CA 1971 GMC BB Complete Part Out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 12-15-2013, 12:11 PM

Let me gut the interior and I will get more detailed pics for you...

Quote:

Originally Posted by catch2otwo

overall condition of the cab? Floors, rockers, corners etc? Rotted? Solid? price? Thanks

badazmalibu · 12-15-2013, 01:41 PM

Is there any good passenger side trim for sale on the 68 chevy behind it?

JimmyBonz · 12-15-2013, 02:17 PM

IF this truck has the "EATON" Rear-End, I could Really use the Center Section!!!!
See it's a 4.10 so Let ME Hear from You PLEASE?????????????
Jimmy

budnikguy · 12-24-2013, 02:43 AM

Pulled the diff cover...and has original 410...pics for ya

Quote:

Originally Posted by JimmyBonz

IF this truck has the "EATON" Rear-End, I could Really use the Center Section!!!!
See it's a 4.10 so Let ME Hear from You PLEASE?????????????
Jimmy

ralphie628 · 12-15-2013, 09:31 PM

How much for the windshield?

**tidmack** · 12-15-2013, 09:44 PM

I too would be interested in the cruise control bracket on the driver's side inner fender. Just the bracket is desired.

I'm also interested in the stainless windshield wiper blade holders if they're Trico's and usable. I am not in need of the entire wiper arm, just the holders that the blades slide into. Shipping would be to 53154. Thanks.

Jeff

rich69 · 12-16-2013, 10:37 AM

right eyebrow in good shape if so how much

myyamr7 · 12-16-2013, 11:00 PM

How much for the big block motor mounts and stands shipped to 02825?
Thanks

myyamr7 · 12-17-2013, 11:30 PM

Quote:

Originally Posted by myyamr7

How much for the big block motor mounts and stands shipped to 02825?
Thanks

Are these available?

ajgriffin · 12-18-2013, 08:10 PM

Put me in line for pedal to carb

ajgriffin · 12-21-2013, 03:33 AM

Quote:

Originally Posted by ajgriffin

Put me in line for pedal to carb

Gas pedal still available?

VDOG · 04-18-2014, 01:16 PM

What does that cab look like, rockers, floor, etc etc.

budnikguy · 04-18-2014, 10:49 PM

This cab is pretty ok....have better and have worse...

Quote:

Originally Posted by VDOG

What does that cab look like, rockers, floor, etc etc.

franken · 12-14-2013, 09:01 PM

If the cab doesn't sell, I'd be interested in the radio area of the dash to patch my hacked out radio knob holes...

Price?

No doubt I'll lose the thread, so PM me if desired.

Pmarti69 · 12-14-2013, 09:03 PM

how much for the factory tranny mount bolts to engine, but only factory. And starter bolts shipped to 77345

,thanks paul

budnikguy · 12-15-2013, 12:13 PM

I will want to keep it bolted all together, motor tans at least until pulled from the truck...so, if you can be patient I could offer those at that point if your time frame allows...

Quote:

Originally Posted by Pmarti69

how much for the factory tranny mount bolts to engine, but only factory. And starter bolts shipped to 77345

,thanks paul

Pmarti69 · 12-15-2013, 05:38 PM

No prob, I understand, no time limit, I am gathering everything I will need. Just let me know. Also when you get to it the front core support status. Thanks I will be monitoring.

thanks paul

Quote:

Originally Posted by budnikguy

I will want to keep it bolted all together, motor tans at least until pulled from the truck...so, if you can be patient I could offer those at that point if your time frame allows...

**88JRFAN** · 12-14-2013, 09:44 PM

How much for the tranny downshift parts? Thanks, Daren

budnikguy · 12-15-2013, 12:17 PM

huh?

Quote:

Originally Posted by 88JRFAN

How much for the tranny downshift parts? Thanks, Daren

budnikguy · 12-17-2013, 07:21 PM

Kick down wiring was bad in a few spots...here are some pics

Quote:

Originally Posted by 88JRFAN

How much for the tranny downshift parts? Thanks, Daren

John Pasinski · 12-17-2013, 07:48 PM

I'd like to jump in second to 70shortfleet for the heat stove. Thanks for mentioning the slider. Waiting to hear about that, along with the antenna.
Take your time, no hurry.

