lets see the worst rust projects - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dean · 10-14-2004, 01:03 PM

My Jimmy would be in this category....no good panels

Dean · 10-14-2004, 01:06 PM

This K20 that I sold Jim was a good candidate for most rusty. It had several generations of bondo in it. One almost broke my foot when it fell from the back of the cab. Jim has it rebodied and looking good now.

toms68cst · 10-14-2004, 05:24 PM

LOL Yes CPNE, that's the one I had In mind. That's one reason I like living in the Midwest VS the Northeast. Not as much salt used.

72c10step · 10-15-2004, 07:38 PM

Here's a couple quick pics of my first truck, and the back part of the frame. If you look closely right above the spring, you can see a large chunk of the frame that rusted away. When I got my 72, me and a couple friends grabbed some parts, and I got rid of the rest.

donkey69 · 10-15-2004, 10:02 PM

......got to throw my 69 on the list!

**passthebuck** · 10-16-2004, 10:21 AM

this is my green 67 that you may have seen before. So far I have replaced all of the floors under the tank, both L & R outer rear floors, L & R front floor pans, all cab supports (some were rotted 3 or 4" past what they give you on the new cab supports so I had to fab up the remainder), out riggers both sides, cab corners, inner & outer rockers, front foot kick panels, inside door corners & outer door bottoms. The front & rear fenders are toast, so is the bedfloor, tailgate & the hood. When I'm done, I'll be using very little of the origional truck! I think this one pic sez it all.

*Gee_Emm* · 10-16-2004, 11:17 AM

I almost forget about this one, I bought this Blazer tub to use the bedsides for my Jimmy, the rest of the truck is in pretty good shape, I ended up using the rocker boxes from this truck and barely had to do anywork to them. This is what 25 years of sitting in a junkyard with carpet on the floors does.

Kurt L · 10-16-2004, 05:17 PM

that mopar is in cars in barns.com.check out the web site for really rusted cars.
www.carsinbarns.com they have pics of furds,chevys,amcs etc.

richards72chevy · 08-02-2012, 09:55 PM

Name: 2330387700103882008S600x600Q85.jpg
Views: 402
Size: 58.7 KB

Name: 2398017110103882008S600x600Q85.jpg
Views: 401
Size: 64.9 KB

**70cst** · 08-02-2012, 10:31 PM

Did someone say rust

big bad orange · 08-02-2012, 10:39 PM

you guys make my truck look great! I was mad that I dont have cab supports and a rusty cab and bed floor ( a couple of small holes)

Car'n'Guitars · 08-02-2012, 11:00 PM

No offense to you guys or your trucks, but your trucks make me feel a little more confident in my truck.

vern650 · 08-02-2012, 11:01 PM

agree with ^^^, some of these make me not feel so bad about myrust bucket. my driver floor board is mostly gone, all 4 cab supports, both rockers, both rear cab corners inside and out, hole in center top of the dash, holes in front of the front fender wells and bed floor is pretty much toast.

Car'n'Guitars · 08-02-2012, 11:05 PM

Quote:

Originally Posted by vern650

agree with ^^^, some of these make me not feel so bad about myrust bucket. my driver floor board is mostly gone, all 4 cab supports, both rockers, both rear cab corners inside and out, hole in center top of the dash, holes in front of the front fender wells and bed floor is pretty much toast.

Pretty much same here except front fenders and dash hole.

sbc10guy · 08-02-2012, 11:17 PM

A little bit of rust on the bed, the frame broke in 2, and the back half of the cab fell competely off when i cut the roof off. Only thing holding it was the fuel line lol.

slipkorn34 · 08-03-2012, 12:44 AM

i walways felt bad since my ds rocker is gone iand the inner rocker only has a couple inches left holding onto the floor. but now im slightly less concerned, just keep workin on it slowly brining it back to life

David67 · 08-03-2012, 01:01 AM

8 year old thread back from the dead! Things should be even more rusty now

Car'n'Guitars · 08-03-2012, 01:02 AM

Or the complete opposite..

bovey · 08-03-2012, 06:05 AM

Not my photo, not a chevy truck, but worth sharing I think you'll agree. Of all the rotten project I have seen, wanted to buy for some crazy reason - in real life or photos, this one is rough.

