How about some pics of bagged C-10's - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BACKYARD88 · 09-07-2007, 05:12 PM

I'm a late bloomer, here's a couple more of mine

datguysaL · 06-03-2009, 12:22 AM

[QUOTE=BACKYARD88;2347343]I'm a late bloomer, here's a couple more of mine

hey i remember this truck, way back late like in 99. back when it was originally white and the shortend rear bumper. aahhh.... memories....

crispo-71 · 06-13-2011, 06:41 PM

Quote:

Originally Posted by BACKYARD88

I'm a late bloomer, here's a couple more of mine

hey i got a truck exactly like dis one.. ma question is how long do i hav 2 cut the frame for da c notch.. u think a foot is ok???

Frizzle Fry · 09-07-2007, 05:33 PM

Still fine-tuning my levitation device...

abadsvt · 09-07-2007, 08:10 PM

Hey Frizzle that thing looks SICK!!!! I like it alot!

Here is my project but i am going to be swapping out the frame for a new one once i get it built because i am going to be using a complete c5 corvette supsension, motor and transaxle!

Josh

VDOG · 05-26-2011, 02:13 PM

Quote:

Originally Posted by abadsvt

Hey Frizzle that thing looks SICK!!!! I like it alot!

Here is my project but i am going to be swapping out the frame for a new one once i get it built because i am going to be using a complete c5 corvette supsension, motor and transaxle!

Josh

Thats on sick stance

camaro__thunder · 09-12-2007, 12:18 PM

Heres 2 more

FRENCHBLUE72 · 09-16-2007, 07:46 PM

heres mine........................

steveo10 · 09-17-2007, 12:44 PM

heres some pics of my rear set-up. just a kp notch and a suicide doors superlift 4 link.

BFRO$TY · 05-15-2009, 08:48 PM

hey nice ride, had a question. is it me or is the rear section of your frame longer than normal?

XXL · 05-15-2009, 09:36 PM

Quote:

Originally Posted by BFRO$TY

hey nice ride, had a question. is it me or is the rear section of your frame longer than normal?

Not including yours or this one, there are 531 posts in this thread. Any chance you'll tell us who you're pointing the above question to?

crispo-71 · 06-13-2011, 06:51 PM

hey i gotta question.. how tall and wide dose da c notch hav 2 be 2 lay frame???

Nobaddaze · 06-13-2011, 08:08 PM

Quote:

Originally Posted by crispo-71

hey i gotta question.. how tall and wide dose da c notch hav 2 be 2 lay frame???

Not sure if this is the right thread for this question but a quick answer would be: It depends on what tire size your planning on running, The top most part of your rearend is dependant on the radius of your tire. I say build the notch as small as necessary for strength. You need to bust out da tape measure and start making it work.

crispo-71 · 06-14-2011, 07:25 PM

yea ma bad. im new 2 dis forum thing. n i wanted 24s but busted out da measureing tape n found out it would tuch da top of ma fender on ma step side, so im goin 22s... dis is my 1st c notch 1st project actually and i want 2 do erything on it myself..

C10-Driver · 09-22-2007, 12:23 PM

Not even close to layin frame but here is a pic of mine.

Name: 2007_0909_70-C10_CarShow0021.jpg
Views: 33141
Size: 74.1 KB

This is as low as I could go without modifying the inners fenders and bed. Basically, I have a little less than an inch of clearance from the pumpkin to the lower side of the bed and from the top of the tire to the inner fenders up front.

metalman1968 · 03-03-2009, 11:09 PM

Quote:

Originally Posted by C10-Driver

Not even close to layin frame but here is a pic of mine.

Attachment 301543

This is as low as I could go without modifying the inners fenders and bed. Basically, I have a little less than an inch of clearance from the pumpkin to the lower side of the bed and from the top of the tire to the inner fenders up front.

That is one beautiful truck

thechevyman · 10-04-2009, 04:07 PM

thats a bad truck bro

C10-Driver · 09-22-2007, 02:16 PM

Quote:

Originally Posted by 70short

C10-Driver I am assuming that you have drop spindles and C-Notched rear frame?? I like the way your truck sits!

You are correct. In the front - 73-87 style front x-member swap, 2" drop spindles with the bag cups cut down to about 1". In the rear - axle flip, de-arched leaf springs, air-over leaf bags similar to N2TRUX's and a bolt-in notch that was welded in. I set my bump stops at the height set in the picture but could get well over an inch lower with the current set-up except for the box and inner fenders getting in the way.

