Moby: My Chevy 4x4 ls swap

[bohmankid]

Originally Posted by hardcore4life

Is that LS Prius your brain child or someone else's?

Someone else's. I found it on one of my web surfs.

Originally Posted by Greenlee

Looks like you are making some good progress. That white under the hood makes it look nice and clean

Thank you! The white really sets the motor off.

Originally Posted by y5mgisi

Subscribed! For the computer mount, mount it on the inner fender. Use the $12 ebay mounts. Search, ls1 computer bracjet".

Thanks. I'll search for one and see if I like it.

Originally Posted by Hankster

Looks good, I've seen worse looking rims on the road before! Keep up the good work.

Well I decided to scrap the rims anyway. I'll just get new ones.

Originally Posted by quadzero

You are already off to a great start. Loved your last WIP. The frame is excellent, perfect home for the LS. I was curious, how cold does it get there cause until it is spring time I'm not doing much outside except for shoveling snow. And thanks to Hankster for the link.

Thanks! It gets pretty cold here. But It also gets pretty hot. As you can see from my post dates I didn't do anything all winter cuz it was anywhere from 5-30 degrees F these past Winter months. It was over 80 today though.

Originally Posted by Big Rat

Sooooooo, anything new?

I've been finishing up this truck slowly. Buttoning up stuff and putting all the little things on. Here are a few engine bay shots.




Also, I want to make 2 containers or trays for the fuse block that I built and for the computer sitting on the inner fender. Do you guys suggest anything I could use or build to put these things in/on? Thanks Y5, I'll check out your recommendation as well.

[bohmankid]

One more picture

[Greenlee]

Looks good! Looks like you are almost done.

[Hankster]

Anymore on Moby?

[bohmankid]

Originally Posted by Greenlee

Looks good! Looks like you are almost done.

Unfortunately I'm far from done, my friend.

I decided to take the truck in a different direction. I'm not completely done working out the bugs of the motor swap yet, but I'm starting something new on this truck while I finish all the little things.

Any guesses what I'm doing?

[bohmankid]

Let me just say I sure do wish I had a lift.. or a big enough garage..

[franky69c10]

What are you using for the wire harness to start the engine, after market or did you do it your self

[bohmankid]

Originally Posted by franky69c10

What are you using for the wire harness to start the engine, after market or did you do it your self

Stock, re-worked harness. I spliced it into the truck and made the fuse block myself. I sent the computer to Brendan at lt1swap.com to turn off emission stuff, adjust fan settings and turn off the electronic transmission to turn it into a standalone harness for the engine. I kept the transmission connectors on the harness though because I plan on putting in an overdrive in the future. I've been thinking about buying an aftermarket harness. But I haven't justified the prices they're going for yet.

[bohmankid]

Installed a 6 inch Super lift on the front. Also coated the front axle in por15.
Check out the difference in arch between the stock spring and the 6" Super lift spring. I'm in need of oversized mud terrains now..

[Greenlee]

What's your plans? Looked like it was going to be a dually in one of your pictures!

[Hankster]

Looks good with that lift! You should do it up Cali style with some 15x12 and some 33s with that lift..

[NorCalAnthony]

Any updates on Moby? Your truck looks great so far

[bohmankid]

I got the bed back on and put all the new shocks on except for one in the rear because the mount to the frame broke! Does anyone know where I can get a new shock mount? Autozone/O'Reilly both failed me. Figures.

Anyway, now that this lift is on, I need help picking out wheels and tires! Here's a few examples chrome or black??

[y5mgisi]

If you must do rock stars, i vote black.

[bohmankid]

Originally Posted by y5mgisi

If you must do rock stars, i vote black.

They were the easiest images to photoshop haha. I probably won't go with this specific wheel, just having some fun!
Looks good though

[bohmankid]

Originally Posted by bohmankid

I got the bed back on and put all the new shocks on except for one in the rear because the mount to the frame broke! Does anyone know where I can get a new shock mount? Autozone/O'Reilly both failed me

By the way, I got that rear shock mount from Napa.

[bohmankid]

Here are a few vids of my avi gmc i took way back when i was the ignorant age of 18! Enjoy

86 GMC Truck Walkaround - YouTube

[bohmankid]

I drove Moby around last night and that 5.3 sure is peppy! Just like I remember it. Still have to work out a few bugs and wire a few more things up. And the truck wanders pretty bad on the road. Also needs an alignment because my steering wheel is upside down, my right turns are wide and it will turn left on a dime. I put the wheels off Bear on Moby just for fun to see what it would look like.

[tip]

Nice truck!!! Love the 5.3 swap.

One question. Your black trim along the lower sides of the truck, is that stock? I'm trying to find an alternative to that stick on chrome LMC stuff, and I haven't seen straight black before.

[Nathanz]

love the truck, i am helping a friend redo a 84 chevy 3/4 ton 4x4 truck and we are putting a LQ9 in it. was curious about the long tubes u bought, if you don't mind could u tell me the part number or the specs on them, brand, out let size, ect.. u seem to be the only person i have seen put long tubes on a build like this and it sounds like a good way to go. thanks for your time

[bohmankid]

Originally Posted by tip

Nice truck!!! Love the 5.3 swap.

One question. Your black trim along the lower sides of the truck, is that stock? I'm trying to find an alternative to that stick on chrome LMC stuff, and I haven't seen straight black before.

Thank you. The black trim is not stock. The guy who owned this truck before me stuck it on and I have no idea where he got it. A quick Google search brought up some results for me though, keep looking my friend. Click here and here for links I found with similar black molding.

Originally Posted by Nathanz

love the truck, i am helping a friend redo a 84 chevy 3/4 ton 4x4 truck and we are putting a LQ9 in it. was curious about the long tubes u bought, if you don't mind could u tell me the part number or the specs on them, brand, out let size, ect.. u seem to be the only person i have seen put long tubes on a build like this and it sounds like a good way to go. thanks for your time

The long tubes in my truck are cheap ebay stainless headers meant to go in a 2010 ls3 camaro. I got them because they were the cheapest longtubes I could find that tucked in real well. It's a 2.5" collector but I was planning on running a 3" exhaust and just using a 2.5 to 3 inch adapter. There was slight frame trimming that had to be done, not a ton though and I don't think it hurt the structural integrity of my frame at all. My other build thread shows more pics and info, check it out here on post #16.

[tip]

Originally Posted by bohmankid

Thank you. The black trim is not stock. The guy who owned this truck before me stuck it on and I have no idea where he got it. A quick Google search brought up some results for me though, keep looking my friend. Click here and here for links I found with similar black molding

Thanks, didn't even think about getting a universal stick on trim.

[bohmankid]

Went to oreilly for some brake pads, came out and truck wont start. No fuel pressure because the fuel pump sending unit fried (bad wiring, 20 year old sending unit). O'Reilly ordered a new one for me which took a day, so the truck spent the night there. I opted to pull the bed back instead of dropping the tank. Funny story, crap weekend.



Had to cheer myself up. New wheels and 35 x 12.5 inch tires. Can't go wrong with bfg all terrains.

[mitch_04]

Looks great!

[324matt]

Good Job! Love the pics!!!