MO 70 lwb parting out this week.. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68az_pickup · 05-27-2013, 03:59 PM

How much for the tail light harness? assuming it hasn't been hacked up

**specialtyretail** · 05-27-2013, 04:49 PM

Quote:

Originally Posted by 68az_pickup

How much for the tail light harness? assuming it hasn't been hacked up

Do you mean the one fron the firewall to the rear. I have it intact, appears to be in good condition. Kind of like the four flat trailer wire with a round plug on each end?

68az_pickup · 05-27-2013, 05:12 PM

Quote:

Originally Posted by specialtyretail

Do you mean the one fron the firewall to the rear. I have it intact, appears to be in good condition. Kind of like the four flat trailer wire with a round plug on each end?

No I need the harness that plugs into that at the rear. The one that attaches directly to the tail lights
Posted via Mobile Device

**specialtyretail** · 05-27-2013, 07:27 PM

Quote:

Originally Posted by 68az_pickup

No I need the harness that plugs into that at the rear. The one that attaches directly to the tail lights
Posted via Mobile Device

I will check on it for you. Thanks, Fred.

**too much stuff** · 05-27-2013, 08:24 PM

Thanks for checking the center caps, but i will hold off for now.
Eric

dylan1970 · 05-27-2013, 09:16 PM

So.... not interested in selling the box?

Cripton · 05-27-2013, 09:23 PM

so then is the passenger door and passenger front fender to big and heavy for you to ship?

**specialtyretail** · 05-27-2013, 10:24 PM

Quote:

Originally Posted by dylan1970

So.... not interested in selling the box?

Sure, it is for sale. If you want to arrange shipping, because I don't think UPS or FedEx would ship it even if we used them.

Quote:

Originally Posted by Cripton

so then is the passenger door and passenger front fender to big and heavy for you to ship?

Just don't ship big panels. It is a long story, but there is a reason. Sorry, that is just the way we do things at our shop.

dylan1970 · 05-27-2013, 10:41 PM

Well, I may be able to come pick it up. I really only need the box sides. I have to wait till I get back to Ontario and see if there is a vehicle I can use to make the trip. How much are you selling the bed for?

**specialtyretail** · 05-27-2013, 10:54 PM

Quote:

Originally Posted by dylan1970

Well, I may be able to come pick it up. I really only need the box sides. I have to wait till I get back to Ontario and see if there is a vehicle I can use to make the trip. How much are you selling the bed for?

The bed is $200.00. If it matters, we are 100 miles south of St Louis Missouri. Might be a pretty long trip for you. Thanks, Fred.

dylan1970 · 05-27-2013, 11:07 PM

I'll save this thread and get back to it once I figure some options out. I would really like to start working on my truck again (it's been almost 10 years) I'll be back home in a few days from now and hopefully I can figure it out by next week.

Hard_Rain420 · 05-28-2013, 09:45 AM

Hey Fred, I'll take the washer jug as well. Just as I remembered mine's brittle. Do you want payment through PayPal?

Thanks, Rich

Hard_Rain420 · 05-28-2013, 09:47 AM

great deal on the bed Fred, I would have taken that as well if I were closer.....

**specialtyretail** · 05-28-2013, 12:24 PM

Quote:

Originally Posted by Hard_Rain420

Hey Fred, I'll take the washer jug as well. Just as I remembered mine's brittle. Do you want payment through PayPal?

Thanks, Rich

Quote:

Originally Posted by Hard_Rain420

great deal on the bed Fred, I would have taken that as well if I were closer.....

Hey Rich. I am at my real job today. I will fire you off a paypal invoice when I get home. Yes, hope I priced the bed to sell, I just do not need it sitting around the shop. Thanks, Fred.

**specialtyretail** · 05-28-2013, 07:48 PM

Quote:

Originally Posted by Vintage Windmills

bench seat foam if original and not damged more than 3/8'' deep in any scraped spots
Posted via Mobile Device

Seat is in pretty nasty shape under the cover. Thanks, Fred.

Vintage Windmills · 05-28-2013, 08:31 PM

ok, thanks for checking

68az_pickup · 05-28-2013, 09:06 PM

Hey Fred, did you get a chance to check on the tail lamp harness?
Thanks, Phil
Posted via Mobile Device

**specialtyretail** · 05-28-2013, 10:27 PM

Quote:

Originally Posted by 68az_pickup

Hey Fred, did you get a chance to check on the tail lamp harness?
Thanks, Phil
Posted via Mobile Device

Hey Phil. I did, sorry I did not get back with you. All that is there is the wiring back to the rear. I have a GMC swb fleetside and I will check it for you Wednesday afternoon. Thanks, Fred.

**specialtyretail** · 05-28-2013, 11:47 PM

Quote:

Originally Posted by bluek5

I'll take the rings. Send me some payment information.
Paul

Trim rings SOLD..... Thanks, Fred.

