IN 1961 ? GMC 4000 Parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 10-04-2012, 11:55 AM

Quote:

Originally Posted by Low61projekt

Hey. Whats the condition on the stainless of those vent windows?? Pics of those possibly.. I may be interested in the driver side as mine is rotted away. If you can do a deal on the set I may just do that. Thanks.

I can get pictures tonight. Thanks

Low61projekt · 10-04-2012, 02:08 PM

Ok great! Thanks much!

**Todd68Chevy** · 10-04-2012, 09:10 PM

Quote:

Originally Posted by Low61projekt

Ok great! Thanks much!

These are not stainless, they are painted metal and do not look like they are in good condition either. The glass is poor and there are spots that are rusty. I am not sure if they would be worth taking them out. Do you know how hard they are to get out of the door? The shipping is usually higher than normal also because of the size if the window run channel is attached like the 67-72 trucks are. If you are interested in one or both for $25.00 each plus shipping then I will get them out of the doors and try to get better pictures. Here are pictures of the left one. Let me know. Thanks

**Todd68Chevy** · 10-04-2012, 09:15 PM

First 3 pictures are of the right side one and the last 2 are of the left one. Thanks

Low61projekt · 10-04-2012, 09:54 PM

Okay. Wasnt sure what condition these were in since the other pics were farther away but im gunna have to pass on this then.. Thanks for your time and input anyway. Much appeciated.

**Todd68Chevy** · 10-04-2012, 10:50 PM

Quote:

Originally Posted by Low61projekt

Okay. Wasnt sure what condition these were in since the other pics were farther away but im gunna have to pass on this then.. Thanks for your time and input anyway. Much appeciated.

No problem, Glad you asked. Never know if you do not ask.

63_Rouss_Fire_Co_GMC · 10-07-2012, 05:23 AM

Is the driver door fixable? Mine was hit by a tree at the mirror and pushed the tip of door in and bottom at handle. I would be interested in the door if not too much. Winchester, Va, 22602. Thanks, Jeremy
Posted via Mobile Device

**Todd68Chevy** · 10-07-2012, 10:01 PM

Quote:

Originally Posted by 63_Rouss_Fire_Co_GMC

Is the driver door fixable? Mine was hit by a tree at the mirror and pushed the tip of door in and bottom at handle. I would be interested in the door if not too much. Winchester, Va, 22602. Thanks, Jeremy
Posted via Mobile Device

The door is very rusty and is rusted out along the bottom. I do not think it would even be worth the shipping cost. Sorry

rcbildr · 10-11-2012, 01:56 AM

How is the wire harness going to the coil?

**Todd68Chevy** · 10-11-2012, 06:51 AM

Quote:

Originally Posted by rcbildr

How is the wire harness going to the coil?

I can check it out tonight after work and will let you know. Thanks

**Todd68Chevy** · 10-11-2012, 09:19 PM

Quote:

Originally Posted by rcbildr

How is the wire harness going to the coil?

Are you meaning the harness that runs from the coil back into the cab? or the wire from the coil to the dist.? The wire from the coil to the inside looks good on the outside but at the connector on the inside of the cab 2 of the wires have been wired around the connector.

rcbildr · 10-11-2012, 10:12 PM

Actually, the first pic helps me out with what I need to know. My wiring has been hacked up a little and I was hoping your truck would have a harness that was in better shape. Thanks for taking the pics.

**Todd68Chevy** · 10-12-2012, 05:20 PM

Quote:

Originally Posted by rcbildr

Actually, the first pic helps me out with what I need to know. My wiring has been hacked up a little and I was hoping your truck would have a harness that was in better shape. Thanks for taking the pics.

If you want more pictures to help fix yours just let me know. Thanks for asking.

rcbildr · 10-22-2012, 09:57 PM

Are you parting out the engine? If so what size is it. I need a push rod for the 305 V6 in my 60 GMC. Thanks!

**Todd68Chevy** · 10-23-2012, 09:13 PM

Quote:

Originally Posted by rcbildr

Are you parting out the engine? If so what size is it. I need a push rod for the 305 V6 in my 60 GMC. Thanks!

I am keeping the engine as a display engine so I might be able to sell the internal part but never really thought about it. I will not sell any visable/ external items. How can I tell what size it is?

**chevy_man5** · 10-24-2012, 08:18 AM

Right in front of the right head, should be a small flat area that should have the engine number on it. If it is the original engine, I think it will probably be the 305A.

This is from the 6066 GMC site.

McCoyAZ · 11-06-2012, 09:58 PM

If the hood latching PIN is longer than 2.5 inches and looks like this one then what would it cost along with shipping to 86409 pleae?

Thanks in advance

**Todd68Chevy** · 11-06-2012, 10:38 PM

Quote:

Originally Posted by McCoyAZ

If the hood latching PIN is longer than 2.5 inches and looks like this one then what would it cost along with shipping to 86409 pleae?

Thanks in advance

Do you only want the pin? Here is the one out of this truck. Total length is 3 5/8" or from the head down it is 2 5/8" The pin does have some pitting. If it will work, $7.50 shipping USPS First Class Mail. Thanks

**Todd68Chevy** · 11-06-2012, 10:41 PM

Quote:

Originally Posted by McCoyAZ

If the hood latching PIN is longer than 2.5 inches and looks like this one then what would it cost along with shipping to 86409 pleae?

