CA Parting 3/4ton 2wd Big Block Truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Youngbuck7072 · 11-23-2010, 12:36 AM

do you have to tail light bezels? pics??

KrazyRay · 11-23-2010, 02:38 AM

Harold- I will check on switches and wire. I might have some ac screws in the hardware bin.
Adam- $68 shipped on the high hump...I have cheaper ones with holes in them.
Youngbuck- Sorry, no good bezels.

Thanks, Ray

fortytwo · 11-23-2010, 03:41 PM

Are the lower a arms the same as 67? If yes im intrested in them for lifting my 67 c10. do you have any of the other lift parts (88 lift spindals etc..).
Thanks
Ed

STOCKISH · 11-23-2010, 04:09 PM

I would be interested in a high hump cover as well as the floor section it bolts to so I can convert my small hump cab if thats possible.

**tll74** · 11-23-2010, 06:43 PM

Any intersest in selling the valve covers? Are they original GM? I have a pair of nos M/T's. Thanks, Tom

KrazyRay · 11-24-2010, 12:15 AM

Harold- $15 shipped on the switches, wire, screws.

1972SuperCheyenne- 2nd in line on high hump

tll74- I have stock BB valve covers $35 shipped

**tll74** · 11-24-2010, 01:21 AM

Are these a match to the chrome covers (loom holders, wire holders etc.) Trying to find the correct covers for a 1970. Thanks

KrazyRay · 11-24-2010, 01:34 AM

I will check Wed. I believe they came off a 71...but that was almost 20 years ago when they were pulled.

71 super · 11-24-2010, 10:14 PM

ray how do want to be paid? I can do paypal now. Sending pm thanks Harold

KrazyRay · 11-24-2010, 10:29 PM

Quote:

Originally Posted by 71 super

ray how do want to be paid? I can do paypal now. Sending pm thanks Harold

Harold, paypal is good...pm returned.
Thanks, Ray

KrazyRay · 11-24-2010, 10:31 PM

Quote:

Originally Posted by tll74

Are these a match to the chrome covers (loom holders, wire holders etc.) Trying to find the correct covers for a 1970. Thanks

I don't know if it is correct, but they came from 71-72 trucks.

KrazyRay · 11-24-2010, 10:42 PM

pics

KrazyRay · 11-24-2010, 10:46 PM

Quote:

Originally Posted by too much stuff

Ray, can you let me know when it is pulled and verify the condition? (kick down parts) I will pass on the emblems for now. Thanks. Eric

There is one cut wire on the kickdown.

**tll74** · 11-25-2010, 12:05 AM

I'll do some research to find out. Is the engine still available? Thanks

KrazyRay · 11-25-2010, 03:09 AM

Quote:

Originally Posted by tll74

I'll do some research to find out. Is the engine still available? Thanks

The engine is still available. I ran it for a long time to test it for over heating and it stays cool and runs great.
Thanks, Ray

55454 · 11-25-2010, 08:32 AM

Do you have the passenger side under cab exhaust hanger?

Thanks Tommy

tanman722001 · 11-25-2010, 11:02 AM

Quote:

Originally Posted by KrazyRay

Eric- the kick down includes switch, bracket, and wires (don't know cond.) to the trans. $40 shipped on the emblems.

Frank- I hope you enjoy the buffet of parts!

tanman- the sills were painted black

$20 shipped.

Thanks, Ray

Can you post some pics of them?Thanks Tony

**tll74** · 11-26-2010, 12:38 AM

Ray,
What does the engine come with? Such as carb, dist, ex.manifolds, flywheel, mounts, pulleys, water pump, etc. Thanks

KrazyRay · 11-26-2010, 12:58 AM

55454- sorry, no hanger

tanman- will get pics, but they look bad and the pitting shows through

tll74- long block with intake, flywheel, dist., water pump, and valve covers

Thanks, Ray

**tll74** · 11-26-2010, 01:52 AM

Hmmm....ok..so it would have the balancer, t-cover, water pump, flywheel, intake, dist w/wires, valve covers, coil, thermostat housing, and p/b vac line. Do both valve covers have the loom holder brackets for the four wire holders? (located on the inside towards the rear) Is it possible to get the stamped info off the block in front of the RH cly. head and the block cast number located LH near bell housing?

KrazyRay · 11-26-2010, 09:48 AM

Quote:

Originally Posted by tll74

Hmmm....ok..so it would have the balancer, t-cover, water pump, flywheel, intake, dist w/wires, valve covers, coil, thermostat housing, and p/b vac line. Do both valve covers have the loom holder brackets for the four wire holders? (located on the inside towards the rear) Is it possible to get the stamped info off the block in front of the RH cly. head and the block cast number located LH near bell housing?

