MN Parting 67 GMC C1500 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chewychevy67 · 05-23-2014, 07:27 AM

On the factory rug there should be a foot heal pad on the driver side sewn on. If the rug is trashed would you sell it seperate from it? Is it wore thru? Could you post pic's of it. Also is the 4 row rad auto or std tranny? Original harrison rad? Any damage? Rod.

CATCHALLBLUE · 05-23-2014, 07:57 AM

Ill take it VW. and yes im in the the CONUS, SC to be exact.

Do we go through pp? I guess PM me with details. THANK YOU!

**jmader** · 05-23-2014, 08:56 AM

Can I get a pic of the grille? Shipping quote to 68803?

**jmader** · 05-23-2014, 09:01 AM

Wow somehow I blew right across the grille pic. I'll take it shipped to 68803. Also looking for a good drivers side door relay.

muckmuck · 05-23-2014, 10:06 AM

Quote:

Originally Posted by Vintage Windmills

Let me check out the pedals tomorrow, sounds good on the wheel and we'll see what the other gentleman decides on the bezels.

Jud

I will pass the headlight bezels on to you.

Vintage.... Do you happen to know which carb it is?

**Cash3481** · 05-23-2014, 10:08 AM

Quote:

Originally Posted by Vintage Windmills

Hi Mike, its a v6 fan shroud I'm pretty sure. P/N is in the one photo. Nice except for worn through area on one side.

$49 shipped or if its cool with Randy and you, I could leave at his place for $25

Jud,
Ill pass on the fan shroud to apache67.
Thanks for the pics.
Mike

Vintage Windmills · 05-23-2014, 03:28 PM

All, here we go, let me know if I missed anyone's questions.

Quote:

Originally Posted by Mr.chivo

Jud, does the glovebox have the "GMC" plastic emblem on it? How much for the door panel chrome ratainers? Any 67-69 door arm and mirrors?

The plastic tab/stud on the back is broken on the emblem. Door panel retainers $30 plus shipping. I'll get some pics of mirror setups, assuming you just want the single stem style (not the big camper or w/c mirrors)?

The bezels are yours if you want them, $70 shipped

Quote:

Originally Posted by luckyss

Also, I'll take the power steering setup if it's complete. I'll need everything

Let me figure out what size of box we'll need. I will see if you need the tie bar or if this clamps on... Shipping could be from $40 to $75 i'm guessing?

Quote:

Originally Posted by luckyss

Can I buy fuel filler and gas cap? I don't care about the rest I don't have anything now but a hole in the cab I'm trying to plug until I do bodywork.

I have one in from a 70 or 72 tank if that's ok? I think this tank is still good. No charge if you are getting the PS stuff, otherwise $23 shipped.

Quote:

Originally Posted by Gary 70 Jimmy

Is that all you have is the mail ends of the seat belts you want $48.00 shipped for both seat belts and emblems

There is more there, but its a mix of some other belts, I'll get a pic. Yes on price for all

Quote:

Originally Posted by gmc 2500 4x4

i will take the 3 lower after market gauges 14063

$29 shipped

Quote:

Originally Posted by Apache67

I pmd you last night on the radiator and fan shroud plus right front fender. Thanks

See pics above on shroud and below on rad, you're up on both.

Quote:

Originally Posted by chewychevy67

On the factory rug there should be a foot heal pad on the driver side sewn on. If the rug is trashed would you sell it seperate from it? Is it wore thru? Could you post pic's of it. Also is the 4 row rad auto or std tranny? Original harrison rad? Any damage? Rod.

I will check on heel pad. Original Harrison for auto tranny, no damage that indicates it will leak. Looks fairly good on the inside too. I'm not sure it doesn't need a pinhole or something fixed but PO was going to run it with the replacement 350 so decent chace its good or fixable. See pics below.

Quote:

Originally Posted by CATCHALLBLUE

Ill take it VW. and yes im in the the CONUS, SC to be exact.

Do we go through pp? I guess PM me with details. THANK YOU!

payment received, thanks.

Quote:

Originally Posted by jmader

Wow somehow I blew right across the grille pic. I'll take it shipped to 68803. Also looking for a good drivers side door relay.

If you would be willing to meet me around Omaha next weekend, you can save the shipping costs. Probably be around $50 to ship it there? What do you mean by driver relay? The mechanism inside the door that the inside handle attaches to?

Quote:

Originally Posted by muckmuck

I will pass the headlight bezels on to you.

Vintage.... Do you happen to know which carb it is?

Electric choke model, do you need numbers?

Quote:

Originally Posted by Cash3481

Jud,
Ill pass on the fan shroud to apache67.
Thanks for the pics.
Mike

No worries Mike.

Quote:

Originally Posted by 75gmc454

I can see the bracket for the buddy bucket console above the sending unit. My gmc may need that.
Also on the a/c lines. Everything that goes on the rear of the compressor is missing off of my truck.
Also does it have the parking brake handle cover?

