SC 1984 C10 parting out* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 01-25-2010, 08:01 PM

Quote:

Originally Posted by ocbaud

i need the vent door for the passanger side and kick panel.

basically anything involving the passagner side kickpanel and the vent door.

like this:

http://i259.photobucket.com/albums/h...D/DSC00179.jpg

very interested. thanks

all the parts that are missing from this picture:
http://farm5.static.flickr.com/4029/...54b407bb_o.jpg

:-)

the cab that my dad has is an A/C cab so I don't think it has the vents in the kickpanels, but my crew cab project doesn't have A/C, so it definitely has the vents in the kick panels...let me get them out tonight and I'll post some pictures for you...thanks...

Chuck.

*Stitch* · 01-25-2010, 08:03 PM

Quote:

Originally Posted by dammitmitchell

just a quick comment

this is by far the MOST COMPLETE listing for a "parts truck" sale ive seen so far.. i wish this was avail last summer when i was doing everything...

good luck and good job

I tried to make this thread into everything I wished every other for sale thread I've looked had in it...

I appreciate the compliment...and I wish you still needed parts...

87Bob · 01-25-2010, 08:47 PM

Quote:

Originally Posted by Fat Hoe

I sent you a pm back on the radio...

about the fuel tank on the pass side...basically you want everything from the fuel system except the fuel line from the carb to the switching valve, the fuel line from the switching valve to the driver's tank, and the driver's tank...am I correct in this? if so, this weekend I'm taking all the big heavy parts off and I'll get everything you want off and post some pics for you...I asked my dad and he said that both tanks held gas and both tanks worked through the switch and the fuel gauge read both tanks...so the dual tank system worked perfect...thanks man...

Chuck.

I'm going to say yes at this time. I'll look forward to the pictures as I'll be able to better tell when I see them.

*Stitch* · 01-25-2010, 10:10 PM

no problem Bob, I'll post pics as soon as we get everything apart and cleaned up...thanks man...

Chuck.

*Stitch* · 01-25-2010, 10:37 PM

More stuff added...Check the list...

also, I'll have pictures up in a few...gotta eat some dinner first...

85burb · 01-25-2010, 11:04 PM

how much do you want for the dash ac vent trim above the glove box and the metal strips that the door pulls bolt on to. shipped to 75703

*Stitch* · 01-25-2010, 11:49 PM

Quote:

Originally Posted by 85burb

how much do you want for the dash ac vent trim above the glove box and the metal strips that the door pulls bolt on to. shipped to 75703

dash trim above the glove box $20 plus shipping...I'll throw in the metal strips for free if they're in the truck...gotta take the door panels off still...I'm assuming they are in there, doesn't look like the door panels have been off and it had straps so chances are they are in there...I'll check on a quote tomorrow...and I'll have pics of the stuff I pulled tonight up on here in a minute once I resize them...thanks...

Chuck.

85burb · 01-25-2010, 11:52 PM

i ment the matching trim on the doors you can see them in the pics. sorry.

*Stitch* · 01-26-2010, 12:16 AM

Quote:

Originally Posted by 85burb

i ment the matching trim on the doors you can see them in the pics. sorry.

it's cool...I just misunderstood...those are $20 for the set of both plus shipping...like I said I haven't gotten the door panels off, so I haven't gotten those strips off and cleaned up and taken pics of them...

Chuck.

*Stitch* · 01-26-2010, 12:20 AM

Pic 1 - AM/FM tape deck front
Pic 2 - GM sticker on side of tape deck
Pic 3 - A/C heater control missing fan speed knob
Pic 4 - 3 speed Shift indicator
Pic 5 - A/C ducts...defroster vents and heater box still in truck...will take pics when removed...

*Stitch* · 01-26-2010, 12:27 AM

Pic 1 - switches starting from left. Red lighted toggle switch $2, Brake light switch $2, Cruise control brake switch $2, Headlight switch w/knob.

Pic 2 - silver Glove box $5, column plastic piece $5, silver under column metal piece $5, 1984 Owner's manual $15 great shape

Pic 3 - 1984 Owner's manual great shape

Pic 4 - inside of glove box...silver paint and good latch...hinge broken and hole cut in box...can seperate latch if need be...

