Lets see yer cup holders! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sn33kyp3t3 · 05-13-2014, 06:20 PM

Quote:

Originally Posted by tinyjaime

This is not my truck but the cup holders looked cool.

http://i532.photobucket.com/albums/e...11_1622281.jpg

Aw damn! That just gave me an idea. Gonna go see if I can scrounge up some intake stacks...Thanks buddy.

_Ogre · 05-13-2014, 07:19 PM

Quote:

Originally Posted by Donaldo

I'm pretty sure that was Duck Tape....

UncaDonald

duct tape: as for sealing air leaks in heating/cooling duct has been around for decades.
duck tape is a new redneck hillbilly brand that i will never buy because of it's silly name
sort of like i never say yall, cmon, gosh dern, dern tootin, fixin... ect (no ogre smiley face needed)

OrrieG · 05-13-2014, 07:43 PM

Quote:

Originally Posted by tinyjaime

This is not my truck but the cup holders looked cool.

http://i532.photobucket.com/albums/e...11_1622281.jpg

I'm digging the Monkey Ward under dash AC, when I was in AZ in the 70's I put a 60's Sears unit in my truck.

The good duct tape has the ASTM standard listed on the inside of the roll and sticks like crazy, unlike the cheap stuff. Same with electrical tape (UL listed), and tie (bailing) wire.

Highsider · 05-13-2014, 08:16 PM

Quote:

Originally Posted by tinyjaime

This is not my truck but the cup holders looked cool.

http://i532.photobucket.com/albums/e...11_1622281.jpg

New winner!

LSXapache · 05-13-2014, 09:26 PM

My girls thighs...ftw

LUCKIN-FOU · 05-13-2014, 11:28 PM

So I built this cup holder for a friend's 1985 Kennworth. It mounts by the passenger seat.

Donaldo · 05-14-2014, 12:23 AM

""duct tape: as for sealing air leaks in heating/cooling duct has been around for decades.
duck tape is a new redneck hillbilly brand that i will never buy because of it's silly name""

Not so new here in the Okie coast of Central CA - it's been around here for decades also - ever since some oky from Bakerfield mispronounced it - but it works as good as any 250 mph tape, it's just marketing.

I think Ford is a silly name - it's a shallow place to cross a river ....

gearhead2069 · 05-14-2014, 12:55 AM

Wish I could claim this one as my truck but it isn't. This is the ICON Thriftmaster. I saw these cup holder and freaking fell in love! Apparently this are out of a Mercedes G-wagon according to his video. This is the BEST idea I have ever seen! The are minimal and flip down when you aren't using them! Awesome idea!

Jyman · 05-14-2014, 11:22 PM

if they flip down when your not using them, wouldn't they flip down when you have something in them also. I would have thought they should flip up when your not using them.

Quote:

Originally Posted by gearhead2069

Wish I could claim this one as my truck but it isn't. This is the ICON Thriftmaster. I saw these cup holder and freaking fell in love! Apparently this are out of a Mercedes G-wagon according to his video. This is the BEST idea I have ever seen! The are minimal and flip down when you aren't using them! Awesome idea!

OrrieG · 05-15-2014, 01:07 AM

Quote:

Originally Posted by LSXapache

My girls thighs...ftw

WE need photographic proof....

gearhead2069 · 05-15-2014, 02:48 AM

Jyman,

I don't believe so. If you think about it, even if they weren't strong enough to hold up the cup, as soon as it gave way the bottom of the cup would simply rest agains the kick panel (where these were located) and it would act as a cradle holding the cup in place.

DransportGarage · 05-15-2014, 03:33 AM

Here's an entire world of cup holders, including that Mercedes G-Class net thingy...

https://www.google.com/search?q=net+...QEwAA#imgdii=_

70gmcjimmy · 05-15-2014, 07:43 PM

Here's mine.

DAC

sn33kyp3t3 · 05-16-2014, 12:23 AM

Quote:

Originally Posted by 70gmcjimmy

Here's mine.

DAC

Does it date me to say that I remember those? Haha! You got a window tray to go with the cup holder?

