Stainless Drip Rail? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 11-20-2023, 07:48 AM

Quote:

Originally Posted by CKfan

If anyone out there has a truck they believe came with the trim from the factory and or was dealer installed, any dealer "add-on" invoice or RPO would be of interest to us all.

We have the RPO, B80. Therefore it was a factory option. Some parts like this would be shipped with the truck and installed at the dealership. I don't know that these were done that way

**CKfan** · 11-20-2023, 12:44 PM

Quote:

Originally Posted by special-K

We have the RPO, B80. Therefore it was a factory option. Some parts like this would be shipped with the truck and installed at the dealership. I don't know that these were done that way

Thanks Special K, I saw and noted that Gene had posted B80 in the thread above. The only reference I have seen of it being B80 is from a third party site and not a GM notation.

Does anyone have GM documentation or better yet, an SPID with the B80 on it?
Just hoping for verification.

**D.PASSMORE** · 11-21-2023, 05:33 PM

I know this is old thread but ran across some Golden State parts a few months ago, still in the box, new. Luckly got to purchase it. Headliner trim and drip rail trim. Well-made stuff.

**special-K** · 11-22-2023, 06:59 AM

Quote:

Originally Posted by CKfan

Thanks Special K, I saw and noted that Gene had posted B80 in the thread above. The only reference I have seen of it being B80 is from a third party site and not a GM notation.

Does anyone have GM documentation or better yet, an SPID with the B80 on it?
Just hoping for verification.

You can accept the data found on www.outintheshop.com as verified GM information. It would be nice to see it on a SPID. I believe it was a short-lived option, so a rare bird. One fact is GM made this part and another is there is an RPO for it.

**CKfan** · 11-22-2023, 12:43 PM

Quote:

Originally Posted by special-K

You can accept the data found on www.outintheshop.com as verified GM information. It would be nice to see it on a SPID. I believe it was a short-lived option, so a rare bird. One fact is GM made this part and another is there is an RPO for it.

Special K, thanks for your input and I have no reason to doubt Outintheshop as "verified GM information."

I have used their site and admit they have a great site but Where did they get the information? As their site says quoted below, if they don't have a code listed, send it to them. Perhaps, if they have time, they can share how they verified the B80 code.

From Outintheshops website:
"67-72 RPO Codes
(Regular production options)

This list is exclusive to 67-72 chevy and GMC trucks but if you find that an option is missing drop me a line and I will get it added. Click FIND below to search for a code!"

**leddzepp** · 11-22-2023, 03:05 PM

Quote:

Originally Posted by CKfan

Special K, thanks for your input and I have no reason to doubt Outintheshop as "verified GM information."

I have used their site and admit they have a great site but Where did they get the information? As their site says quoted below, if they don't have a code listed, send it to them. Perhaps, if they have time, they can share how they verified the B80 code.

From Outintheshops website:
"67-72 RPO Codes
(Regular production options)

This list is exclusive to 67-72 chevy and GMC trucks but if you find that an option is missing drop me a line and I will get it added. Click FIND below to search for a code!"

Jeff has been collecting SPIDs for many years and has over 1000 of them, which is where he has sourced most of the RPOs.

**CKfan** · 11-22-2023, 04:16 PM

Quote:

Originally Posted by leddzepp

Jeff has been collecting SPIDs for many years and has over 1000 of them, which is where he has sourced most of the RPOs.

Excellent, we may finally see an SPID then.

**1970cstblazer** · 11-23-2023, 04:13 PM

Jeremiah King should be responding to this thread. He is an active member still..

**jocko** · 11-24-2023, 12:17 AM

I'm not convinced B80 is associated with or was offered on these trucks. The only place I've ever seen B80 drip rail molding is on a Chevelle. Has anyone every seen B80 on a truck of this era? Would love to see one if it's out there!

**Already Gone** · 09-30-2024, 07:04 PM

I had an original 69 CST and the drip rail wasn't on it. Now my truck could have been built after GM cancelled the option. I saw the molding ona truck at a Car Show the otHer day and want it for my truck. Pictured is the truck I had.

11-21-2023, 05:33 PM	#28
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Stainless Drip Rail? I know this is old thread but ran across some Golden State parts a few months ago, still in the box, new. Luckly got to purchase it. Headliner trim and drip rail trim. Well-made stuff. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-23-2023, 04:13 PM	#33
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,665	Re: Stainless Drip Rail? Jeremiah King should be responding to this thread. He is an active member still.. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

11-24-2023, 12:17 AM	#34
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Stainless Drip Rail? I'm not convinced B80 is associated with or was offered on these trucks. The only place I've ever seen B80 drip rail molding is on a Chevelle. Has anyone every seen B80 on a truck of this era? Would love to see one if it's out there!

09-30-2024, 07:04 PM	#35
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: Stainless Drip Rail? I had an original 69 CST and the drip rail wasn't on it. Now my truck could have been built after GM cancelled the option. I saw the molding ona truck at a Car Show the otHer day and want it for my truck. Pictured is the truck I had. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.