Katrina/10 · 08-03-2012, 07:16 AM

Glad this came up again, now I don't feel so bad.

OSM 70 C20 · 08-03-2012, 11:14 AM

Name: P1010005.jpg
Views: 293
Size: 54.0 KB

Name: IMAG0080.jpg
Views: 292
Size: 35.3 KB

**70cst** · 08-03-2012, 03:11 PM

Quote:

Originally Posted by Car'n'Guitars

No offense to you guys or your trucks, but your trucks make me feel a little more confident in my truck.

We always try to help out

Posted via Mobile Device

**70cst** · 08-03-2012, 03:13 PM

Come on guys.... a little wax and elbow grease and all cable fixed

Posted via Mobile Device

richards72chevy · 08-03-2012, 10:52 PM

Name: field%20cars%20001.jpg
Views: 226
Size: 91.0 KB

schurg · 08-04-2012, 12:28 AM

dont fret! seems there is always a purchaser for old rust buckets:

http://www.eurocarblog.com/post/2731...lake-discovery

someone spent $250k for that....

10-14-2004, 01:03 PM	#26
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	My Jimmy would be in this category....no good panels Attached Images

10-14-2004, 01:06 PM	#27
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	This K20 that I sold Jim was a good candidate for most rusty. It had several generations of bondo in it. One almost broke my foot when it fell from the back of the cab. Jim has it rebodied and looking good now. Attached Images

10-14-2004, 05:24 PM	#28
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,284	LOL Yes CPNE, that's the one I had In mind. That's one reason I like living in the Midwest VS the Northeast. Not as much salt used. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

10-15-2004, 07:38 PM	#29
72c10step WHYBYNU when old will do? Join Date: Jul 2003 Location: Loudon, NH Posts: 876	Here's a couple quick pics of my first truck, and the back part of the frame. If you look closely right above the spring, you can see a large chunk of the frame that rusted away. When I got my 72, me and a couple friends grabbed some parts, and I got rid of the rest. Attached Images __________________ -72 Chevy C10 Stepside -2002 Chevy Silverado 2500HD 4x4 -1984 Jeep CJ7 -1995 Polaris XCR600 Custom -2003 Honda 300ex

10-15-2004, 10:02 PM	#30
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	......got to throw my 69 on the list! Attached Images __________________ HEY NOW!

10-16-2004, 10:21 AM	#31
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	this is my green 67 that you may have seen before. So far I have replaced all of the floors under the tank, both L & R outer rear floors, L & R front floor pans, all cab supports (some were rotted 3 or 4" past what they give you on the new cab supports so I had to fab up the remainder), out riggers both sides, cab corners, inner & outer rockers, front foot kick panels, inside door corners & outer door bottoms. The front & rear fenders are toast, so is the bedfloor, tailgate & the hood. When I'm done, I'll be using very little of the origional truck! I think this one pic sez it all. Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

10-16-2004, 11:17 AM	#32
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I almost forget about this one, I bought this Blazer tub to use the bedsides for my Jimmy, the rest of the truck is in pretty good shape, I ended up using the rocker boxes from this truck and barely had to do anywork to them. This is what 25 years of sitting in a junkyard with carpet on the floors does.

10-16-2004, 05:17 PM	#33
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	that mopar is in cars in barns.com.check out the web site for really rusted cars. www.carsinbarns.com they have pics of furds,chevys,amcs etc.

