NY 1966 4x4 suburban - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

j.kirn · 05-11-2010, 07:19 PM

no problem will definetly take them and also the extension pieces for front brake hoses on front axle that go into the wheel cylinder. i suppose you take money orders and if so ill need your name addresss when you find out on the shipping thank you

bigrigpardo · 05-11-2010, 07:32 PM

ok i need to see bout the brake ppieces they wont be much, and i will try to check shipping tommorow.

**nbrfd007** · 05-11-2010, 10:01 PM

I would like to have the windshield stainless trim and the side stainless trim.
Thanks,
Tim

**nbrfd007** · 05-11-2010, 10:10 PM

Does it has the both Custom emblems by the doors? If you do, I would like them also and the both V6 motor emblems. Is that rust on the grill?
Thanks,
Tim

**ScottH** · 05-11-2010, 10:17 PM

Looking for a low beam T3 headlight

thanks

Joemomma1 · 05-11-2010, 11:45 PM

Quote:

Originally Posted by bigrigpardo

my mistake. 40 sounds good. and for the shaft how bout 50 and i can combine the shipping. the back bumper is bent and dented and needs chrome prob not worth the ride to cali

Sounds good. Can you please give me the measurement of the drive shaft and the shipping price to 93705. Do you do paypal?

Thanks.

bigrigpardo · 05-12-2010, 03:28 PM

yes will try to have it for u tommorow

bigrigpardo · 05-12-2010, 03:42 PM

Quote:

Originally Posted by nbrfd007

I would like to have the windshield stainless trim and the side stainless trim.
Thanks,
Tim

cool the side trim is in excelent condition and just needs a polish. the winshield trim is good with only a pencil point size ding on the passenger top. hows 150 for the trim plus shipping

bigrigpardo · 05-12-2010, 03:43 PM

Quote:

Originally Posted by nbrfd007

Does it has the both Custom emblems by the doors? If you do, I would like them also and the both V6 motor emblems. Is that rust on the grill?
Thanks,
Tim

have all 4 emblems for you. hows 50 and i can ship with the trim?

bigrigpardo · 05-12-2010, 03:44 PM

Quote:

Originally Posted by nbrfd007

Does it has the both Custom emblems by the doors? If you do, I would like them also and the both V6 motor emblems. Is that rust on the grill?
Thanks,
Tim

oh and yes the grill is chrome and rusty, it needs to be rechromed but is not rotted through that i can see

bigrigpardo · 05-12-2010, 03:44 PM

Quote:

Originally Posted by j.kirn

no problem will definetly take them and also the extension pieces for front brake hoses on front axle that go into the wheel cylinder. i suppose you take money orders and if so ill need your name addresss when you find out on the shipping thank you

do you mean the piece that bolts to the frame?

j.kirn · 05-12-2010, 05:36 PM

no, the brake hose on the front goes into the wheel cylinder,backing plate there should be some extension pieces that the hose goes into take some pics of front axle by the closed knuckle

**nbrfd007** · 05-12-2010, 05:54 PM

Quote:

Originally Posted by bigrigpardo

cool the side trim is in excelent condition and just needs a polish. the winshield trim is good with only a pencil point size ding on the passenger top. hows 150 for the trim plus shipping

Sounds good, I will take them all. PM me know the payment info. Ship to 72851.
Thanks,
Tim

**nbrfd007** · 05-12-2010, 05:55 PM

Quote:

Originally Posted by bigrigpardo

have all 4 emblems for you. hows 50 and i can ship with the trim?

Sounds good, I will take them all. PM me know the payment info.
Thanks,
Tim

**nbrfd007** · 05-12-2010, 05:56 PM

Quote:

Originally Posted by bigrigpardo

oh and yes the grill is chrome and rusty, it needs to be rechromed but is not rotted through that i can see

Thanks, I'll pass on the grill.
Thanks,
Tim

bigrigpardo · 05-12-2010, 08:13 PM

Quote:

Originally Posted by j.kirn

no, the brake hose on the front goes into the wheel cylinder,backing plate there should be some extension pieces that the hose goes into take some pics of front axle by the closed knuckle

ok i will take pics

bigrigpardo · 05-12-2010, 08:14 PM

Quote:

Originally Posted by nbrfd007

Sounds good, I will take them all. PM me know the payment info. Ship to 72851.
Thanks,
Tim

ok i wioll get the info and shipping to you in a day or so

Joemomma1 · 05-12-2010, 08:58 PM

Quote:

Originally Posted by bigrigpardo

ok i will take pics

While your down there...can you please take some pics of the 4x4 shifter assembly. Mine was completely missing so it will help greatly with the install.

*LILRED66* · 05-12-2010, 11:08 PM

Quote:

Originally Posted by Joemomma1

While your down there...can you please take some pics of the 4x4 shifter assembly. Mine was completely missing so it will help greatly with the install.

Here is what a factory 4x4 transfer case shifter looks like. I hope the photo helps.

bigrigpardo · 05-13-2010, 01:03 PM

Quote:

Originally Posted by Joemomma1

While your down there...can you please take some pics of the 4x4 shifter assembly. Mine was completely missing so it will help greatly with the install.

yes will enclose close up pics with the parts.

bigrigpardo · 05-13-2010, 01:04 PM

everyone i am trying to get shipping quotes today just bare with me

j.kirn · 05-13-2010, 02:21 PM

I can wait, no problem

**ScottH** · 05-14-2010, 12:47 PM

Any luck with the T3 low beam headlight?

bigrigpardo · 05-14-2010, 01:39 PM

Quote:

Originally Posted by ScottH

Any luck with the T3 low beam headlight?

uh. i dont know how to tell if its the right bulb

**ScottH** · 05-14-2010, 04:11 PM

should be one of the outside bulbs and have a T3 in the middle of it.

Thanks for checking

05-11-2010, 07:19 PM	#26
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1966 4x4 suburban no problem will definetly take them and also the extension pieces for front brake hoses on front axle that go into the wheel cylinder. i suppose you take money orders and if so ill need your name addresss when you find out on the shipping thank you

05-11-2010, 07:32 PM	#27
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: 1966 4x4 suburban ok i need to see bout the brake ppieces they wont be much, and i will try to check shipping tommorow.

05-11-2010, 10:01 PM	#28
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: 1966 4x4 suburban I would like to have the windshield stainless trim and the side stainless trim. Thanks, Tim

05-11-2010, 10:10 PM	#29
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: 1966 4x4 suburban Does it has the both Custom emblems by the doors? If you do, I would like them also and the both V6 motor emblems. Is that rust on the grill? Thanks, Tim Last edited by nbrfd007; 05-11-2010 at 10:21 PM. Reason: add grill

05-11-2010, 10:17 PM	#30
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 1966 4x4 suburban Looking for a low beam T3 headlight thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-12-2010, 03:28 PM	#32
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: 1966 4x4 suburban yes will try to have it for u tommorow

05-12-2010, 05:36 PM	#37
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1966 4x4 suburban no, the brake hose on the front goes into the wheel cylinder,backing plate there should be some extension pieces that the hose goes into take some pics of front axle by the closed knuckle

05-13-2010, 01:04 PM	#46
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: 1966 4x4 suburban everyone i am trying to get shipping quotes today just bare with me

05-13-2010, 02:21 PM	#47
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 1966 4x4 suburban I can wait, no problem

05-14-2010, 12:47 PM	#48
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 1966 4x4 suburban Any luck with the T3 low beam headlight? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-14-2010, 04:11 PM	#50
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 1966 4x4 suburban should be one of the outside bulbs and have a T3 in the middle of it. Thanks for checking __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.