Alvin · 11-19-2007, 07:36 PM

Here's mine. Nothing special, and also not complete

Ackattack · 11-19-2007, 08:12 PM

I think I get the most incomplete bagged C-10 award!

isdeleon · 04-30-2008, 05:54 PM

Quote:

Originally Posted by Ackattack

I think I get the most incomplete bagged C-10 award!

i'm not too sure, you got competition

dan468 · 04-30-2008, 07:08 PM

Quote:

Originally Posted by isdeleon

i'm not too sure, you got competition

which a-arms are you using on your truck?

Spray-Bomb · 11-19-2007, 08:45 PM

It's sweet, but takes a lot of time, money, & effort to get em there

Heres an update on mine
No springs in the back, but should be close to ride height for a while

bagged70 · 11-28-2007, 10:46 PM

heres minean old one

bagged70 · 11-30-2007, 06:46 PM

centerline zooms i hope to have it rolling this comming summer

09-07-2007, 05:12 PM	#1
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: post all bagged c10 here I'm a late bloomer, here's a couple more of mine __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

06-03-2009, 12:22 AM	#2
datguysaL Registered User Join Date: May 2009 Location: Houston, TX Posts: 155	Re: post all bagged c10 here [QUOTE=BACKYARD88;2347343]I'm a late bloomer, here's a couple more of mine hey i remember this truck, way back late like in 99. back when it was originally white and the shortend rear bumper. aahhh.... memories....

09-07-2007, 05:33 PM	#4
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: post all bagged c10 here Still fine-tuning my levitation device... Attached Images

09-07-2007, 08:10 PM	#5
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: post all bagged c10 here Hey Frizzle that thing looks SICK!!!! I like it alot! Here is my project but i am going to be swapping out the frame for a new one once i get it built because i am going to be using a complete c5 corvette supsension, motor and transaxle! Josh Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

09-12-2007, 12:18 PM	#7
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: post all bagged c10 here Heres 2 more Attached Images __________________ My Project 69 SWB SHAVED BAGGED DOORED

09-16-2007, 07:46 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: post all bagged c10 here heres mine........................ Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-17-2007, 12:44 PM	#9
steveo10 Registered User Join Date: Jan 2006 Location: central indiana Posts: 128	Re: post all bagged c10 here heres some pics of my rear set-up. just a kp notch and a suicide doors superlift 4 link. Attached Images

05-15-2009, 08:48 PM	#10
BFRO$TY Registered User Join Date: Aug 2008 Location: lafayette, IN Posts: 68	Re: post all bagged c10 here hey nice ride, had a question. is it me or is the rear section of your frame longer than normal?

06-13-2011, 06:51 PM	#12
crispo-71 Registered User Join Date: Jun 2011 Location: new braunfels tx Posts: 57	Re: post all bagged c10 here hey i gotta question.. how tall and wide dose da c notch hav 2 be 2 lay frame???

06-14-2011, 07:25 PM	#14
crispo-71 Registered User Join Date: Jun 2011 Location: new braunfels tx Posts: 57	Re: post all bagged c10 here yea ma bad. im new 2 dis forum thing. n i wanted 24s but busted out da measureing tape n found out it would tuch da top of ma fender on ma step side, so im goin 22s... dis is my 1st c notch 1st project actually and i want 2 do erything on it myself..

09-22-2007, 12:23 PM	#15
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: post all bagged c10 here Not even close to layin frame but here is a pic of mine. This is as low as I could go without modifying the inners fenders and bed. Basically, I have a little less than an inch of clearance from the pumpkin to the lower side of the bed and from the top of the tire to the inner fenders up front. __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

10-04-2009, 04:07 PM	#17
thechevyman Registered User Join Date: Oct 2009 Location: LAPORTE TEXAS Posts: 12	Re: post all bagged c10 here thats a bad truck bro

11-19-2007, 07:36 PM	#19
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: post all bagged c10 here Here's mine. Nothing special, and also not complete __________________ Ethel - The Legend Continues... Ethel has been sold.

11-19-2007, 08:12 PM	#20
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: post all bagged c10 here I think I get the most incomplete bagged C-10 award! __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

11-19-2007, 08:45 PM	#23
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: post all bagged c10 here It's sweet, but takes a lot of time, money, & effort to get em there Heres an update on mine No springs in the back, but should be close to ride height for a while __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 11-19-2007 at 08:49 PM.



Register or Log In To remove these advertisements.

11-28-2007, 10:46 PM	#24
bagged70 Registered User Join Date: Dec 2006 Location: oklahoma Posts: 77	Re: post all bagged c10 here heres minean old one Attached Images

11-30-2007, 06:46 PM	#25
bagged70 Registered User Join Date: Dec 2006 Location: oklahoma Posts: 77	Re: post all bagged c10 here centerline zooms i hope to have it rolling this comming summer

Register or Log In To remove these advertisements.