**specialtyretail** · 05-29-2013, 09:26 AM

Ignition switch, door locks and washer jug SOLD pending payment. Thanks, Fred.

Gus350 · 05-29-2013, 10:48 AM

You have any swb beds

Thanks Kevin

**specialtyretail** · 05-29-2013, 11:17 AM

Quote:

Originally Posted by Gus350

You have any swb beds

Thanks Kevin

Hey Kevin. I have one I was kind of keeping back to do a stepside swap, just have not decided. It is better than most, not as good as others. I can get you some pics this evening if you are interested. I would have to have $500.00 for it. We are just up Interstate 55 from you. Mile marker 105. The bed is already unbolted. Ready to sit off. Thanks, Fred.

Gus350 · 05-29-2013, 02:48 PM

Quote:

Originally Posted by specialtyretail

Hey Kevin. I have one I was kind of keeping back to do a stepside swap, just have not decided. It is better than most, not as good as others. I can get you some pics this evening if you are interested. I would have to have $500.00 for it. We are just up Interstate 55 from you. Mile marker 105. The bed is already unbolted. Ready to sit off. Thanks, Fred.

Thanks but was looking for a fleetside. My shop is at advance so I'm real close to you guys

Kevin

**specialtyretail** · 05-29-2013, 05:04 PM

Quote:

Originally Posted by Gus350

Thanks but was looking for a fleetside. My shop is at advance so I'm real close to you guys

Kevin

It is a fleetside. We were thinking about taking the stepside bed off the 71 we bought and putting this fleetside on it instead, just have not decided. Thanks, Fred.

**specialtyretail** · 05-29-2013, 10:49 PM

Quote:

Originally Posted by Hard_Rain420

Hey Fred, I'll take the washer jug as well. Just as I remembered mine's brittle. Do you want payment through PayPal?

Thanks, Rich

Hey Rich. The parts are going out Thursday morning. Thanks, Fred.

05-27-2013, 03:59 PM	#26
68az_pickup Registered User Join Date: Jan 2013 Location: Chandler, AZ Posts: 4	Re: 70 lwb parting out this week.. How much for the tail light harness? assuming it hasn't been hacked up

05-27-2013, 08:24 PM	#30
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Re: 70 lwb parting out this week.. Thanks for checking the center caps, but i will hold off for now. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-27-2013, 09:16 PM	#31
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	Re: 70 lwb parting out this week.. So.... not interested in selling the box?

05-27-2013, 09:23 PM	#32
Cripton Registered User Join Date: Sep 2011 Location: Joshua Tree, California Posts: 4	Re: 70 lwb parting out this week.. so then is the passenger door and passenger front fender to big and heavy for you to ship?

05-27-2013, 10:41 PM	#34
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	Re: 70 lwb parting out this week.. Well, I may be able to come pick it up. I really only need the box sides. I have to wait till I get back to Ontario and see if there is a vehicle I can use to make the trip. How much are you selling the bed for?

05-27-2013, 11:07 PM	#36
dylan1970 Registered User Join Date: Oct 2004 Location: Owen Sound, Ont. Canada Posts: 79	Re: 70 lwb parting out this week.. I'll save this thread and get back to it once I figure some options out. I would really like to start working on my truck again (it's been almost 10 years) I'll be back home in a few days from now and hopefully I can figure it out by next week.

05-28-2013, 09:45 AM	#37
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 70 lwb parting out this week.. Hey Fred, I'll take the washer jug as well. Just as I remembered mine's brittle. Do you want payment through PayPal? Thanks, Rich

05-28-2013, 09:47 AM	#38
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 70 lwb parting out this week.. great deal on the bed Fred, I would have taken that as well if I were closer.....

05-28-2013, 08:31 PM	#41
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 70 lwb parting out this week.. ok, thanks for checking __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-28-2013, 09:06 PM	#42
68az_pickup Registered User Join Date: Jan 2013 Location: Chandler, AZ Posts: 4	Re: 70 lwb parting out this week.. Hey Fred, did you get a chance to check on the tail lamp harness? Thanks, Phil Posted via Mobile Device

05-29-2013, 09:26 AM	#45
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: 70 lwb parting out this week.. Ignition switch, door locks and washer jug SOLD pending payment. Thanks, Fred.

05-29-2013, 10:48 AM	#46
Gus350 68 C 10 Join Date: Aug 2010 Location: Advance ,Mo Posts: 554	Re: 70 lwb parting out this week.. You have any swb beds Thanks Kevin __________________ Kevin "Life is Hard But its Harder when your Stupid" John Wayne 68 C10 70 C20 http://67-72chevytrucks.com/vboard/s....php?t=602326#



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.