Pic 5 - A/C dash trim w/ silverado emblem...all studs still intact

*Stitch* · 01-26-2010, 12:30 AM

Pic 1 - Silverado emblem on A/C dash trim
Pic 2 - Factory dash speakers and mounts...$5 set
Pic 3 - silver ashtray w/ lighter...$5
Pic 4 - sunvisors
Pic 5 - B pillar trim

joe231 · 01-26-2010, 12:31 AM

what is spf?

Quote:

Headliner trim...$5 each piece...B pillars spf

what was in the glovebox? Trailer brake or cb?

*Stitch* · 01-26-2010, 12:34 AM

Pic 1 - small crack on bottom hole of driver's B pillar trim
Pic 2 - headliner trim
Pic 3 - crack on bottom of passenger's A pillar trim
Pic 4 - wiper arms
Pic 5 - Gauge cluster w/clock and voltmeter...clear plastic lens and black metal surround over gauges not included

*Stitch* · 01-26-2010, 12:35 AM

Quote:

Originally Posted by joe231

what is spf?

sold pending funds...

I know you can't send payment until I give you a shipping quote, but at least this way it's shows that it's saved for ya...I got pictures up of them too...

and the ashtray was stock nothing modified that I could tell...it did have a cb screwed to the roof at one time though...the bracket was still there...it's in the bed now...lol

*Stitch* · 01-26-2010, 12:37 AM

Back of gauge cluster

joe231 · 01-26-2010, 12:38 AM

Oh, ok
now I know lol

*Stitch* · 01-26-2010, 12:42 AM

Quote:

Originally Posted by joe231

Oh, ok
now I know lol

sorry, I misread what you wrote...I'm tired lol...too much work and too much pic editing...lol...anyways, I don't know what exactly was in the glovebox, but there is a bracket in there for something...

Big Port Jimmy 6 · 01-26-2010, 08:24 PM

Yo Fat Hoe you ever get me any pics of the wheel well molding? Jay

*Stitch* · 01-26-2010, 08:29 PM

I still need to take them off...I'm going to take them off tonight...had to stop early and come inside and help my wife with the baby...I'll definitely get them off tonight so you can see...

Chuck.

Big Port Jimmy 6 · 01-26-2010, 08:37 PM

Not a prob the baby is more important than any of this truck stuff.

*Stitch* · 01-26-2010, 08:59 PM

went out and pulled them off real quick...here's the pics...

Pic 1 - all four...pretty good shape...
Pic 2 - this is the hole, nick whatever you want to call it that I was telling you about...there are two holes there, one is the screw hole...I think this one can be bent back into shape and look pretty good when finished...
Pic 3 - paint scuff with a teeny tiny impression...
Pic 4 - another teeny tine impression...

the paint mark and the impressions, I normally wouldn't even look at, but I want to be as honest as I can about these...also, I just pulled these off the truck...they haven't been cleaned, I also planned on polishing them a little...let me know what you think...

Chuck

**old Rusty C10** · 01-26-2010, 09:26 PM

you mentioned on the door panels you had the sliver inserts on them you would sell seperately? Im interested in them..

I would have to see about getting it delivered but if i was able to and I wanted the cab ( CASH COMES FIRST so if someone has cash grab it) how is it underneath with the floors and the supports. Were the rockers replaced and corners? were the inners replaced too ?

*Stitch* · 01-26-2010, 10:09 PM

Quote:

Originally Posted by old Rusty C10

you mentioned on the door panels you had the sliver inserts on them you would sell seperately? Im interested in them..

I would have to see about getting it delivered but if i was able to and I wanted the cab ( CASH COMES FIRST so if someone has cash grab it) how is it underneath with the floors and the supports. Were the rockers replaced and corners? were the inners replaced too ?

I will sell the inserts seperately...85burb has first dibs on them...$20 plus shipping...if he doesn't decide whether he wants them or not by Thursday night when I get home from work, then they are yours...let me get the door panels off and apart and I'll post pictures of everything...I'm hopefully going to get those off tonight...

the cab looks to be rust free...my dad hasn't done anything body work wise to the truck since he bought it...so if it has replacement panels/parts in it, we don't know about it...I haven't pulled the carpet out of it yet...the seat is coming out this weekend and when it does, I'll pull the carpet out and take some pics of the bare floor boards...also, I'll take some pics of under the cab and the cab supports while we have it on the lift taking the gas tanks and motor and trans out of it...

Chuck.

Big Port Jimmy 6 · 01-26-2010, 10:44 PM

I think I am gonna pass on the moldings. Send me a total on the belts my zip is 29620. thanks Jay

01-25-2010, 10:10 PM	#29
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* no problem Bob, I'll post pics as soon as we get everything apart and cleaned up...thanks man... Chuck.

