Black Hills blazer build

[bouncytruck]

Thanks for posting the pics. Nice rigs. Looks like you've had a lot of fun with the orange one. You should check out how VTBlazer replaced the rockers on his rig with sliders. He also created some quick-remove door pins so he could pull the doors for summer wheeling.

[swyfor5]

Cool, glad to see some pics! I have always liked the orange too. I once had a 70 gmc longbed 2wd that was red. The paint was so faided it looked orange, to this day the wife and I argue about the color! Any pic's of the shop?

[turp mcspray]

I am going with a 454/400/205 combo. Here are some mock up pics. I wanted to keep the large truck pan so I modified the stock crossmember with a spare that I had. I went this route instead of making one from scratch with tubing so it will still look stock to the casual observer. I ended up dropping the center by two inches.

[turp mcspray]

I moved the crossmember ahead two inches. I then moved the trans/transfer case back one inch. The 400/205 adapter is one inch longer than the 350/205 adapter.So by doing it this way it put the transfer case stick in the same location as it was stock with the 350/350/205. The fan fit perfectly inside the 2wd bb shroud. Half in half out.

[70gmcjimmy]

Cool pics, Scott! Even tho I saw the truck in person, the crossmember pics definitely clarify what you had to go thru to use that bigger pan and to keep from messaging the firewall. Nice work!

Later---DAC

[turp mcspray]

swyfor5, here are a few shop pics.

[Mint68]

Sorry to say, I looked at the photos and those are actually buss hooks. I happen to have a bus missing the hooks, so if you wanna just ship em out....

Sweet blazer, and its a good looking shop also.

[FRENCHBLUE72]

Welcome to the board looks like ya do some pretty sweet rides..

[turp mcspray]

Here's whats been happening in the last month.
I pulled the 454 out of my donor truck. It had been rebuilt but I HAD to open it up for a look. Zero ridge and very obvious hone marks. They also used a double roller chain and had it balanced as well. The guy that had it supposedly spent a buch of money on it. Maybe he did. As I suspected...flat tops. YUCK!! Those will have to go! No 8 to 1 compression for me!LOL!
I thought I was ready to pull the body off the frame but decided that the first time I get a dent in my new GM rockers, I am going to be PO d! So I built some rock sliders. Also figured I would mount my cage now as well.

[turp mcspray]

Here's a few pics with cage in blazer.

[turp mcspray]

Here's a couple with the top on.
Hopefully this weekend the body will come off the frame!

[swyfor5]

Turp, sorry for slacking on reply's. Nice shop setup! Maybe you've seen my threads on the bumper lately, kinda taking up all my spare time here. Getting close to the end of my custom bumper journey! This is the best forum on the web for 1st gens I have ever found, great bunch of guy's here! Keep the pic's coming! I dream of setting up my barn/shop for resto work and look forward to more pic's of how some of you guy's are already "doing" it!

[Yukon Jack]

Good job modifying your engine crossmember - I went that route also to get the necessary clearance. Your pics are great and one of them nicely shows the driver side firewall issue and how that can be addressed by moving the motor forward.

You're doing a great job and I will enjoy watching your project progress!

[turp mcspray]

Here are some pics of my "rocker savers".
I mounted it to the frame at the body mount locations thinking that would be the strongest point. The outer rear tab will mount to the outer most rocker end cap bolt. A very strong location as well. For the front tab I will weld a piece of flat stock with a nut welded to it inside of the rocker box.
Hopefully these will work for that ocassional rock or log that that I drive over against my better judgement.LOL!

[turp mcspray]

Here are a few more.

[turp mcspray]

....and a couple more.

[turp mcspray]

Here's what I got done last weekend.
Finally got the body off the frame!

[turp mcspray]

I needed something for a body cart. I forgot that I had a frame from a rusty blazer that I parted out long ago. I figured it would make an excellent body cart! I wasn't sure if it would be stable enough with the wheels so close together. Once the body was on the frame I decided to ad some pipe to to move the wheels further out for more stability. I left the front clip,doors,tailgate,top,and cage installed for easier storage while I work on the chassis. It is pretty heavy with everything still attached!

[BobbyK]

I think you might have started a new trend with that tire /rim combo.

[70gmcjimmy]

Originally Posted by BobbyK

I think you might have started a new trend with that tire /rim combo.

LOL- I can see Foose havin' to cut 8, 6 and maybe even 4 inch wheels for this new trend that Turp started!

Dang Scott, you are as productive as they come, Man. Nice innovation on the cart and sliders.

Later---DAC

[turp mcspray]

Here's my daily driver. As soon as my clone gets off his dead ass I want to satin black it, with a candy red over flake top. If I didn't have to sleep I could get something done!

[turp mcspray]

Finally making progress on the Blazer again. I am currently getting everything mocked up, as far as the chassis goes. I installed my springs,axles,shocks,etc. Got my 73 up gas tank and skid plate installed.
I've got the exhaust almost finished. I haven't decided where the tailpipes will exit yet.

[turp mcspray]

Finally making some progress again. Right now I am trying to get everything to do with the chassis mocked up.
I got the axles,springs,etc. installed. I have most of the exhaust figured out. I'm not sure yet where the tailpipes will exit.

[turp mcspray]

Sorry for the double post. It's been so long since I've posted pics, I'm having a hard time remembering how to do it!
I'm also adding a traction bar to try and control axle wrap a bit.
I notched the frame rails a bit for the headers. I also decided to use the 73 up shifter linkage, as it will be easier to install, since moving the engine forward put the pivot point right where the cast shackle bracket is rivited to the frame rail.
I still have to fab something to attach the traction bar to, coming from the frame.

[turp mcspray]

And here are a couple more.
Once I get everything mocked up,modified etc., my plan is to blow it back apart so I can sandblast and paint. I better get out the heat lamp and miracle grow so my money plants start producing. I'll need to buy new brake and fuel lines,cross over steering parts etc, not to mention getting started on my engine. Grow money plants grow! LOL!