cup holder

[LNP]

Once the face plate adapter is done it will look like the ash tray is still there when closed.

[kwmech]

Seriously--- It's that easy?

[Rust_never_sleeps]

Could start by printing sum'n like this:

https://www.thingiverse.com/thing:4250466

[LNP]

Originally Posted by Rust_never_sleeps

Could start by printing sum'n like this:

https://www.thingiverse.com/thing:4250466

I'll let him know about this one and if you want one let me know so I can tell him

[Rust_never_sleeps]

Originally Posted by LNP

I'll let him know about this one and if you want one let me know so I can tell him

Looks like I missed a few posts.
I like the modded Toyota slider. I can fab(or print) one up myself, but thank you

[LNP]

Originally Posted by Rust_never_sleeps

Looks like I missed a few posts.
I like the modded Toyota slider. I can fab(or print) one up myself, but thank you

Ok I only said something because you mention it. No worries

[LNP]

Ok we got the toyota cup holder bracket done. This is it with the cup holder installed.

[chewychevy67]

So I'm curious if it will hit the ac duct hoses behind the dash because it sticks out so far from the back? I have a 67 ash tray so it may be a bit different.

[LNP]

Originally Posted by chewychevy67

So I'm curious if it will hit the ac duct hoses behind the dash because it sticks out so far from the back? I have a 67 ash tray so it may be a bit different.

I routed my ac hose over it. I have a 69 trk and ash tray

[LNP]

Originally Posted by LNP

I routed my ac hose over it. I have a 69 trk and ash tray

I also wanna add the bracket is only a 1/2" longer than the Toyota cup holder is.

[thedudeabides86]

Hey guys,

I picked up one of these from LS Fabrication in Canada. It bolts right the the base of where the hold down screws are on our AC/Defrost units mount. It may vibrate a tad, but it's never let me or my drinks down.

https://lsfab.com/67-72-gmc-chevy-c1...ck-cup-holder/

[Rust_never_sleeps]

I was astonished to find they're still making these things.
They ARE period correct, though ;-)

https://www.acehardware.com/departme...essories/89981

[chewychevy67]

So the piece that you inserted the cup holder into is 3d printed? Cool

[LNP]

Originally Posted by chewychevy67

So the piece that you inserted the cup holder into is 3d printed? Cool

Yes it is. My son made it and said if anyone is interested in one he can make them.

[Rust_never_sleeps]

Originally Posted by LNP

Yes it is. My son made it and said if anyone is interested in one he can make them.

Would he be willing to share the STL?

[LNP]

Originally Posted by Rust_never_sleeps

Would he be willing to share the STL?

STL?? I'm not sure what that is so I cant say.

[Rust_never_sleeps]

Originally Posted by LNP

STL?? I'm not sure what that is so I cant say.

sorry, STL is the CAD file the printer reads to make the part

[chewychevy67]

Could you post the measurements if that's not too much trouble. I would like to see if it will fitina 67 ashtray bracket

[LNP]

Originally Posted by chewychevy67

Could you post the measurements if that's not too much trouble. I would like to see if it will fitina 67 ashtray bracket

No worries. Heres a couple photos so you can see the measurments and where I measured from.

[Richard]

The 3D printed slider is awesome. Have been working on my cup holder as well. I do not have one of those 3D printer gizmos or the knowledge to use it. I am doing it with basic materials available. Ash tray is modded and cup holder slides in and out. The tray length is a bit of an issue with the tray slider. Have a solution, just no time yet to implement the change. Hope to provide pics of another option soon.

[LNP]

Hate me if you want but I'm not gunna ask him to give it away free as I asked him to make this for me with the possiblity he could sell one or two. The one I am installing today the one I post the final pics of is the 5th version. Started with a smaller one and ended up with the size it is as thats what worked best with this particular cup holder. Each bracket he made took 16hrs to print. He sat at home at his desk with calipers and measured figure and created a 3d model from scratch then proceeded to print them out. the two pieces that attach to the cup holder itself so the face plate adapts was his own idea and design. He doesnt care if any sell he did this to help me. He took in to account that others had said they did not want to ruin thier original ash tray and designed this one to fit without ruinin it. Thats a lot of trail error and personal time. Please dont take me wrong I am just explaining after what he went thru to make this why I dont wanna now ask him to hand the program out. Then someone else will make them to sell.

[LNP]

Ok heres the finished product installed in my truck.

https://www.youtube.com/watch?v=sKs09OV3g3I

[Rust_never_sleeps]

Originally Posted by LNP

Hate me if you want but I'm not gunna ask him to give it away free

sure, totally fair

[LNP]

Originally Posted by Rust_never_sleeps

sure, totally fair

Thanks you for understanding

[LNP]

Originally Posted by Richard

Have no idea where that came from? No hate here, said it was a good job. Never asked for a free one or even to buy one. I have no doubt he worked hard on it. I am doing it differently for reasons I stated.

I apoloize Richard;9327256 I clocked on the wrong post when I did my reply. Rust_Never_Sleeps had asked if he would share the cad file not you. Again I apologize. I tried to delete the post but cant see how. I did remove your quote from the post