AZ 72 Big block 2wd truck for parts

[cheyenne402]

ttt for ya?

[cpisani70@aol.com]

Is the exhaust still for sale?
Posted via Mobile Device

[t korinek]

Heres the shipping quote to shortfleet $90 by greyhound, if he passes then I still have the exhaust.
The doors were already gone
Thanks,
Tom

[70shortfleet]

Originally Posted by t korinek

Heres the shipping quote to shortfleet $90 by greyhound, if he passes then I still have the exhaust.
The doors were already gone
Thanks,
Tom

Tom, I think I will pass on the exhaust. It looks like you have a couple of others interested, so let one of them have it, thanks Les

[POPO1984]

How are the doors

[POPO1984]

Ok thanks

[1sik7t2]

selling any bed parts? i need the tail light pockets (basically the whole corner or body cut about an inch around hole, both sides) please let me know dave






QUOTE=t korinek;4823388]3/4 ton 2wd truck for parts
engine bracket set includes everything except the rod from the alternator to the intake
Includes power steering , ac brackets, pulleys $525 shipped

working A6 compressor $60+ shipping

all Ac was working & charged

sway bar with brackets $40 + shipping

Selling pieces & patches of the cab

72 throttle pedal with turbo 400 kickdown $45 shipped

72 only frame mounts & clamshells $140 shipped

exhaust guard on cab $22 shipped

high hump for auto $80 shipped

dual exhaust for big block with flowmasters $125

Dana 60 4.10 gear $150

big block exhaust hangars all 6 $55 shipped

Anything else, ask & I'll price it
Parts also for sale locally
Thanks,
Tom[/QUOTE]

[71blksuper4x4]

Tom, I am still interested in the Big Block exhaust brackets. Trevor

[1sik7t2]

selling any bed parts? i need the tail light pockets (basically the whole corner or body cut about an inch around hole, both sides) please let me know dave






QUOTE=t korinek;4823388]3/4 ton 2wd truck for parts
engine bracket set includes everything except the rod from the alternator to the intake
Includes power steering , ac brackets, pulleys $525 shipped

working A6 compressor $60+ shipping

all Ac was working & charged

sway bar with brackets $40 + shipping

Selling pieces & patches of the cab

72 throttle pedal with turbo 400 kickdown $45 shipped

72 only frame mounts & clamshells $140 shipped

exhaust guard on cab $22 shipped

high hump for auto $80 shipped

dual exhaust for big block with flowmasters $125

Dana 60 4.10 gear $150

big block exhaust hangars all 6 $55 shipped

Anything else, ask & I'll price it
Parts also for sale locally
Thanks,
Tom[/QUOTE]

[Dieselwrencher]

Any fire wall forward a/c stuff left?

[t korinek]

Dieselwrencher only ac stuff left is the big block ac brackets
I know I have a driver side tail light section cut off all ready, I'll have to check on passenger side $40 each if you want them

71blksuper4x4, I still have the exhaust mounts, the rubber was burned out of 2 or 3 of them.

Still have the exhaust, it would have to be cut about 3 times to make shipping by greyhound reasonable.

[1sik7t2]

can i get a picture of them please thx dave





=t korinek;4853902]Dieselwrencher only ac stuff left is the big block ac brackets
I know I have a driver side tail light section cut off all ready, I'll have to check on passenger side $40 each if you want them

71blksuper4x4, I still have the exhaust mounts, the rubber was burned out of 2 or 3 of them.

Still have the exhaust, it would have to be cut about 3 times to make shipping by greyhound reasonable.[/QUOTE]

[cheyenne402]

Originally Posted by t korinek

Dieselwrencher only ac stuff left is the big block ac brackets
I know I have a driver side tail light section cut off all ready, I'll have to check on passenger side $40 each if you want them

71blksuper4x4, I still have the exhaust mounts, the rubber was burned out of 2 or 3 of them.

Still have the exhaust, it would have to be cut about 3 times to make shipping by greyhound reasonable.

I will pass on exhaust at this time. I think shipping to Michigan would kill it.

Thanks.

[jacklegjim]

If you still have the motor mounts how much for them.
Thanks Jim

[t korinek]

$125 shipped for the mounts
Posted via Mobile Device

[REEDS 72]

hi looking for the ps res that mounts on the fender is it in good shape no dents shipping to 84003 thanks

[windmill]

did monty buy the front crossmember between the spring hangers? if not i'm interested..

[t korinek]

windmill, monty bought the crossmember

reed72, looking to sell the ps as a set

BigO61 I'll have to get pics next week, be out until then
Thanks,
Tom

[REEDS 72]

Thats fine on the ps how much for it as a set thanks reed

[zeusflash]

Interested in the a/c brackets if you will separate them. Price with shipping to 83854 please.

[Midniteotto]

I know this is a old thread, but looks like there is still some parts avaliable, I'm needing the shifter rod and brackets for bbc with th400, and how much for the power steering setup shipped to 35640? thanks!

[t korinek]

Midniteotto
$170 shipped for the power steering set up, I also have a stainless line set up brand new I'd sell for $85 , if you needed it, its from pickmup the last time he had the stainless hoses made, (now $95)
I have the big block shift rod & linkage, for $95 shipped. That includes all the pieces + the arm that bolts to the frame & a new piece of linkage with the spring that attaches to the transmission.
Thanks,
Tom

[villa 66]

What would you take for both spindels,rotors,and calipers? Shipped too: Tx 78570. I quess throught Greyhound. Thanks, Noe

[t korinek]

villa 66
I have gotten rid of that part of this truck, I do have another 72 that all that stuff looks like it was new or rebuilt & then never driven on, it has been sitting outside, but the brake system is sealed.
I can get some pics if needed.
I'd take $240 shipped for all of it. That's 2 boxes @ 60# each fed ex
Thanks,
Tom

[t korinek]

Heres pics of the 8 lug front disc brakes