Project 7deuce - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 11-24-2007, 10:22 AM

Even with all the cussing about sanding and welding the firewall it sure turned out killer... And I got my new pulleys,new oil pan,new timing chain and dipsticks on and I thought it was going back in for good but its been out a few times since.cover

**FRENCHBLUE72** · 11-24-2007, 10:31 AM

Got the bradided fuel ine installed used the made just for you clamps the are pretty sweet. I still need to pull the cab off and weld up all the holes and por 15 it... I used silver por 15 on the cab floors and black por 15 on the inside firewall too..

**FRENCHBLUE72** · 11-24-2007, 10:40 AM

Heres a couple of shots of her sitting out side and some shots of the rust that I gotta get repaired..

**FRENCHBLUE72** · 11-24-2007, 10:52 AM

More rust and some more por 15 on the inner rocker and on the inside of the outter rocker.

ChevyDude · 11-24-2007, 10:55 AM

Amen on how long it takes to shave the firewall and cap the channel. Hours of welding and grinding, the your result looks good. I still have a lot more welding and grinding, then filling and sanding to go. The look is worth the work. Good Job!

Alex

**FRENCHBLUE72** · 11-24-2007, 11:00 AM

Here you can see the outter rocker is ready to be welded on(still not welded yet) Some shots of theinside of the cab with all the holes in the floors patched and the tranny cover shifter hole welded up and smoothed. And more of the killer por 15..

mike nutt · 11-24-2007, 11:06 AM

the truck is really coming along nicely. i wish i would have shaved the channel on my firewall. keep up the good work.

**FRENCHBLUE72** · 11-24-2007, 11:09 AM

Lats of the por 15 shots that I have. One word of caution is to to this stuff in a well vented area. Now for some

stuff foe the motor... New tranny pan from summit and lokar th400 kickdown set-up ..

**FRENCHBLUE72** · 11-24-2007, 11:14 AM

A shot of the painted tranny and the summit tranny pan along with the lokar kick down set-up. My new lokar dipsticks installed... Bought all this stuff from summit when I went to hot august nights I think it was called peer pressure..

**FRENCHBLUE72** · 11-24-2007, 11:24 AM

Pic for the above post could not get them to attach for some reason maybe ive been at it too long this a.m.

seems my attachment button is broke...

**FRENCHBLUE72** · 11-24-2007, 01:09 PM

Finally the pics..

**FRENCHBLUE72** · 11-24-2007, 01:13 PM

And the last of the pics for today this will be the color I paint it....frenchblue.

cstm68 · 11-24-2007, 02:28 PM

nice looking project.

and i love your yota

**FRENCHBLUE72** · 12-24-2007, 08:35 AM

ya more progress........ vacation rocks.. I decided that I needed wider tubs to clear the wide rear tires I d like to run. So I broke out the cuttin wheel and zipped em apart and added some metal from donar tubs I had and welded em back together.

**FRENCHBLUE72** · 12-24-2007, 08:42 AM

I cut the inside of the bed to make way for the future wheel and tire combo and finally installed my new intake (from mike nutt thanks.)and new valve covers. When I tried to install the carb the fuel outlet ran into the side of the valve cover so it looks like I ll have to look at other options.

**FRENCHBLUE72** · 12-24-2007, 08:50 AM

Got my notch built and welded up. I f I had to do it agian Id just order the countoured notch as doing it this way is a pain but I thought it would be easier ya right. I have to go back in and final weld the notch and make my boxing plates and make sure everything is safe. For some reason in the pics the notch holes that I cut look huge but they are really pretty tight on the notch.

**FRENCHBLUE72** · 12-24-2007, 08:54 AM

Notch installed and readdy for braceing and finall welding. And check out how think that damn frame was to cut the sawzall sure did not want to cut through that.

**FRENCHBLUE72** · 12-24-2007, 08:58 AM

This is how shes sits right now... Gotta get back out and finish it today... See ya tonight..

Frizzle Fry · 12-24-2007, 09:21 AM

Nice work! Firewall looks awesome. You're gonna love that lokar kick-down switch.

Spray-Bomb · 12-24-2007, 07:06 PM

Cant wait to see more !!!

**FRENCHBLUE72** · 12-25-2007, 03:52 AM

Got most of the notch finished before I ran out of wire for the welder hopefully someone will be open today.. I cut the bed center out and dropped the bed back on but the tires hit the inside of the bedsides so it will need to be trimmed to fit. Also the truck arms hit the frame so I m gonna have to decide where to put my bags and since I ordered drop spindals for the front I may need to adda block in the rear. Thanks for the comments guys and frizz get those headders installed so I can order a set...

Frizzle Fry · 12-25-2007, 08:09 AM

Quote:

Originally Posted by FRENCHBLUE72

frizz get those headders installed so I can order a set...

No Need to wait on me. Jkade already had them installed without issue. Just a little frame trimage according to him. I'm shopping for mufflers now. Looking at 50 series flows...

**FRENCHBLUE72** · 12-25-2007, 02:52 PM

Damn that means I have to order those too.... Maybe I can sell the ones I have to offset the cost..

abadsvt · 12-27-2007, 07:58 AM

Hey Frenchblue72! I was just reading you signature and realized that your are planning on going to Hot August Nights this summer. I am hoping to have my truck driving by then and take it down there also. We should meet up. Anyways talk to you later

Josh

**FRENCHBLUE72** · 12-27-2007, 09:03 AM

Josh I try to go every year we usally meet up at a boardmembers house and have a bar-b-q...

