OR Parting Chevy 67 trucks

[chrisj930]

Yes, the 327 truck had AC. I will post a pic tomorrow.
Posted via Mobile Device

[chewychevy67]

if it is the stock 1967 fan and clutch i will take it. pending pic's.

[chrisj930]

Originally Posted by chewychevy67

if it is the stock 1967 fan and clutch i will take it. pending pic's.

Here are a couple pics of the 2 that I have. Let me know if one of these is what you're after.

[chewychevy67]

the 67 truck with air i believe uses fan 3883159 and it is a 5 blade 18" fan. I have a pic of the fan i need and it looks exactly like yours. i have a nos clutch so i will post pics of the measurments i need for the fan. across the hub is 2 9/16", the holes side to side centered are 2 3/8", and across they are 3 1/4". if one of those fans has these measurements (and for sure if the part # matches) i will take it. If you have 2 i know of another member possibly needing this fan as well. how much $ for the fan. i will take the clutch as well if you wont seperate them. Rod

[Twisted78SS]

Do you have a title to go along with the frame?

[chewychevy67]

i'd be interested in the power steering pulley in the pic's as well if its available without the pump.

[chrisj930]

Originally Posted by chewychevy67

the 67 truck with air i believe uses fan 3883159 and it is a 5 blade 18" fan. I have a pic of the fan i need and it looks exactly like yours. i have a nos clutch so i will post pics of the measurments i need for the fan. across the hub is 2 9/16", the holes side to side centered are 2 3/8", and across they are 3 1/4". if one of those fans has these measurements (and for sure if the part # matches) i will take it. If you have 2 i know of another member possibly needing this fan as well. how much $ for the fan. i will take the clutch as well if you wont seperate them. Rod

Fan matched your description. No part number stamped, but both trucks were 327 powered with AC and boths fans are identical. Measurements listed all match and the fan has five blades.

$60 plus shipping. UPS estimate is 25 bucks to the great white north.

Chris

[chrisj930]

Originally Posted by Twisted78SS

Do you have a title to go along with the frame?

Frame sold today.

thanks

[69rut]

Looking for an AC dash. How is this one? Cut up in radio area? Anywhere else?

[chewychevy67]

Originally Posted by chrisj930

Fan matched your description. No part number stamped, but both trucks were 327 powered with AC and boths fans are identical. Measurements listed all match and the fan has five blades.

$60 plus shipping. UPS estimate is 25 bucks to the great white north.

Chris

PM sent

[chrisj930]

Originally Posted by 69rut

Looking for an AC dash. How is this one? Cut up in radio area? Anywhere else?

Dash has a DIN radio hole in it.

[chewychevy67]

hey chris do you still have a fan left?

[chrisj930]

Originally Posted by chewychevy67

hey chris do you still have a fan left?

Yes I do. Yelmer was just asking about this as well.

[chewychevy67]

i was just askin for yelmer. he was still needin one.

[ajgriffin]

If you decide to part out the front clip, I need a hood, the grill and hood latch. Would like to see more detailed pics to see the condition as well.
Posted via Mobile Device

[Delta9]

Do you still have the spinner center caps? All 4? 5 lug?

[MadnessBigBlock]

Do you have 67 ram assist power steering set up i am in need of one!

[kingfoo]

How about those sunvisirs? Still have them available? If so, how about $35.00 shipped to Utah..84067. I will paypal you...thanks

[Classic Bowties]

Originally Posted by MadnessBigBlock

Do you have 67 ram assist power steering set up i am in need of one!

If chrisj930 is unable to help on this, I have the complete ram assist w/pump setup off of this parted 67 CST: http://67-72chevytrucks.com/vboard/s...d.php?t=472448

Once chrisj930 answers ya back on availability, I can then give you more details about the above setup. Mel

[67_ShortFleet]

Do you have an original air cleaner? I think I see one in the pass side.

[old Chevy guy]

How are the doors? Ive been trying to work out a sale on some good doors with a few people on the board but the price plus the shipping is coming out to be to much.I need some not rusted decent doors for my work truck,I have a whole cab almost all restored but no good doors. I have another whole truck I can and will most likely buy locally that has mint doors but the cab is nearly perfect too and besides the fact that I already fixed one for this truck that cab is really too nice for this work truck. Id like to keep it complete for a diffrent project I hope to do that involves a K10 frame some K20 axles and suspention and a 67 Camper cruiser body with AC, tinted windows and a set of buddy buckets. The truck I need the doors for is a stake body dump that we use for firewood and demalition debris and torn off roof shingles. Needs to be legal and pass state inspection but not perfect. If you still have the doors and they are not all rotted can I see pictures? Id be interested in buying them stripped and would need a price shipped to RI. The closest place would be Newport by greyhound. Sorry to write a novel just dont want people to think Im jerking them around by trying to get so many prices. Thanks for your time.

[chrisj930]

Originally Posted by MadnessBigBlock

Do you have 67 ram assist power steering set up i am in need of one!

Sorry. Do not have.

Thanks
Posted via Mobile Device

[chrisj930]

Originally Posted by old Chevy guy

How are the doors? Ive been trying to work out a sale on some good doors with a few people on the board but the price plus the shipping is coming out to be to much.I need some not rusted decent doors for my work truck,I have a whole cab almost all restored but no good doors. I have another whole truck I can and will most likely buy locally that has mint doors but the cab is nearly perfect too and besides the fact that I already fixed one for this truck that cab is really too nice for this work truck. Id like to keep it complete for a diffrent project I hope to do that involves a K10 frame some K20 axles and suspention and a 67 Camper cruiser body with AC, tinted windows and a set of buddy buckets. The truck I need the doors for is a stake body dump that we use for firewood and demalition debris and torn off roof shingles. Needs to be legal and pass state inspection but not perfect. If you still have the doors and they are not all rotted can I see pictures? Id be interested in buying them stripped and would need a price shipped to RI. The closest place would be Newport by greyhound. Sorry to write a novel just dont want people to think Im jerking them around by trying to get so many prices. Thanks for your time.

I have a set of doors that are ok. Not rusty but have holes for speakers cut in them. I'd want 100 for the pair, but shipping cross country would be pretty expensive.
Posted via Mobile Device

[chrisj930]

Originally Posted by 67_ShortFleet

Do you have an original air cleaner? I think I see one in the pass side.

I have a stock 4 barrel air cleaner. Has some rust and needs to be blasted and painted. 50 plus shipping.
Posted via Mobile Device

[old Chevy guy]

Depending on the weigh its around$175 or less on greyhound for a pair shipped seperatly. Could you post any pics? or send some to my phone if thats easier? I can pm my number if you want to do that .