08-02-2012, 09:55 PM	#34
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,651	Re: lets see the worst rust projects

08-02-2012, 10:31 PM	#35
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: lets see the worst rust projects Did someone say rust __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-02-2012, 10:39 PM	#36
big bad orange Registered User Join Date: Aug 2011 Location: Pittsburgh, PA Posts: 187	Re: lets see the worst rust projects you guys make my truck look great! I was mad that I dont have cab supports and a rusty cab and bed floor ( a couple of small holes) __________________ just like that old Johnny Cash song. "One piece at a time and I am go na make an old C10 mine a look at all your faces when I drive through your town"

08-02-2012, 11:00 PM	#37
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: lets see the worst rust projects No offense to you guys or your trucks, but your trucks make me feel a little more confident in my truck. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

08-02-2012, 11:01 PM	#38
vern650 Registered User Join Date: Jul 2012 Location: hyrum utah Posts: 45	Re: lets see the worst rust projects agree with ^^^, some of these make me not feel so bad about myrust bucket. my driver floor board is mostly gone, all 4 cab supports, both rockers, both rear cab corners inside and out, hole in center top of the dash, holes in front of the front fender wells and bed floor is pretty much toast. __________________ '67 c10 lwb-"toothpaste fresh" '05 3500 dmax/alli ext.cb lwb 4X4

08-02-2012, 11:17 PM	#40
sbc10guy Registered User Join Date: Sep 2011 Location: Eau Claire, Wisconsin Posts: 415	Re: lets see the worst rust projects A little bit of rust on the bed, the frame broke in 2, and the back half of the cab fell competely off when i cut the roof off. Only thing holding it was the fuel line lol. Attached Images __________________ 1969 shortbed c/10 1998 GMC sierra

08-03-2012, 12:44 AM	#41
slipkorn34 Registered User Join Date: Dec 2009 Location: Eden Prairie, MN Posts: 73	Re: lets see the worst rust projects i walways felt bad since my ds rocker is gone iand the inner rocker only has a couple inches left holding onto the floor. but now im slightly less concerned, just keep workin on it slowly brining it back to life __________________ 1969 mercury cougar XR-7 - sold 1978 Chevy C-10 Scottsdale - sold 1996 chevy k1500 - sold 1970 mercury monterey - sold 1971 chevy c10 4 speed 4x4 - dd



Register or Log In To remove these advertisements.

08-03-2012, 01:01 AM	#42
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: lets see the worst rust projects 8 year old thread back from the dead! Things should be even more rusty now __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-03-2012, 01:02 AM	#43
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: lets see the worst rust projects Or the complete opposite.. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

08-03-2012, 06:05 AM	#44
bovey Registered User Join Date: Mar 2010 Location: Canada Posts: 73	Re: lets see the worst rust projects Not my photo, not a chevy truck, but worth sharing I think you'll agree. Of all the rotten project I have seen, wanted to buy for some crazy reason - in real life or photos, this one is rough. Attached Images

08-03-2012, 07:16 AM	#45
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: lets see the worst rust projects Glad this came up again, now I don't feel so bad. __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100

08-03-2012, 11:14 AM	#46
OSM 70 C20 Registered User Join Date: Jun 2012 Location: Fargo, North Dakota Posts: 140	Re: lets see the worst rust projects __________________ "I taste Rust" I wish I had the money my truck thinks I do I taste "Patina" Last edited by OSM 70 C20; 08-03-2012 at 11:20 AM.

08-03-2012, 03:13 PM	#48
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: lets see the worst rust projects Come on guys.... a little wax and elbow grease and all cable fixed Posted via Mobile Device __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-03-2012, 10:52 PM	#49
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,651	Re: lets see the worst rust projects

08-04-2012, 12:28 AM	#50
schurg Registered User Join Date: Apr 2011 Location: richmond, va Posts: 140	Re: lets see the worst rust projects dont fret! seems there is always a purchaser for old rust buckets: http://www.eurocarblog.com/post/2731...lake-discovery someone spent $250k for that....

Register or Log In To remove these advertisements.