Clint, I'll get some pics of the AC hoses and the bucket seat cab brace, and look at parking brake handle cover too.

luckyss · 05-23-2014, 03:45 PM

So, I just want to double check cause im not sure what ram assist is now that I just re-read that, but is this a complete power steering setup with ram assist? I am really just looking to convert my 72 to Power Steering if you have the set up for me to do that, ill take it pending shipping costs.

Def going to take the filler neck form the 70-72 either way. Does it have a gas cap too?

drbeeper17 · 05-23-2014, 03:45 PM

I'd be really interested in the right (passenger) fender if Apache passes. Possibly also the hood. I would require shipping to 92109, so that may price me out. But if you are just looking to unload the front end parts, I'm sure we could work something out. Thanks.

Vintage Windmills · 05-23-2014, 03:53 PM

Quote:

Originally Posted by luckyss

So, I just want to double check cause im not sure what ram assist is now that I just re-read that, but is this a complete power steering setup with ram assist? I am really just looking to convert my 72 to Power Steering if you have the set up for me to do that, ill take it pending shipping costs.

Def going to take the filler neck form the 70-72 either way. Does it have a gas cap too?

The ram assist is like the old corvettes in that theres a hydraulic clinder that pushes on the tie bar. For a 72, you want a regular PS pump and box, that's all I think you need. I have a PS box off a 72 C20 but not sure on the pump. $70 shipped total on the box.

Quote:

Originally Posted by drbeeper17

I'd be really interested in the right (passenger) fender if Apache passes. Possibly also the hood. I would require shipping to 92109, so that may price me out. But if you are just looking to unload the front end parts, I'm sure we could work something out. Thanks.

Sorry I don't ship hoods or fenders. MN is gorgeous right now, all abloom and the birds are chirping and dancing- take a road trip!

Apache67 · 05-23-2014, 04:20 PM

I appreciate your time, I'm going to have to pass also. Thanks, wish you were closer myself!!

**gmc 2500 4x4** · 05-23-2014, 04:22 PM

$29 shipped on gauges, i'll take

**michael bustamante** · 05-23-2014, 05:41 PM

Whay kind of shape is that tach in? How about the fenders?

Vintage Windmills · 05-23-2014, 07:08 PM

Quote:

Originally Posted by luckyss

Def going to take the filler neck form the 70-72 either way. Does it have a gas cap too?

Yep, I can include this one, its not great but may be usable.

Quote:

Originally Posted by Apache67

I appreciate your time, I'm going to have to pass also. Thanks, wish you were closer myself!!

Yep, no worries.

Quote:

Originally Posted by gmc 2500 4x4

$29 shipped on gauges, i'll take

PM sent

Quote:

Originally Posted by michael bustamante

Whay kind of shape is that tach in? How about the fenders?

Tach is maybe junk, I think the lens is broke and I don't know if it works or not. Sorry not shipping fenders.

chewychevy67 · 05-23-2014, 07:34 PM

How much are you asking for the rad? shipping to S0K2T0 in Canada USPS? Rod

Vintage Windmills · 05-23-2014, 10:47 PM

A few more pics in a little bit guys, got the truck mostly broken down tonight, stuff is loose now.

Quote:

Originally Posted by chewychevy67

How much are you asking for the rad? shipping to S0K2T0 in Canada USPS? Rod

Radiator price was on page 1, let me check on shipping.

luckyss · 05-23-2014, 11:18 PM

I'll pass on the power steering if it's not complete but will still take the filler neck. Pm me payment info

muckmuck · 05-23-2014, 11:43 PM

$40 shipped for the carb?

chewychevy67 · 05-24-2014, 12:25 AM

Quote:

Originally Posted by Vintage Windmills

A few more pics in a little bit guys, got the truck mostly broken down tonight, stuff is loose now.

Radiator price was on page 1, let me check on shipping.

I have read the thread over thre times and cant find a price of the rad. Just someone pm'd you bout it.

waylonbud · 05-24-2014, 08:57 AM

Hello, If this cab is still available, I am in need of one. I have family and friends all over central south east MN, but I dont when I could get a person over there to pick it up because of holiday weekend. If you have to scrap it and get it out of your way I understand.
Thanks, Waylon

Vintage Windmills · 05-24-2014, 09:04 AM

Quote:

Originally Posted by luckyss

I'll pass on the power steering if it's not complete but will still take the filler neck. Pm me payment info

PM sent

Quote:

Originally Posted by muckmuck

$40 shipped for the carb?

Yes sir

Quote:

Originally Posted by chewychevy67

I have read the thread over thre times and cant find a price of the rad. Just someone pm'd you bout it.

Sorry about that, working fast here to get stuff done, I told him $100 shipped but he was in the US, let me look into shipping if you are still interested.

Quote:

Originally Posted by waylonbud

Hello, If this cab is still available, I am in need of one. I have family and friends all over central south east MN, but I dont when I could get a person over there to pick it up because of holiday weekend. If you have to scrap it and get it out of your way I understand.
Thanks, Waylon

I could hold it for you with some payment.

