tablet for head console???

[jimmydean]

Originally Posted by hairlesshobo

The center speaker cutout in the dash is just asking for a center surround channel Lol.

I am using 2 Kicker 3.5" 2 ways as a center in my 66 dash. Works awesome.

[kikkegek]

Originally Posted by hairlesshobo

I plan to do a 5.1 setup in my truck, but I will be running a surround capable card in my Linux box and just have multiple channels running to the necessary components. Not "cool" by any means, but it will do the trick. I will handle the surround processing using pulseaudio so that no special gear will be needed. The center speaker cutout in the dash is just asking for a center surround channel Lol.

cool! will you have a build thread anywhere here on the forum?

you probably wanna use a non-rotating HD like those new Solid State Disks?

[jimmydean]

Originally Posted by kikkegek

cool! will you have a build thread anywhere here on the forum?

you probably wanna use a non-rotating HD like those new Solid State Disks?

My netbook is SSD, it's awesome. It's been through hell without issue. I will use it to connect the tablet if I don't feel like trying to take it in and out.

[74baggedbug]

I'm using my iPhone as my head unit.. But didn't want always have a wire plugged in to my phone so I went wireless and use my Bluetooth
Posted via Mobile Device

[hairlesshobo]

Yeah definitely go with some sort of solid state media, even if it's a usb thumb drive, as long as it's a higher quality one it can be made to work well with a little kernel tweaking.

How do the Kicker 3.5" speakers sound? My front 3.5s sound like ass and I need to replace them. I wanted to try before buying some but nobody in town sells them so I can't demo them. I just want something that has good clarity and well rounded, doesn't need to carry ANY low end because I have my 12 and my two rear speakers for that.

[kikkegek]

these look interesting...

http://shop.vic-ltd.com/index.php?language=en

[jimmydean]

I am building (I built one, but might change it a little based on the trans I use) a center console, the tablet mounts just under the dash in front of the shifter. Its not as awkward as it sounds. Glare shouldn't be an issue at all. Once I figure out the tablet to use (something sub $200 with Android 4 rooted) I will figure out a mount system. I would like it to be easily removable.

I was going to put it in the dash, but I don't like that idea (even though I cut the hole out already )

[jimmydean]

My little kickers kick ass. I got them for $20 from a little bodega stereo shop that had some quality gear mixed in with the crap. i just made a plate out of 1/2 mdf to mount under the dash and it clears the wiper and ash tray.

[hairlesshobo]

I'd love to see some pics of your console.

Any chance you know the model if your speakers. if I can find a pair online I will go ahead and order them
Posted via Mobile Device

[jimmydean]

Photobucket is blocked at work, but if you look at the last page or two of my build you can see it. It's basic, fits around the shifter and will have 2 cup holders in the top. The top will be wood grain to match the steering wheel and trim. I want to do a roll top cover for the tablet.

But I built it in about 10 minutes using the original 4 speed. I have an M20 that will go in it, but that might all change if I go LS/T56. I had some scrap laying around, so I threw it together. I need a coffee cup holder in my truck.

<edit> I think these are the right pics, but I can't see them from here.

[hairlesshobo]

yeah that's them. I have bounced back and forth with the idea of doing something similar with building a console for holding the screen. Glad to see someone who has actually done so already.

[jimmydean]

We used to build these for VW's back in the late 80's to fit all sorts of things. I need a middle seat, otherwise I would have gone with a modified Cadillac console.

But now that my shifter location is up in the air, this could be a "for now" fit.

[camshaftgsxr]

just a thought i had, maybe you could mount a head unit out of sight in the glove box, then run a head phone jack to a mount and hook it up that way, you still have a head unit for cds and radio, but you're visual control is the tablet or phone.

[hairlesshobo]

Originally Posted by camshaftgsxr

just a thought i had, maybe you could mount a head unit out of sight in the glove box, then run a head phone jack to a mount and hook it up that way, you still have a head unit for cds and radio, but you're visual control is the tablet or phone.