Thanks in advance

I can get pictures of the bracket that the pin goes into if you want. Maybe the bracket is bent different. Let me know. Thanks

**Todd68Chevy** · 11-06-2012, 10:43 PM

Quote:

Originally Posted by rcbildr

Are you parting out the engine? If so what size is it. I need a push rod for the 305 V6 in my 60 GMC. Thanks!

Quote:

Originally Posted by chevy_man5

Right in front of the right head, should be a small flat area that should have the engine number on it. If it is the original engine, I think it will probably be the 305A.

This is from the 6066 GMC site.

I am sorry, I forgot to get back to you on this. It says 305C. Is that the correct one for what you need?

rcbildr · 11-07-2012, 05:24 AM

Quote:

Originally Posted by Todd68Chevy

I am sorry, I forgot to get back to you on this. It says 305C. Is that the correct one for what you need?

It's ok, I totally forgot about this too...stumbled by looking for mirrors. Anyways, let me double check my engine, I'm pretty sure it's a 305.

rcbildr · 11-07-2012, 05:29 AM

Are the heater controls available?

McCoyAZ · 11-07-2012, 07:30 AM

Quote:

Originally Posted by Todd68Chevy

Do you only want the pin? Here is the one out of this truck. Total length is 3 5/8" or from the head down it is 2 5/8" The pin does have some pitting. If it will work, $7.50 shipping USPS First Class Mail. Thanks

I just need the pin I will take it. Thanks

PM sent.

**Todd68Chevy** · 11-07-2012, 07:50 AM

Quote:

Originally Posted by rcbildr

It's ok, I totally forgot about this too...stumbled by looking for mirrors. Anyways, let me double check my engine, I'm pretty sure it's a 305.

Let me know and we can go from there.

Quote:

Originally Posted by rcbildr

Are the heater controls available?

They are still in the truck and I am not sure how good they are so let me get it removed and inspected. I have a meeting tonight so it will probably be tomorrow night before I can. Thanks

Quote:

Originally Posted by McCoyAZ

I just need the pin I will take it. Thanks

PM sent.

I was meaning $7.50 for the pin including the shipping. I will PM my payment information. Thanks

McCoyAZ · 11-07-2012, 11:52 AM

Money sent via PayPal

thanks

10-04-2012, 02:08 PM	#27
Low61projekt Registered User Join Date: Apr 2012 Location: Piscataway, NJ Posts: 19	Re: 1961 ? GMC 4000 Parts Ok great! Thanks much!

10-04-2012, 09:15 PM	#29
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1961 ? GMC 4000 Parts First 3 pictures are of the right side one and the last 2 are of the left one. Thanks Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

10-04-2012, 09:54 PM	#30
Low61projekt Registered User Join Date: Apr 2012 Location: Piscataway, NJ Posts: 19	Re: 1961 ? GMC 4000 Parts Okay. Wasnt sure what condition these were in since the other pics were farther away but im gunna have to pass on this then.. Thanks for your time and input anyway. Much appeciated.

10-07-2012, 05:23 AM	#32
63_Rouss_Fire_Co_GMC Registered User Join Date: Aug 2012 Location: Winchester, Va Posts: 72	Re: 1961 ? GMC 4000 Parts Is the driver door fixable? Mine was hit by a tree at the mirror and pushed the tip of door in and bottom at handle. I would be interested in the door if not too much. Winchester, Va, 22602. Thanks, Jeremy Posted via Mobile Device

10-11-2012, 01:56 AM	#34
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: 1961 ? GMC 4000 Parts How is the wire harness going to the coil? __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

10-11-2012, 10:12 PM	#37
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: 1961 ? GMC 4000 Parts Actually, the first pic helps me out with what I need to know. My wiring has been hacked up a little and I was hoping your truck would have a harness that was in better shape. Thanks for taking the pics. __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

10-22-2012, 09:57 PM	#39
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: 1961 ? GMC 4000 Parts Are you parting out the engine? If so what size is it. I need a push rod for the 305 V6 in my 60 GMC. Thanks! __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

10-24-2012, 08:18 AM	#41
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 1961 ? GMC 4000 Parts Right in front of the right head, should be a small flat area that should have the engine number on it. If it is the original engine, I think it will probably be the 305A. This is from the 6066 GMC site. Attached Images __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-06-2012, 09:58 PM	#42
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: 1961 ? GMC 4000 Parts If the hood latching PIN is longer than 2.5 inches and looks like this one then what would it cost along with shipping to 86409 pleae? Thanks in advance Attached Images __________________ http://s994.photobucket.com/albums/af62/ScottAz2/

11-07-2012, 05:29 AM	#47
rcbildr Registered User Join Date: Sep 2000 Location: Gold Bar, WA Posts: 1,216	Re: 1961 ? GMC 4000 Parts Are the heater controls available? __________________ My Projects: 1960 GMC 1/2ton with 305 V6 (daily driver) 1963 Chevy 1/2ton 2wd...converting to 4x4 1967 Suburban 1/2ton 2wd My Girlfriends Projects 1985 Chevy Suburban 3/4ton 4x4 with 6.2L diesel, 4" lift, converted to TH-400, Warn Premium manual hubs, & Wildcat 315/75/R16 tires. (daily driver) 1978 Camaro Type LT with a Marine 350 & vortec heads, Rochester Carb, & roller cam 1978 Camaro Z28

11-07-2012, 11:52 AM	#50
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: 1961 ? GMC 4000 Parts Money sent via PayPal thanks __________________ http://s994.photobucket.com/albums/af62/ScottAz2/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.