11-24-2007, 10:22 AM	#26
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Even with all the cussing about sanding and welding the firewall it sure turned out killer... And I got my new pulleys,new oil pan,new timing chain and dipsticks on and I thought it was going back in for good but its been out a few times since.cover Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 10:31 AM	#27
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Got the bradided fuel ine installed used the made just for you clamps the are pretty sweet. I still need to pull the cab off and weld up all the holes and por 15 it... I used silver por 15 on the cab floors and black por 15 on the inside firewall too.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 11-24-2007 at 10:32 AM.

11-24-2007, 10:40 AM	#28
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Heres a couple of shots of her sitting out side and some shots of the rust that I gotta get repaired.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 11-24-2007 at 01:03 PM.

11-24-2007, 10:52 AM	#29
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce More rust and some more por 15 on the inner rocker and on the inside of the outter rocker. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 10:55 AM	#30
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Project 7deuce Amen on how long it takes to shave the firewall and cap the channel. Hours of welding and grinding, the your result looks good. I still have a lot more welding and grinding, then filling and sanding to go. The look is worth the work. Good Job! Alex __________________ Alex 1971 Lil' Red 350 SBC 700R4

11-24-2007, 11:00 AM	#31
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Here you can see the outter rocker is ready to be welded on(still not welded yet) Some shots of theinside of the cab with all the holes in the floors patched and the tranny cover shifter hole welded up and smoothed. And more of the killer por 15.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 11:06 AM	#32
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: Project 7deuce the truck is really coming along nicely. i wish i would have shaved the channel on my firewall. keep up the good work.

11-24-2007, 11:09 AM	#33
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Lats of the por 15 shots that I have. One word of caution is to to this stuff in a well vented area. Now for somestuff foe the motor... New tranny pan from summit and lokar th400 kickdown set-up .. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 11-24-2007 at 01:04 PM.

11-24-2007, 11:14 AM	#34
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce A shot of the painted tranny and the summit tranny pan along with the lokar kick down set-up. My new lokar dipsticks installed... Bought all this stuff from summit when I went to hot august nights I think it was called peer pressure.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 11:24 AM	#35
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Pic for the above post could not get them to attach for some reason maybe ive been at it too long this a.m.seems my attachment button is broke... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 01:09 PM	#36
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Finally the pics.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 01:13 PM	#37
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce And the last of the pics for today this will be the color I paint it....frenchblue. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 02:28 PM	#38
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: Project 7deuce nice looking project. and i love your yota __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

12-24-2007, 08:35 AM	#39
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce ya more progress........ vacation rocks.. I decided that I needed wider tubs to clear the wide rear tires I d like to run. So I broke out the cuttin wheel and zipped em apart and added some metal from donar tubs I had and welded em back together. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-24-2007, 08:42 AM	#40
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce I cut the inside of the bed to make way for the future wheel and tire combo and finally installed my new intake (from mike nutt thanks.)and new valve covers. When I tried to install the carb the fuel outlet ran into the side of the valve cover so it looks like I ll have to look at other options. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

12-24-2007, 08:50 AM	#41
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Got my notch built and welded up. I f I had to do it agian Id just order the countoured notch as doing it this way is a pain but I thought it would be easier ya right. I have to go back in and final weld the notch and make my boxing plates and make sure everything is safe. For some reason in the pics the notch holes that I cut look huge but they are really pretty tight on the notch. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-24-2007, 08:54 AM	#42
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Notch installed and readdy for braceing and finall welding. And check out how think that damn frame was to cut the sawzall sure did not want to cut through that. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 12-24-2007 at 08:55 AM.

12-24-2007, 08:58 AM	#43
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce This is how shes sits right now... Gotta get back out and finish it today... See ya tonight.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-24-2007, 09:21 AM	#44
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Project 7deuce Nice work! Firewall looks awesome. You're gonna love that lokar kick-down switch.

12-24-2007, 07:06 PM	#45
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project 7deuce Cant wait to see more !!! __________________ Just not low enough... ----------------------------- Sinister Killer

12-25-2007, 03:52 AM	#46
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Got most of the notch finished before I ran out of wire for the welder hopefully someone will be open today.. I cut the bed center out and dropped the bed back on but the tires hit the inside of the bedsides so it will need to be trimmed to fit. Also the truck arms hit the frame so I m gonna have to decide where to put my bags and since I ordered drop spindals for the front I may need to adda block in the rear. Thanks for the comments guys and frizz get those headders installed so I can order a set... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-25-2007, 02:52 PM	#48
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Damn that means I have to order those too.... Maybe I can sell the ones I have to offset the cost.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-27-2007, 07:58 AM	#49
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Project 7deuce Hey Frenchblue72! I was just reading you signature and realized that your are planning on going to Hot August Nights this summer. I am hoping to have my truck driving by then and take it down there also. We should meet up. Anyways talk to you later Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

12-27-2007, 09:03 AM	#50
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 7deuce Josh I try to go every year we usally meet up at a boardmembers house and have a bar-b-q... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.