There are some tabs on the valve covers. I think they are for the wires, but not sure. This block has been decked so the numbers are gone from the front. I will get the cast number when the cab gets pulled.
Thanks, Ray

into69z · 11-26-2010, 10:23 AM

interested in the "396" emblems are they in good shape? how much shipped to 91739 please......thanks Steve

KrazyRay · 11-26-2010, 12:43 PM

Quote:

Originally Posted by into69z

interested in the "396" emblems are they in good shape? how much shipped to 91739 please......thanks Steve

They are in good shape. I will check studs when I pull them from the fenders. $40 shipped if the studs are good.
Thanks, Ray

KrazyRay · 11-26-2010, 02:35 PM

Pics of High Hump. There are approx. 5 screw holes (see pics) and residual glue from the carpet. Other than that, it is in great shape.

KrazyRay · 11-29-2010, 10:35 AM

Quote:

Originally Posted by 1972SuperCheyenne

I would be interested in a high hump cover as well as the floor section it bolts to so I can convert my small hump cab if thats possible.

1972SuperCheyenne- you're up on the high hump. How much floor do you need?
Thanks, Ray

11-23-2010, 12:36 AM	#26
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Parting 3/4ton 2wd Big Block Truck do you have to tail light bezels? pics?? __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-23-2010, 02:38 AM	#27
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Harold- I will check on switches and wire. I might have some ac screws in the hardware bin. Adam- $68 shipped on the high hump...I have cheaper ones with holes in them. Youngbuck- Sorry, no good bezels. Thanks, Ray

11-23-2010, 03:41 PM	#28
fortytwo Registered User Join Date: Oct 2010 Location: Stevens Point WI Posts: 42	Re: Parting 3/4ton 2wd Big Block Truck Are the lower a arms the same as 67? If yes im intrested in them for lifting my 67 c10. do you have any of the other lift parts (88 lift spindals etc..). Thanks Ed

11-23-2010, 04:09 PM	#29
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting 3/4ton 2wd Big Block Truck I would be interested in a high hump cover as well as the floor section it bolts to so I can convert my small hump cab if thats possible. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-23-2010, 06:43 PM	#30
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck Any intersest in selling the valve covers? Are they original GM? I have a pair of nos M/T's. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-24-2010, 12:15 AM	#31
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Harold- $15 shipped on the switches, wire, screws. 1972SuperCheyenne- 2nd in line on high hump tll74- I have stock BB valve covers $35 shipped Attached Images

11-24-2010, 01:21 AM	#32
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck Are these a match to the chrome covers (loom holders, wire holders etc.) Trying to find the correct covers for a 1970. Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-24-2010, 01:34 AM	#33
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck I will check Wed. I believe they came off a 71...but that was almost 20 years ago when they were pulled.

11-24-2010, 10:14 PM	#34
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Parting 3/4ton 2wd Big Block Truck ray how do want to be paid? I can do paypal now. Sending pm thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-24-2010, 10:42 PM	#37
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck pics Attached Images

11-25-2010, 12:05 AM	#39
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck I'll do some research to find out. Is the engine still available? Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-25-2010, 08:32 AM	#41
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	Re: Parting 3/4ton 2wd Big Block Truck Do you have the passenger side under cab exhaust hanger? Thanks Tommy __________________ 72 Cheyenne 1956 3100 1955 210 19 year old Chihuahua (Factory Teeth)

11-26-2010, 12:38 AM	#43
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck Ray, What does the engine come with? Such as carb, dist, ex.manifolds, flywheel, mounts, pulleys, water pump, etc. Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-26-2010, 12:58 AM	#44
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck 55454- sorry, no hanger tanman- will get pics, but they look bad and the pitting shows through tll74- long block with intake, flywheel, dist., water pump, and valve covers Thanks, Ray

11-26-2010, 01:52 AM	#45
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck Hmmm....ok..so it would have the balancer, t-cover, water pump, flywheel, intake, dist w/wires, valve covers, coil, thermostat housing, and p/b vac line. Do both valve covers have the loom holder brackets for the four wire holders? (located on the inside towards the rear) Is it possible to get the stamped info off the block in front of the RH cly. head and the block cast number located LH near bell housing? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw



Register or Log In To remove these advertisements.

11-26-2010, 10:23 AM	#47
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	Re: Parting 3/4ton 2wd Big Block Truck interested in the "396" emblems are they in good shape? how much shipped to 91739 please......thanks Steve __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

11-26-2010, 02:35 PM	#49
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Pics of High Hump. There are approx. 5 screw holes (see pics) and residual glue from the carpet. Other than that, it is in great shape. Attached Images

Register or Log In To remove these advertisements.