''Project '64 SYT Super Yenko Truck" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TwiggyTheDrummer · 03-04-2009, 10:27 PM

And to answer your question, air shocks down.

protrash64 · 03-05-2009, 12:58 AM

Cool lookin project you've got going. I was checking out the fuel cell ....I should have mounted mine that way. I put the 'dump' on the side and it interfered with the bed support.

jgh64pkup · 03-05-2009, 01:23 PM

im actually going to lower it down in the bed
i used to have the sump to the side but i had no place to mount my fuel pump

jgh64pkup · 03-06-2009, 10:02 PM

here are some more pics
pic1: removed the grill and support
pic2: got some body work done on the fender extensions
pic3: these are my 3 inch flowmaster delta forces(not finished yet)

jgh64pkup · 03-06-2009, 11:07 PM

i just completed a rendering of the truck with the yenko stripe its not perfect but it looks ok

TwiggyTheDrummer · 03-07-2009, 07:20 PM

I'd just keep them. It all bolts together which adds a little more strength up there.

jgh64pkup · 03-07-2009, 08:02 PM

thats a good point thanks

jgh64pkup · 03-19-2009, 10:44 PM

i made one exhaust tip for my truck still have to make the other one(thats the only bad thing about dual exhaust you have to make two) but what do you think

jgh64pkup · 03-19-2009, 10:45 PM

heres some more

joe231 · 03-19-2009, 10:59 PM

cool!
where is your exhaust going to exit?

jgh64pkup · 03-20-2009, 08:02 AM

in front of the rear tire
i ordered some exhaust tubing it will be here today
i will fab up my exhaust today and sunday
because tomorow we are going to pinks all out
i will definitly post some pics

jgh64pkup · 03-22-2009, 10:17 PM

here are some pics from pinks

i know its a mopar but i couldn't resist

jgh64pkup · 03-22-2009, 10:23 PM

heres some more

the silver camaro is the one who won

jgh64pkup · 03-22-2009, 10:29 PM

here are some pics of my exhaust
dont look at the crappy welding
i decided to put some header dumps on it (yes they are illegal but whos gonna look until i open them up which will be louder than hell)

joe231 · 03-23-2009, 08:02 AM

cool!!

72BlckButy · 03-23-2009, 08:16 AM

Great looking project, nice work!

jgh64pkup · 03-24-2009, 07:57 AM

thanks but i dont know about the nice work part

jgh64pkup · 04-18-2009, 10:27 PM

i went to a swap meet this weekend i was hoping to pick up more stuff but only came back with a race starter and a cowl

jgh64pkup · 04-20-2009, 09:49 PM

the starter needs a new pinion gear (bendix) so i have one on the way from summit it cost 25$
link

here are some pics i took today
the car is a 1970 mustang mach1

jgh64pkup · 04-20-2009, 09:52 PM

does anyone know anything about detroit deisel 6-71 blowers such as the drive kit and what needs to be modified to make it gasoline

75gmc454 · 04-21-2009, 10:39 PM

Your truck is looking great.

jgh64pkup · 04-22-2009, 09:32 PM

thanks
my mom was filmin and she got scared when i almost hit the wall so its only six seconds long

http://videos.streetfire.net/video/crappy-burout-2...

im waiting for the other videos to load

jgh64pkup · 04-22-2009, 09:38 PM

here are some pics of the starter with the new pinion gear
and a pic of the old one

jgh64pkup · 04-28-2009, 06:11 PM

im building some speaker boxes (6x9) and some kick panels (61/2)
ive got the speaker boxes done i still like one more kick panel
i will post some pics as soon as i get the kick panel done and get the rest of my carpet in

dolphman88 · 04-29-2009, 11:28 AM

hey.. truck looks and sounds good.. but im guessin you still want street power... i know it doesnt matter when the cutouts are open, but when they arent, you lose power by having ur mufflers too close to your headers.. your supposed to move them as far away from them as you can... just my .02

03-04-2009, 10:27 PM	#1
TwiggyTheDrummer Keep It Simple Stupid.. Nope.. Join Date: Jan 2009 Location: Live Oak, FL Posts: 665	Re: my 64 And to answer your question, air shocks down. __________________ 1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks

03-05-2009, 12:58 AM	#2
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: my 64 Cool lookin project you've got going. I was checking out the fuel cell ....I should have mounted mine that way. I put the 'dump' on the side and it interfered with the bed support. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

03-05-2009, 01:23 PM	#3
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 im actually going to lower it down in the bed i used to have the sump to the side but i had no place to mount my fuel pump __________________ Gage 1967 C10 Shortbed Stepside

03-06-2009, 10:02 PM	#4
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 here are some more pics pic1: removed the grill and support pic2: got some body work done on the fender extensions pic3: these are my 3 inch flowmaster delta forces(not finished yet) Attached Images __________________ Gage 1967 C10 Shortbed Stepside

03-06-2009, 11:07 PM	#5
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 i just completed a rendering of the truck with the yenko stripe its not perfect but it looks ok Attached Images __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 03-06-2009 at 11:07 PM.