1project2many · 05-16-2014, 08:01 AM

Quote:

Originally Posted by 70gmcjimmy

Here's mine.

DAC

I like the contrast made by the audio system, with 20-30 functions, and the heater, " Off-Hi "

OrrieG · 05-16-2014, 01:18 PM

Quote:

Originally Posted by 1project2many

I like the contrast made by the audio system, with 20-30 functions, and the heater, " Off-Hi "

And in the good old days there would not have been a radio, had to be a good whistler.

Who would have thought a simple question would garner 40 responses???

70gmcjimmy · 05-16-2014, 08:33 PM

Quote:

Originally Posted by sn33kyp3t3

Does it date me to say that I remember those? Haha! You got a window tray to go with the cup holder?

Yeah I imagine so! I would love to have a window tray too. As you know these are supposed to hang on the door, but I wanted to put is where it wasn't subject to opening and closing the door with a beverage in it. That spot worked best and I can reach it fine. Guess I could have cleaned the coffee stains off for the pic!

Quote:

Originally Posted by 1project2many

I like the contrast made by the audio system, with 20-30 functions, and the heater, " Off-Hi "

Never thought about that! Someone had butchered the radio hole before I got the truck so the only thing that would fit was a CD player/radio. Hole was too big for a stock delete plate too. The heater is fancier than what you can see in that pic so here's another view--LOL! Unfortunately I still have to use it every day. Come on summer!

Thanks---DAC

AK56 · 05-18-2014, 12:42 PM

Quote:

Originally Posted by LUCKIN-FOU

So I built this cup holder for a friend's 1985 Kennworth. It mounts by the passenger seat.

I could have used one of those when I was driving the haul road to Prudhoe Bay back in the day. BTW I've enjoyed your work on TV. Keep it up!

_Ogre · 05-21-2014, 02:17 PM

Quote:

Originally Posted by LSXapache

My girls thighs...ftw

Quote:

Originally Posted by OrrieG

WE need photographic proof....

agreed. photos or it never happened

Old Crow · 05-21-2014, 03:32 PM

Quote:

Originally Posted by _Ogre

duct tape: as for sealing air leaks in heating/cooling duct has been around for decades.
duck tape is a new redneck hillbilly brand that i will never buy because of it's silly name
sort of like i never say yall, cmon, gosh dern, dern tootin, fixin... ect (no ogre smiley face needed)

Ogre, you're a Yankee, you don't qualify to use any of those words anyway. That's more for the part of the country I live in.

Matt_50 · 02-25-2018, 11:38 PM

I know his is an old thread but have any of you guys made one that slides into the hole for the ashtray? Bought one from a catalog for my c10, worked out pretty well.

Khaus · 09-22-2020, 09:23 AM

Have these simple bolt on option available for all years from 1947 to 1987. Laser cut stainless steel plate with generic poker table style stainless steel cup holders.

WWW.LS-FAB.COM

_Ogre · 09-22-2020, 03:40 PM

Quote:

Originally Posted by Khaus

Have these simple bolt on option available for all years from 1947 to 1987. Laser cut stainless steel plate with generic poker table style stainless steel cup holders.

WWW.LS-FAB.COM

khaus, you have some great products and i see you've upgraded to gold vendor
you add nothing to the conversation when pulling up old threads just to hawk your product
wrong behavior for this forum imo

Khaus · 09-22-2020, 04:05 PM

Add nothing to the conversation? I am adding a new option that wasn't available at the time the thread originated. I understand if they might not be for you but I feel like they are directly applicable to the conversation and wanted to make those commenting aware of them.

**mr48chev** · 09-22-2020, 08:00 PM

60.00 Bucks for cup holders might be a real stretch for a lot of guys in this group. Not that they don't spend money on their trucks but for most of us trinkets like that are not on the list and we will make do or fab out of what ever is kicking around the shop.

For me it doesn't really matter as they don't fit my build plan for my truck.