Vintage Windmills · 05-24-2014, 09:08 AM

pics. Anyone need better pics of anything?

I will shoot some of the radiator and the AC hoses.

chewychevy67 · 05-24-2014, 09:49 AM

Still interested if shipping isnt too bad.

Mr.chivo · 05-24-2014, 10:45 AM

The plastic tab/stud on the back is broken on the emblem. Door panel retainers $30 plus shipping. I'll get some pics of mirror setups, assuming you just want the single stem style (not the big camper or w/c mirrors)?

The bezels are yours if you want them, $70 shipped

I will pass on glovedoor,bezels and ratainers, Still very interested in the 67-69 single stem style mirror setups pending pics and price.

waylonbud · 05-24-2014, 11:16 AM

If you can hold it for me that would be great. Thank you and sending you a pm.
Waylon.

05-23-2014, 07:27 AM	#26
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,537	Re: Parting 67 GMC C1500 On the factory rug there should be a foot heal pad on the driver side sewn on. If the rug is trashed would you sell it seperate from it? Is it wore thru? Could you post pic's of it. Also is the 4 row rad auto or std tranny? Original harrison rad? Any damage? Rod.

05-23-2014, 07:57 AM	#27
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Re: Parting 67 GMC C1500 Ill take it VW. and yes im in the the CONUS, SC to be exact. Do we go through pp? I guess PM me with details. THANK YOU!

05-23-2014, 08:56 AM	#28
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting 67 GMC C1500 Can I get a pic of the grille? Shipping quote to 68803? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

05-23-2014, 09:01 AM	#29
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting 67 GMC C1500 Wow somehow I blew right across the grille pic. I'll take it shipped to 68803. Also looking for a good drivers side door relay. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

05-23-2014, 03:45 PM	#33
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 67 GMC C1500 So, I just want to double check cause im not sure what ram assist is now that I just re-read that, but is this a complete power steering setup with ram assist? I am really just looking to convert my 72 to Power Steering if you have the set up for me to do that, ill take it pending shipping costs. Def going to take the filler neck form the 70-72 either way. Does it have a gas cap too?

05-23-2014, 03:45 PM	#34
drbeeper17 Registered User Join Date: Feb 2013 Location: San Diego Posts: 21	Re: Parting 67 GMC C1500 I'd be really interested in the right (passenger) fender if Apache passes. Possibly also the hood. I would require shipping to 92109, so that may price me out. But if you are just looking to unload the front end parts, I'm sure we could work something out. Thanks.

05-23-2014, 04:20 PM	#36
Apache67 Registered User Join Date: Apr 2014 Location: Ozark AL Posts: 19	Re: Parting 67 GMC C1500 I appreciate your time, I'm going to have to pass also. Thanks, wish you were closer myself!!

05-23-2014, 04:22 PM	#37
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,959	Re: Parting 67 GMC C1500 $29 shipped on gauges, i'll take

05-23-2014, 05:41 PM	#38
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Parting 67 GMC C1500 Whay kind of shape is that tach in? How about the fenders? __________________ 1967custom

05-23-2014, 07:34 PM	#40
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,537	Re: Parting 67 GMC C1500 How much are you asking for the rad? shipping to S0K2T0 in Canada USPS? Rod Last edited by chewychevy67; 05-23-2014 at 08:24 PM.

05-23-2014, 11:18 PM	#42
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 67 GMC C1500 I'll pass on the power steering if it's not complete but will still take the filler neck. Pm me payment info

05-23-2014, 11:43 PM	#43
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: Parting 67 GMC C1500 $40 shipped for the carb?

05-24-2014, 08:57 AM	#45
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Parting 67 GMC C1500 Hello, If this cab is still available, I am in need of one. I have family and friends all over central south east MN, but I dont when I could get a person over there to pick it up because of holiday weekend. If you have to scrap it and get it out of your way I understand. Thanks, Waylon

05-24-2014, 09:08 AM	#47
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 67 GMC C1500 pics. Anyone need better pics of anything? I will shoot some of the radiator and the AC hoses. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-24-2014, 09:49 AM	#48
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,537	Re: Parting 67 GMC C1500 Still interested if shipping isnt too bad.



Register or Log In To remove these advertisements.

05-24-2014, 10:45 AM	#49
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting 67 GMC C1500 The plastic tab/stud on the back is broken on the emblem. Door panel retainers $30 plus shipping. I'll get some pics of mirror setups, assuming you just want the single stem style (not the big camper or w/c mirrors)? The bezels are yours if you want them, $70 shipped I will pass on glovedoor,bezels and ratainers, Still very interested in the 67-69 single stem style mirror setups pending pics and price.

05-24-2014, 11:16 AM	#50
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Parting 67 GMC C1500 If you can hold it for me that would be great. Thank you and sending you a pm. Waylon.

Register or Log In To remove these advertisements.