03-07-2009, 07:20 PM	#6
TwiggyTheDrummer Keep It Simple Stupid.. Nope.. Join Date: Jan 2009 Location: Live Oak, FL Posts: 665	Re: my 64 I'd just keep them. It all bolts together which adds a little more strength up there. __________________ 1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks

03-07-2009, 08:02 PM	#7
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 thats a good point thanks __________________ Gage 1967 C10 Shortbed Stepside

03-19-2009, 10:44 PM	#8
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 i made one exhaust tip for my truck still have to make the other one(thats the only bad thing about dual exhaust you have to make two) but what do you think Attached Images __________________ Gage 1967 C10 Shortbed Stepside

03-19-2009, 10:45 PM	#9
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 heres some more Attached Images __________________ Gage 1967 C10 Shortbed Stepside

03-19-2009, 10:59 PM	#10
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 cool! where is your exhaust going to exit? __________________ *CHEVY ONLY*

03-20-2009, 08:02 AM	#11
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 in front of the rear tire i ordered some exhaust tubing it will be here today i will fab up my exhaust today and sunday because tomorow we are going to pinks all out i will definitly post some pics __________________ Gage 1967 C10 Shortbed Stepside

03-22-2009, 10:17 PM	#12
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 here are some pics from pinks i know its a mopar but i couldn't resist Attached Images __________________ Gage 1967 C10 Shortbed Stepside

03-22-2009, 10:23 PM	#13
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 heres some more the silver camaro is the one who won Attached Images __________________ Gage 1967 C10 Shortbed Stepside

03-22-2009, 10:29 PM	#14
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 here are some pics of my exhaust dont look at the crappy welding i decided to put some header dumps on it (yes they are illegal but whos gonna look until i open them up which will be louder than hell) Attached Images __________________ Gage 1967 C10 Shortbed Stepside

03-23-2009, 08:02 AM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 cool!! __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

03-23-2009, 08:16 AM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: my 64 Great looking project, nice work! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-24-2009, 07:57 AM	#17
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 thanks but i dont know about the nice work part __________________ Gage 1967 C10 Shortbed Stepside

04-18-2009, 10:27 PM	#18
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 i went to a swap meet this weekend i was hoping to pick up more stuff but only came back with a race starter and a cowl __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 04-18-2009 at 10:28 PM.

04-20-2009, 09:49 PM	#19
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 the starter needs a new pinion gear (bendix) so i have one on the way from summit it cost 25$ link here are some pics i took today the car is a 1970 mustang mach1 Attached Images __________________ Gage 1967 C10 Shortbed Stepside

04-20-2009, 09:52 PM	#20
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 does anyone know anything about detroit deisel 6-71 blowers such as the drive kit and what needs to be modified to make it gasoline __________________ Gage 1967 C10 Shortbed Stepside

04-21-2009, 10:39 PM	#21
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: my 64 Your truck is looking great.

04-22-2009, 09:38 PM	#23
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 here are some pics of the starter with the new pinion gear and a pic of the old one Attached Images __________________ Gage 1967 C10 Shortbed Stepside

04-28-2009, 06:11 PM	#24
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 im building some speaker boxes (6x9) and some kick panels (61/2) ive got the speaker boxes done i still like one more kick panel i will post some pics as soon as i get the kick panel done and get the rest of my carpet in __________________ Gage 1967 C10 Shortbed Stepside

04-29-2009, 11:28 AM	#25
dolphman88 DDOV Join Date: Sep 2008 Location: North Wilkesboro, NC Posts: 210	Re: my 64 hey.. truck looks and sounds good.. but im guessin you still want street power... i know it doesnt matter when the cutouts are open, but when they arent, you lose power by having ur mufflers too close to your headers.. your supposed to move them as far away from them as you can... just my .02 __________________ If you don't like the way I drive, stay off the sidewalk http://67-72chevytrucks.com/vboard/s...d.php?t=317070 The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

Register or Log In To remove these advertisements.