05-13-2014, 09:26 PM	#30
LSXapache Registered User Join Date: Jan 2014 Location: Eastman GA Posts: 64	Re: Lets see yer cup holders! My girls thighs...ftw __________________ '59 chevy apache: camaro clip, LQ4 with 5.3l 799 heads, Vengeance Racing tune, LTs, CAI, 4l60e, 8.5" ten bolt w/ truetrac

05-13-2014, 11:28 PM	#31
LUCKIN-FOU I'M NOT SCARED I HAVE A PLASMA Join Date: Feb 2008 Location: The PLACE Posts: 172	Re: Lets see yer cup holders! So I built this cup holder for a friend's 1985 Kennworth. It mounts by the passenger seat. __________________ Lou Santiago US Navy Retired/World Traveler Car Builder/Welder/Airport Investigator garageinsidertv.com [FORUM] WORK IS FOR PEOPLE WHO CAN'T FISH. I GUESS I'M SCREWED BECAUSED I HATE FISHING.

05-14-2014, 12:23 AM	#32
Donaldo Registered User Join Date: Sep 2013 Location: Morro Bay, California Posts: 447	Re: Lets see yer cup holders! ""duct tape: as for sealing air leaks in heating/cooling duct has been around for decades. duck tape is a new redneck hillbilly brand that i will never buy because of it's silly name"" Not so new here in the Okie coast of Central CA - it's been around here for decades also - ever since some oky from Bakerfield mispronounced it - but it works as good as any 250 mph tape, it's just marketing. I think Ford is a silly name - it's a shallow place to cross a river .... __________________ Thanks, Don http://www.donsbirds.com/pick-up

05-14-2014, 12:55 AM	#33
gearhead2069 Registered User Join Date: Apr 2014 Location: Lascassas, TN Posts: 78	Re: Lets see yer cup holders! Wish I could claim this one as my truck but it isn't. This is the ICON Thriftmaster. I saw these cup holder and freaking fell in love! Apparently this are out of a Mercedes G-wagon according to his video. This is the BEST idea I have ever seen! The are minimal and flip down when you aren't using them! Awesome idea!

05-15-2014, 02:48 AM	#36
gearhead2069 Registered User Join Date: Apr 2014 Location: Lascassas, TN Posts: 78	Re: Lets see yer cup holders! Jyman, I don't believe so. If you think about it, even if they weren't strong enough to hold up the cup, as soon as it gave way the bottom of the cup would simply rest agains the kick panel (where these were located) and it would act as a cradle holding the cup in place.

05-15-2014, 03:33 AM	#37
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: Lets see yer cup holders! Here's an entire world of cup holders, including that Mercedes G-Class net thingy... https://www.google.com/search?q=net+...QEwAA#imgdii=_ __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

05-15-2014, 07:43 PM	#38
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: Lets see yer cup holders! Here's mine. DAC Attached Images __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

02-25-2018, 11:38 PM	#46
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Lets see yer cup holders! I know his is an old thread but have any of you guys made one that slides into the hole for the ashtray? Bought one from a catalog for my c10, worked out pretty well. __________________ 1950 Build

09-22-2020, 09:23 AM	#47
Khaus Registered User Join Date: Sep 2017 Location: Calgary Alberta Posts: 27	Re: Lets see yer cup holders! Have these simple bolt on option available for all years from 1947 to 1987. Laser cut stainless steel plate with generic poker table style stainless steel cup holders. WWW.LS-FAB.COM Attached Images

09-22-2020, 04:05 PM	#49
Khaus Registered User Join Date: Sep 2017 Location: Calgary Alberta Posts: 27	Re: Lets see yer cup holders! Add nothing to the conversation? I am adding a new option that wasn't available at the time the thread originated. I understand if they might not be for you but I feel like they are directly applicable to the conversation and wanted to make those commenting aware of them.

09-22-2020, 08:00 PM	#50
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,660	Re: Lets see yer cup holders! 60.00 Bucks for cup holders might be a real stretch for a lot of guys in this group. Not that they don't spend money on their trucks but for most of us trinkets like that are not on the list and we will make do or fab out of what ever is kicking around the shop. For me it doesn't really matter as they don't fit my build plan for my truck. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.