**70shortfleet** · 12-17-2013, 08:42 PM

Quote:

Originally Posted by John Pasinski

I'd like to jump in second to 70shortfleet for the heat stove. Thanks for mentioning the slider. Waiting to hear about that, along with the antenna.
Take your time, no hurry.

It is yours, I will pass on the heat shield, thanks

ZEKE68 · 12-17-2013, 09:24 PM

Did you ever round up a set of exhaust manifolds from a 68-72 big block truck?

John Pasinski · 12-18-2013, 04:25 AM

Quote:

Originally Posted by 70shortfleet

It is yours, I will pass on the heat shield, thanks

Thank you sir. I will take it.
BUDNIKGUY; Can I wait to hear on the other parts before pmnt?

budnikguy · 12-17-2013, 09:37 PM

You are up on the heat stove...give me till the weekend and I will get the other items removed and pics posted.

Quote:

Originally Posted by John Pasinski

I'd like to jump in second to 70shortfleet for the heat stove. Thanks for mentioning the slider. Waiting to hear about that, along with the antenna.
Take your time, no hurry.

12-15-2013, 01:41 PM	#2
badazmalibu Registered User Join Date: May 2013 Location: Palm City, Fl Posts: 86	Re: 1971 GMC BB Complete Part Out Is there any good passenger side trim for sale on the 68 chevy behind it?

12-15-2013, 02:17 PM	#3
JimmyBonz Registered User Join Date: Sep 2002 Location: Glenview,north of Chicago by 10 Miles Posts: 12	Re: 1971 GMC BB Complete Part Out IF this truck has the "EATON" Rear-End, I could Really use the Center Section!!!! See it's a 4.10 so Let ME Hear from You PLEASE????????????? Jimmy __________________ Jimmy Gatz

12-15-2013, 09:31 PM	#5
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: 1971 GMC BB Complete Part Out How much for the windshield?

12-15-2013, 09:44 PM	#6
tidmack Junior Member Join Date: Mar 2013 Location: Oak Creek, WI Posts: 77	Re: 1971 GMC BB Complete Part Out I too would be interested in the cruise control bracket on the driver's side inner fender. Just the bracket is desired. I'm also interested in the stainless windshield wiper blade holders if they're Trico's and usable. I am not in need of the entire wiper arm, just the holders that the blades slide into. Shipping would be to 53154. Thanks. Jeff

12-16-2013, 10:37 AM	#7
rich69 Registered User Join Date: Jun 2013 Location: BRIGEPORT Posts: 1	Re: 1971 GMC BB Complete Part Out right eyebrow in good shape if so how much

12-16-2013, 11:00 PM	#8
myyamr7 Registered User Join Date: Dec 2012 Location: Providence, RI Posts: 211	Re: 1971 GMC BB Complete Part Out How much for the big block motor mounts and stands shipped to 02825? Thanks __________________ Mark 71 C10 Cheyenne 12 Aprilia RSV4

12-18-2013, 08:10 PM	#10
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: 1971 GMC BB Complete Part Out Put me in line for pedal to carb __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

04-18-2014, 01:16 PM	#12
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: 1971 GMC BB Complete Part Out What does that cab look like, rockers, floor, etc etc.

12-14-2013, 09:01 PM	#14
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,084	Re: 1971 GMC BB Complete Part Out If the cab doesn't sell, I'd be interested in the radio area of the dash to patch my hacked out radio knob holes... Price? No doubt I'll lose the thread, so PM me if desired.

12-14-2013, 09:03 PM	#15
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 1971 GMC BB Complete Part Out how much for the factory tranny mount bolts to engine, but only factory. And starter bolts shipped to 77345 ,thanks paul __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

12-14-2013, 09:44 PM	#18
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 1971 GMC BB Complete Part Out How much for the tranny downshift parts? Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

12-17-2013, 07:48 PM	#21
John Pasinski Registered User Join Date: Aug 2007 Location: orlando Posts: 456	Re: 1971 GMC BB Complete Part Out I'd like to jump in second to 70shortfleet for the heat stove. Thanks for mentioning the slider. Waiting to hear about that, along with the antenna. Take your time, no hurry. __________________ A man's thoughts devise his ways; but it's GOD that directs his steps.

12-17-2013, 09:24 PM	#23
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: 1971 GMC BB Complete Part Out Did you ever round up a set of exhaust manifolds from a 68-72 big block truck?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.