. There's gotta be at least a half gallon of bondo on that body. Looks just like mine! He He HE!

02-08-2007, 08:41 AM	#28
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: New and need advice on a 71 SWB When you life that carpet...there will be even more work you will see...I bet the floor is rusted out a bit...that rust along the weather stripping...also goes inward at lears the same amount...and maybe even more. Lots of work...abut I would snatch it for no more than 1500 cause it is a SWB. Tim __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004) Last edited by timcos; 02-08-2007 at 08:42 AM.

02-08-2007, 12:53 PM	#29
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	Re: New and need advice on a 71 SWB I wouldn't pay more than $1200 for it. That one looks like it's hiding alot. Patience is the key with these. I paid $900 for my '71 swb with 87k original miles. Granted, it was a low option model but had far less rust than what that one has. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

02-08-2007, 01:34 PM	#30
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: New and need advice on a 71 SWB Thanks for the info so far. By the sound of it I will keep looking around for a better one at a better price. I really don’t think the guy will part with it for less then $2800 or even more maybe. He was pretty set on the $3500 price and was really reluctant to want to sell it then. I do not mind working with a rusty project since that is what I usually get (originally from PA where most everything is rotted up). But if I can get a good start this time for a good price I will defiantly wait it out. Since I am now in the land of Texas where 40 year old frames look better then PA 10 year old ones I will wait. Thanks again fellas.

02-08-2007, 01:50 PM	#31
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: New and need advice on a 71 SWB Up here in the northeast that truck would sell to someone but I think were your at from what I've seen you probably should pass. In the end you are going to be the one that needs to be satisfied. Also you have to take into account what you want in the end. Meaning, No Rust Replaced Panels and Parts or Repaired Rust that Inevitably Always Seems to Come Back. For Example: The truck I bought has ten times the rust (I could stick my head through the bedside) only paid $610.00 off of ebay but It had a good frame and driveline and my plan from day one was to replace everything GOOD LUCK No matter what your decision. __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

02-08-2007, 02:10 PM	#32
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: New and need advice on a 71 SWB Prices vary considerably with locality because it costs a bit to transport these things. Some areas have a climate that preserves vehicles for centuries. Where I like, a plastic milk jug will rust in a month outside! Around here you could get about $3000 for that truck but I think you can do a lot better for $3500 in Texas. __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

02-08-2007, 03:19 PM	#33
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Re: New and need advice on a 71 SWB To be perfectly honest I wouldn't give more than $500.00 for a truck like that. It has pending transmission issues, rocker panels that look like a piece of swiss cheeze, and a sh!tty coat of paint hiding all the cancer, no chrome, no trim, and the interior is trashed. Keep lookin'. It looks like a typical Northern truck thats been playing hard in a salt road environment. I have a SWB (in my Avitar) and the old girl is for the most part rock solid and in work. I looked for 5 years, and found this one loaded. Patients......... I may sell, but you won't come close on 3500.00 __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

02-09-2007, 11:21 AM	#34
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Now it's a 69 LWB Well guys, Got a 69 LWB question for you all now. How much is this one worth? He wants $2000 or reasonable offer, but If I have learned anything so far (I am trying to) this one should be around the same as the first truck I was looking at? I say the $1200-$1500 range? The tires in the pictures have been changed out for brand new ones also. Attached Images Last edited by Nachos82; 02-09-2007 at 11:23 AM.

02-09-2007, 11:52 AM	#35
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Re: New and need advice on a 71 SWB See the rust rot on that right kick panel? Take a closer look. Overall, this one appears to be in much better shape than the SWB. Maybe not a bad candidate but you need to look closely at the door bottoms, rockers, bed floor etc. Automatic trans (+), also air conditioning (+). Take a close look at that upper drip rail for rust. Looks like a low milage engine (+). Has deluxe dash, no tach (+) Black interior panels and seat, dash pad look like they are in a repairable state (+) No more than 1200.00 __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

02-09-2007, 01:48 PM	#36
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: New and need advice on a 71 SWB Thanks again. I am happy for all the replies and fast also. With all of the help I soon should be able to look for the specific areas everyone tells me for rust. I actually looked at that picture and didn’t notice the rust until you said about it. I guess experience with these trucks is what I am lacking. Thanks again for the help.

