Best 3/4t or 1t running gear - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RckyMntnKng · 08-30-2007, 05:29 PM

What is a good or great set of Axles off a late model rig that could be found
in a junk yard or what not and rebuilt for a Jimmy or Blazer?

Considering a large lift and tires to be used For street and Off-roading.

Something that may come stock with Low gears etc

Want to be able to run lockers

Want them STOUT but not overkill for weight

A D60 and Corp 14 bolt is what ive seen in other threads?

Any advice is apperciated. My Jimmy is currently getting constructed (Body wise and paint wise) but this will eb the next step and I can start getting ready for it.

What vehicles would I search for if I wanted to steal some axles etc

Thanks RckyMntnKng

08-30-2007, 05:29 PM	#1
RckyMntnKng Registered User Join Date: Apr 2007 Location: Meridian, Idaho Posts: 316	Best 3/4t or 1t running gear & Lift (for 38's) What is a good or great set of Axles off a late model rig that could be found in a junk yard or what not and rebuilt for a Jimmy or Blazer? Considering a large lift and tires to be used For street and Off-roading. Something that may come stock with Low gears etc Want to be able to run lockers Want them STOUT but not overkill for weight A D60 and Corp 14 bolt is what ive seen in other threads? Any advice is apperciated. My Jimmy is currently getting constructed (Body wise and paint wise) but this will eb the next step and I can start getting ready for it. What vehicles would I search for if I wanted to steal some axles etc Thanks RckyMntnKng __________________ 71 Jimmy: D60/14BFF, 9"F/11"B Lift, 350-350-203-205, Crossover Hydro steering, Beadlocks, Tube stuff and the bottomless cooler Last edited by RckyMntnKng; 09-05-2007 at 06:01 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.