If you were to go that route, it would be incredibly beneficial to have steering wheel controls so you can control the volume, station, track, etc
Posted via Mobile Device

[jimmydean]

Originally Posted by hairlesshobo

If you were to go that route, it would be incredibly beneficial to have steering wheel controls so you can control the volume, station, track, etc
Posted via Mobile Device

I still have no idea what I am going to do with my steering wheel controls. My first thought was to tie it into my air ride setup, but who knows. I have a bunch of buttons to play with.

[runpasthefence]

I saw this thread while poking around and thought I'd revive it as I've just decided to go this route in my 50 half ton.

I'm in the middle of swapping a 69 frame, blown LQ9, and 4L80 into my 50 AD. Rather than retrofit a bunch of digital gauges into the dash, I planned on using an AVIC N4 motorized 7" navigation unit and HKS's CAMP 2 monitoring system to display gauges.

The N4 is a little dated and more complex than needed. CAMP 2 is a great system. It reads OBDII information and is expandable to read other temp sensors, boost, etc. However, they do not offer a wideband option.

I've been needing a reason to buy an iPad, and I think I've found it.

Take this http://www.plxkiwi.com/kiwiwifi/hardware.html
with some its extra sensors (A/F, boost/vacuum for me) http://plxdevices.com/sensormodules.html
throw in an app to put it all together - http://www.palmerperformance.com/pro...hone/index.php

and viola!

I'm stoked. I like that I can use my phone if I don't want to lug the iPad around with me. Real time read-outs and data logging done by wifi. Plus, all of the great features of the iPad. Music storage, turn by turn navigation, etc.

I'll try to keep this updated as I figure out how I make this look decent in a 1950 pick up.

Anyone need an AVIC N4 and HKS CAMP 2?

DashcommandTutorial.MP4 - YouTube

- you should probably just ignore the dude yapping in the video.

[drewskiren]

Originally Posted by runpasthefence

I saw this thread while poking around and thought I'd revive it as I've just decided to go this route in my 50 half ton.

I'm in the middle of swapping a 69 frame, blown LQ9, and 4L80 into my 50 AD. Rather than retrofit a bunch of digital gauges into the dash, I planned on using an AVIC N4 motorized 7" navigation unit and HKS's CAMP 2 monitoring system to display gauges.

The N4 is a little dated and more complex than needed. CAMP 2 is a great system. It reads OBDII information and is expandable to read other temp sensors, boost, etc. However, they do not offer a wideband option.

I've been needing a reason to buy an iPad, and I think I've found it.

Take this http://www.plxkiwi.com/kiwiwifi/hardware.html
with some its extra sensors (A/F, boost/vacuum for me) http://plxdevices.com/sensormodules.html
throw in an app to put it all together - http://www.palmerperformance.com/pro...hone/index.php

and viola!

I'm stoked. I like that I can use my phone if I don't want to lug the iPad around with me. Real time read-outs and data logging done by wifi. Plus, all of the great features of the iPad. Music storage, turn by turn navigation, etc.

I'll try to keep this updated as I figure out how I make this look decent in a 1950 pick up.

Anyone need an AVIC N4 and HKS CAMP 2?

DashcommandTutorial.MP4 - YouTube - you should probably just ignore the dude yapping in the video.

I have this setup now and it is CRAP. The software is so buggy I can't even get it to stay connected for over 5 minutes. I have emailed them repeatedly and have gotten zero help. I wish it really worked like they act like it does.

[runpasthefence]

Where is the problem? Is it poor application performance, or does it have to do with the PLX products?

[Sick5]

Wow I like the dash tablet. Only one thing that would drive me crazy. HAving to switch it to gauges every time

[runpasthefence]

I did a little more research and found some people are reporting connectivity problems with the PLX Kiwi system.

Give this a look. It appears they updated the firmware at some point. I'm not sure that solved any problems, though. http://plxdevices.com/forum/viewforum.php?f=1

I've also read that DashCommand users were having problems after updating to IOS5. I believe there's been a recent update there as well. http://www.palmerperformance.com/for...php?board=13.0

The forums are a pain in the ass because it appears people don't know how to differentiate between issues they're having with their vehicle vs. issues with PLX vs. issues with DashCommand...so it all gets intermingled.

This is discouraging, but it looks like PLX stands behind their product pretty well. If that's your problem and you've purchased in the last year it appears they'll replace your unit free of charge.