01-25-2010, 10:37 PM	#30
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* More stuff added...Check the list... also, I'll have pictures up in a few...gotta eat some dinner first...

01-25-2010, 11:04 PM	#31
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 1984 C10 parting out* how much do you want for the dash ac vent trim above the glove box and the metal strips that the door pulls bolt on to. shipped to 75703 __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-25-2010, 11:52 PM	#33
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 1984 C10 parting out* i ment the matching trim on the doors you can see them in the pics. sorry. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-26-2010, 12:20 AM	#35
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - AM/FM tape deck front Pic 2 - GM sticker on side of tape deck Pic 3 - A/C heater control missing fan speed knob Pic 4 - 3 speed Shift indicator Pic 5 - A/C ducts...defroster vents and heater box still in truck...will take pics when removed... Attached Images Last edited by Stitch; 01-26-2010 at 12:20 AM.

01-26-2010, 12:27 AM	#36
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - switches starting from left. Red lighted toggle switch $2, Brake light switch $2, Cruise control brake switch $2, Headlight switch w/knob. Pic 2 - silver Glove box $5, column plastic piece $5, silver under column metal piece $5, 1984 Owner's manual $15 great shape Pic 3 - 1984 Owner's manual great shape Pic 4 - inside of glove box...silver paint and good latch...hinge broken and hole cut in box...can seperate latch if need be... Pic 5 - A/C dash trim w/ silverado emblem...all studs still intact Attached Images Last edited by Stitch; 01-26-2010 at 12:30 AM.

01-26-2010, 12:30 AM	#37
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - Silverado emblem on A/C dash trim Pic 2 - Factory dash speakers and mounts...$5 set Pic 3 - silver ashtray w/ lighter...$5 Pic 4 - sunvisors Pic 5 - B pillar trim Attached Images Last edited by Stitch; 02-03-2010 at 08:33 PM.

01-26-2010, 12:34 AM	#39
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Pic 1 - small crack on bottom hole of driver's B pillar trim Pic 2 - headliner trim Pic 3 - crack on bottom of passenger's A pillar trim Pic 4 - wiper arms Pic 5 - Gauge cluster w/clock and voltmeter...clear plastic lens and black metal surround over gauges not included Attached Images

01-26-2010, 12:37 AM	#41
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* Back of gauge cluster Attached Images

01-26-2010, 12:38 AM	#42
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 C10 parting out* Oh, ok now I know lol __________________ *CHEVY ONLY*

01-26-2010, 08:24 PM	#44
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: 1984 C10 parting out* Yo Fat Hoe you ever get me any pics of the wheel well molding? Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

01-26-2010, 08:29 PM	#45
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* I still need to take them off...I'm going to take them off tonight...had to stop early and come inside and help my wife with the baby...I'll definitely get them off tonight so you can see... Chuck.

01-26-2010, 08:37 PM	#46
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: 1984 C10 parting out* Not a prob the baby is more important than any of this truck stuff. __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

01-26-2010, 08:59 PM	#47
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: 1984 C10 parting out* went out and pulled them off real quick...here's the pics... Pic 1 - all four...pretty good shape... Pic 2 - this is the hole, nick whatever you want to call it that I was telling you about...there are two holes there, one is the screw hole...I think this one can be bent back into shape and look pretty good when finished... Pic 3 - paint scuff with a teeny tiny impression... Pic 4 - another teeny tine impression... the paint mark and the impressions, I normally wouldn't even look at, but I want to be as honest as I can about these...also, I just pulled these off the truck...they haven't been cleaned, I also planned on polishing them a little...let me know what you think... Chuck Attached Images Last edited by Stitch; 01-26-2010 at 09:00 PM.

01-26-2010, 09:26 PM	#48
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,307	Re: 1984 C10 parting out* you mentioned on the door panels you had the sliver inserts on them you would sell seperately? Im interested in them.. I would have to see about getting it delivered but if i was able to and I wanted the cab ( CASH COMES FIRST so if someone has cash grab it) how is it underneath with the floors and the supports. Were the rockers replaced and corners? were the inners replaced too ? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

01-26-2010, 10:44 PM	#50
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: 1984 C10 parting out* I think I am gonna pass on the moldings. Send me a total on the belts my zip is 29620. thanks Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

Register or Log In To remove these advertisements.