02-09-2007, 01:49 PM	#37
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Re: New and need advice on a 71 SWB See the rust rot on that right kick panel? Take a closer look. Overall, this one appears to be in much better shape than the SWB. Maybe not a bad candidate but you need to look closely at the door bottoms, rockers, bed floor etc. Automatic trans (+), also air conditioning (+). Take a close look at that upper drip rail for rust. Looks like a low milage engine (+). Has deluxe dash, no tach (+) Black interior panels and seat, dash pad look like they are in a repairable state (+) No more than 1200.00 __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

02-09-2007, 02:05 PM	#38
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: New and need advice on a 71 SWB I just did a little searching on the "Trucks For Sale " section on this board and at the bottom of page 3 on the 67-72 Trucks For Sale pageboard member CST 69 has a black 69 pretty decent looking 4x2 Shortbox and he is asking 3971. and says he is firm , but maybe he'll take 3500. and you would be lot better off with his truck than the one you were initially looking at for 3500.. The only glitch is he is in North Carlolina , so you'd have to it shipped ( which is probably too expensive ) or fly to N.C and drive her home and you'd be enjoying your truck right off the getgo!!! __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

02-09-2007, 03:35 PM	#39
babyblue69 Registered User Join Date: Feb 2007 Location: Easley,SC Posts: 40	Re: New and need advice on a 71 SWB Sorry to bust any bubbles ou there, but I paid $1100 for my '69. It only has surface rust on the rocker panels. Period. It is in great shape otherwise. I bought it from the original about 3 yrs. ago. But then some say I got a deal of a lifetime! Who knows!

02-17-2007, 02:34 PM	#40
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: New and need advice on a 71 SWB I cant stop myself from wanting one of these babies. I found a 71 LWB automatic, not the manual SWB I want, but this one looks better then the other two and I can always make it a short bed. What are the opinons on this one. He is asking $2800. There is damage on the driver side front fender and on the grill and bumper Attached Images Last edited by Nachos82; 02-17-2007 at 02:39 PM.



Register or Log In To remove these advertisements.

02-17-2007, 03:57 PM	#41
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: New and need advice on a 71 SWB Nacho.Just as a suggestion you may want to read some of the FAQ's.There are a lot of posts there on fixing different things that are pretty common.That will help you develop a better understanding of where to look for rust and other problems.When you go to look at a truck try taking a magnet(one of the ones like a bussiness card),it will help you determine if there is rust hiding under the paint. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

02-17-2007, 04:29 PM	#42
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: New and need advice on a 71 SWB Thanks for the magnet trick idea. I will use that one.

02-17-2007, 04:32 PM	#43
Tycoon4u Tooloose Join Date: May 2005 Location: Jonesboro, IL Posts: 280	Re: New and need advice on a 71 SWB I still see rust on the bottom of the kick panel on this one too. Be sure and go under it and check the cab supports and bed cross sills. __________________ A legend in my own mind!!! website: http://www.persmedequip.com/ '68 c10 (current project) http://67-72chevytrucks.com/vboard/s...ht=cherry+bomb '04 silverado (better halfs) '07 wildcat 27rlwb(for sale) http://67-72chevytrucks.com/vboard/c...llinois&cat=17

02-17-2007, 04:40 PM	#44
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: New and need advice on a 71 SWB This is great info, you guys really have an eye for the problem spots on these trucks. The guy said this truck is almost 100% rust free, he must have over looked that area. I need to get with the program and learn all the tricks you fellas know.

02-17-2007, 11:30 PM	#45
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: New and need advice on a 71 SWB Texas is full of trucks! I guess I should hook on the trailer and start driving south. Take a look... http://dallas.craigslist.org/car/278844975.html http://dallas.craigslist.org/car/263784822.html http://dallas.craigslist.org/car/277499380.html http://dallas.craigslist.org/car/276952327.html Here's one I would look at... 1972 C-10 Chevrolet Short Bed - $7000 http://dallas.craigslist.org/car/279892463.html http://houston.craigslist.org/car/277274258.html Look around, there are lots of trucks... __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

Register or Log In To remove these advertisements.