![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Ok sorry for getting off topic. Axle coated, brakes back on time to move on, again still waiting on good weather and free time from the blaster. I haven't seen rain like this is years, damn El Ni·ņo. With the rusted out tank in the cab I decided to use the opportunity to move it put back. From the advice of many on these forums and Facebook pages I picked up the 22 gal fuel tank from a 1965 mustang from Cjs pony parts it comes with a sending unit. Eventually I'll be running Dakota digital so I can set the ohms to the ford settings so it read correct. The fuel tank is a no brainer I trimmed maybe 3/8s of an inch off the bottom rail and it slides right in. I used two pieces of angels to fasten it to the sides of the frame instead of the bottom.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,074
|
Re: Backyard built 55
damnit man ... your red firewall is making me want to paint mine some crazy color before i assemble it!
looking good! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Appreciate it bud I wanted it to look rough until I pop the hood or the doors. Right nows the time for you to do it haha. What's the exterior color gonna be on yours?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Been a couple weeks since I posted got alot done. With the motor and Trans in its final resting spot I'm buttoning up all the small stuff I also built my own drive shaft. Made power steering lines with AN fittings an PTFE hose, swapped to AN fittings on my transmission and using pushlock hoses, mounted my new aluminum radiator, trans cooler, and electric fan. I also put down some kilmat, got a new trans tunnel, mounted my lokar shifter, laid some carpet in it and man does it fit terrible. Probably the last time I use that company, anyways what else oh yeah throttle bracket and cable along with gas pedal put new rubber between the inner femder and cab mounted my dipstick, stripped some.thread haha, and re finished my hood hinges. Think that's about it but who remembers.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
More pics
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
I didn't realize the new trans tunnel was fiberglass when I ordered it oh well, feels sturdy.
Last edited by Rickysnickers; 07-18-2021 at 11:25 AM. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,074
|
Re: Backyard built 55
the weave on the drive shaft
![]() rest is fitting up quite nice too, just bangin stuff out. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2020
Location: CHURCHVILLE NY
Posts: 469
|
Re: Backyard built 55
coming along really nice your welding skills are top notch. Great progress. Steve
__________________
My 57 Fleetside C4 build. http://67-72chevytrucks.com/vboard/s...d.php?t=817054 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
|
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() ![]() Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,005
|
Re: Backyard built 55
I apologize in advance as this may sound like a stupid question. How did you measure for the shifter and make the hole so tight so that it just fits? There's a gaping hole in mine for the floor shifter, that was already there.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Never a stupid question when your looking for an answer. All I did was measure from the edge of the trans tunnel to center of the shifter, and the width, measure from the front of the shifter in park and the back of the shifter in 1st and cut a small hole. Removed my shifter knob so it would slide over, then I took a sharpie and marked the edges where it was tight and used an end grinder and burr bit to slowly open the hole until it fit perfectly.
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Been a minute so I'm gonna drop a whole bunch of photos and info at once haha. I've been asked how this build has came along so quickly? Because I've treated it as a full time job. Literally working 8 to 10 hour days on it to try and get it where I want it. Let's see first I'll go over the battery box, mine tray was trash but the uprights were in great shape I also had a new off of another year truck I'm not sure what it fit but I cut them both up to make one that fit my truck. Worked perfectly. https://youtu.be/Ab6MfFM4I2E
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Next let's move onto the wiring. I ordered a complete update kit from American auto wire and these awesome wirefly crimpers. I CANNOT stress this enough get these crimpers off amazon if you use this kit, your standard harbor freight ones aren't going to work. Even if you do get it spliced together is it going to last for years to come? Probably not. I also soldered every connection and shrink wrapped them for extra insurance. If your a normal guy like me getting a 25 pound box of wiring dropped off at your door was the most intimidating thing to date. It's not hard, yes it takes time, yes you need to go slow but the instructions they send are amazing. The customer service is even better I had a few questions that I thought would kind of stump them or they may have to get back to me, nope every call to them was over within 5 mins because they know their product.
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
The only four connections that I didn't crimp myself were the main 175amp fuses that power you fuse box, starter, and alternator. I took them to a local electric shop and they hydrolic pressed them for free.
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
This kit even has the single pin connectors to replace your park lights, along with the boots and sleeves to cover the wires. Had to throw alittle tail light action in there.
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Oct 2015
Location: Costa Mesa, CA
Posts: 190
|
Re: Backyard built 55
Man that came out nice. Back in the like 99 or 2000, I rewired my '56 Merc front to back with wiring I "Johnny Cash'd" from work(if you know what I mean). I literally just cut the harness in the middle of the car, and made new a new harness based on the wiring diagram in the manual. I couldnt find new sockets for the tail lights, so I ended up soldering large balls of solder on the end of the wire for the socket connectors, it worked for several years without issue. So its nice to see new reproduction sockets/wiring are available.
|
![]() |
![]() |
![]() |
#18 | |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Quote:
|
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,074
|
Re: Backyard built 55
1) that red firewall n dash still get me every time
2) do you have a URL to the crimper n such? that looks like an upgrade i should buy into here ASAP. |
![]() |
![]() |
![]() |
#20 | |
Registered User
Join Date: May 2021
Location: Cameron
Posts: 45
|
Re: Backyard built 55
Quote:
Yeah I got the 8 piece kit it had what I needed. |
|
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() ![]() Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,005
|
Re: Backyard built 55
There a few different choices here, but I think you will find what you are looking for.
https://www.amazon.com/Wirefy-Crimpi...hi&sr=1-3&th=1 |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,074
|
Re: Backyard built 55
looks like only the 8pc kit comes with the open barrel crimp tooling for weather pack connectors ... looks like you got the 8pc.
:addedtocart: |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,074
|
Re: Backyard built 55
i have one of these guys for doing cables with, it's amazing. did steel cable railings in my house, but then also some big-a$s battery cables more recently.
https://smile.amazon.com/Hydraulic-B...s%2C721&sr=1-7 |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1955, axle, camaro, chevy, patina |
|
|