1950 GMC 3100 "handmedown" project

[Steve-W]

Originally Posted by iowaboynca

Probably the Dutch reasoning of making sure everything is square before you can register it there.

Yup, thats it exactly

[Steve-W]

Small update, because we're mostly busy painting some trim and sorting stuff waiting for the DMV. but in the mean time we contacted the company who imported this truck back in 1996(!) to see if they still had any records..

no was the answer, but the guy said that when he's back in Holland (he roaming around Cali looking for cars) he's be able to help us out for $1000,-...
ehhh let's see what his plan is before forking over the money.
tbc!

[Steve-W]

Still no update on the DMV stuff, so busy ordering bits and pieces, painting and repairing the steering wheel.
We visited a small old-timer meeting in a former car museum, which is now converted to a conference center.













My favorits? the 50's Cab-over truck and the panel van...yes I like patina

[RockinKees]

Hope it works out for you, that registration problem!

Woodwork looks good in the back

[Steve-W]

Originally Posted by RockinKees

Hope it works out for you, that registration problem!

Woodwork looks good in the back

thanks, we're first mocking everything up, to see how everything fits together. then we disassemble, paint and the put it all together.

one of the problem's we found is that the aftermarket front bed panel sits about an inch to low. we can solve the bolts not lining up, but optically it's just a bit off.

[RockinKees]

Panel from Prins Trucks?
Let him measure an other one to see if this is a wrong piece.
Before you drill and weld something that's not nessesary....

[Steve-W]

Originally Posted by RockinKees

Panel from Prins Trucks?
Let him measure an other one to see if this is a wrong piece.
Before you drill and weld something that's not nessesary....

We already figured it out by adjusting a few holes, so it fits nicely now.
we pulled it apart again, because the bedsides and fenders are going to need a hell of a lot TLC, but more about that later!
we have been finishing the doors. all painted and assembled. I'm amazed how easy these doors go in compared to my '69.





then the outer trim was put in place, this is such a #$!$%$ job...so easy to scratch the paint, which we did of course, but nothing that can be fixed.
in stead of screws we re-drilled the holes and used rivets to hold them in.



We tackled a other big hurdle, hood alignment!
we followed the incomprehensible description on Stovebolt, but managed to get the hood where we wanted. we had to ad a shim to the radiator support and loosened all the fender bolts. we will have to widen some hole in order to get everything buttoned up again, but this is where we are at the moment.

[Big Daddy Bear]

Very nice! Love that simple, clean look!!

[RockinKees]

It's coming along Steve!
In the pics the hood sits pretty good!

[Steve-W]

thanks guys! Friday night we'll see if we can get it even tighter, if not it's coming off for paint.

in the meantime, I've opened a thread in the parts section, because we're looking for the center dash cover and glove box door.

http://67-72chevytrucks.com/vboard/s...69#post7506969

[Chevy-49]

Did you solved the DMV problem

[Steve-W]

Originally Posted by Chevy-49

Did you solved the DMV problem

Nope, not yet. But somebody is working on it and at the end of March we should be out of the woods

[Steve-W]

Ferry did some amzing work on one of the hood corners, it was missing a piece due to rust, and he tig welded a small piece in, looks amazing!




we also completed the doors and found out that the damn aftermarket window regulators are off by an inch!



so the 2 choices we have is: buy new regulators, or make brake which will cause the window to stick out of the door in the rolled down position..any thoughts?

we then installed inside window fellt and screw it tight. still it sticks out a bit above the trim..is this normal?



put in the door panels, but we need the trim, 'cause they are bulging and that makes it look funny.

[Advanced Design]

The monthly gathering with 200 is a good turn out. Nice rides!

[RockinKees]

Congratz on your paperwork!
Getting it at Durch license shouldn't be difficult

Always nice to do the PO's work over

Gonna look good Steve!!

[Steve-W]

Yesterday afternoon I drove by the shop only to find Ferry doing a great deal of work on the bed. first he found this incredible nice piece of equipment:


and then turned his attention to the sheet metal that had come away from the bed stake pockets. it had been repaired in the past..and I mean really the past, because when sawing and grinding we struck gold!!


ok ok, not real gold..but a kind of brass? I had no idea people used that to 'weld', but any way we got it removed so we could line up the side with the pockets again and then spotwelded them in place.













so that's a major hurdle out of our way, and to quote a popular dutch saying:
"Good tools, do half the work"
which is so true, because try this in just a day without a spot welder..

[Advanced Design]

I like the popular Dutch saying about tools too. I will take all the good tool help I can get.

Looked like the bed had been brazed on at one time. I seen that a lot on the last truck I did.

Nice repair with the spot welder.

[Steve-W]

Thanks Doug!,

here's 2 more pictures of the repairs, with our mates Challenger featured in the background



in the meantime we turned our attention to the bed wood, which ferry had already made to fit and sanded. now it was time to put a few layers of lacquer. unfortunately I fogot to take pictures at the first 3(!) layers, so this is layer 4




now only 4 layers to go!

[Steve-W]

*bump*

Soon I'll post the update with some really cool pictures..because we're almost done!! It's been a journey with leaking crankseals, waterpumps, master brake cylinders..but more about that later. We're nearing completion and only some small stuff to take care of.

here a sneak preview of how the bed looks like now.


we call it "JD-Brown"

[iowaboynca]

That's good to hear. Can't wait to hear!

[Advanced Design]

Sneak preview of the bed looks really good!

[RockinKees]

We're waiting for the reveal Steve...

So far it looks great!!

[Steve-W]

So.. here are the final pictures, she's done! last hiccup were a leaking rear crankseal, which we fixed with the original hemp rope like seal..funny stuff, but it works. then we had 3 brake cilinders and the master brake cilinder who leaked, so we just replaced it all. the waterpump was giving us headaches because it came of twice (first we rebuild it using jeep parts) and still continued leaking. but then we found out it was the thermostat housing.
last friday Ferry rebuild the vacuum wiper motor and now thats in working order as well.

here are the pictures as promised:

[iowaboynca]

very nice!