CO A/C Dash, Firewall, Low Hump, & Other Cab Cuts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fogert · 04-02-2016, 04:33 PM

Quote:

Originally Posted by 402Bowtie

Sorry, I have some NOS stuff, but no GMC-specific parts.

it can be used, pleas help me to find

, i need this part for finish my truck

**402Bowtie** · 04-05-2016, 01:54 PM

Passenger A-pillar sent to twistedchevy. No other cuts have been made since original posting.

DarkKnightWong · 04-11-2016, 09:32 PM

Hi

How is the Cowl area ?

Would you be willing to cut it out completely and ship or cut it up ?

I have 3 areas on my cowl that need patch panels.
Here are the area of the cowl I need patch panels for.

Wiper Mount Area

Passenger Side right as the cowl starts to curve.

Passenger Side Cowl .. Last Opening before the Curve down.

Im in GA 30338

Thanks
Allen

twistedchevy · 04-11-2016, 10:36 PM

Got my part today, thanks

**402Bowtie** · 04-11-2016, 11:13 PM

Quote:

Originally Posted by DarkKnightWong

Hi

How is the Cowl area ?

Would you be willing to cut it out completely and ship or cut it up ?

Thanks
Allen

I think the cowl area is perfect. Yes I would be willing to cut and ship. Let me send you a PM with some details and some questions I have.

Quote:

Originally Posted by twistedchevy

Got my part today, thanks

Glad to hear. Thank you!

phatzilla · 04-12-2016, 12:10 AM

still have the inner roof panel?

**402Bowtie** · 04-12-2016, 12:16 AM

Quote:

Originally Posted by phatzilla

still have the inner roof panel?

Yes I do. It is untouched and in great shape. Just has surface rust on the top since that face was untreated from factory. I cut the outer roof off in my garage a few months ago, so not like it has been exposed a long time.

phatzilla · 04-12-2016, 12:19 AM

how much?

**402Bowtie** · 04-12-2016, 12:44 AM

Quote:

Originally Posted by phatzilla

how much?

If I cut the red lines shown in the picture below, I would want $50 plus shipping. That would leave all tack welds in place leaving in place the top windshield frame, the tops of door frames, and almost all of the drip rail.

It would be very labor-intensive to drill out those spot welds, which I could do, but I would want $150 plus shipping in that scenario.

What is your zip code? I can try to get a shipping estimate. Cutting it down the middle would probably reduce shipping...do you want it quoted as one piece or two halves in one box?....or other ideas?

phatzilla · 04-12-2016, 12:48 AM

one piece, 45231

phatzilla · 04-12-2016, 12:49 AM

can you leave me the top of the back window?

**402Bowtie** · 04-12-2016, 12:51 AM

Quote:

Originally Posted by phatzilla

can you leave me the top of the back window?

Sure let me get back to you with a quote.

phatzilla · 04-12-2016, 12:53 AM

how far can you come down the a pillar?

**402Bowtie** · 04-12-2016, 12:54 AM

Quote:

Originally Posted by phatzilla

how far can you come down the a pillar?

Passenger side is gone where my red line is. Driver side still there.

phatzilla · 04-12-2016, 01:11 AM

that's cool, where the red line is will do

phatzilla · 04-12-2016, 06:21 PM

We're you able to get a shipping quote?

**402Bowtie** · 04-12-2016, 11:03 PM

Quote:

Originally Posted by phatzilla

We're you able to get a shipping quote?

PM sent

**402Bowtie** · 04-14-2016, 01:26 PM

Pictures for phatzilla and DarkKnightWong

phatzilla · 04-14-2016, 10:12 PM

I will take the roof secrion

DarkKnightWong · 04-15-2016, 10:02 PM

I think just the wiper area I have marked.

I need it as close to the firewall as possible or if its easier even some of the top of the fire wall.

What do you think that would run ?

Thanks
Allen

**402Bowtie** · 04-16-2016, 12:58 PM

Quote:

Originally Posted by DarkKnightWong

I think just the wiper area I have marked.

I need it as close to the firewall as possible or if its easier even some of the top of the fire wall.

What do you think that would run ?

Thanks
Allen

How about this for $50 shipped via money order or $51.80 shipped via Paypal?

718jwh · 04-16-2016, 10:09 PM

You still have the LH cab corner, need area in picture and about 10" around the corner in back if dent free.
Thanks

**402Bowtie** · 04-16-2016, 11:16 PM

Quote:

Originally Posted by 718jwh

You still have the LH cab corner, need area in picture and about 10" around the corner in back if dent free.
Thanks

It has one quarter-sized dent that's not very deep (definitely less than 1/8" deep, probably 1/16" deep) shown with the red arrow. It has another area of "rub" shown with green arrow. Not really a dent, but appears a little metal has been worn away.

The blue line shows where I measure 10" in from the outer most edge. There is a 3/8" hole outside the 10" and one 1/4" hole within the 10" (yellow arrows). The cab corner is rusted/gone. The gray stuff on bottom portion of corner is undercoating with a little bit of moss growing on top.

I don't see any other damage from the inside or outside.

If you're still interested, I'm thinking I will cut at the blue dashed line, if that works for you. I would want $45 plus shipping. These cuts have been more time-intensive than I originally thought they would be....

Let me know!
John

69rut · 04-17-2016, 07:30 PM

Do you have any drip rail left? I would like a section of the rail that runs down from the top at the rear of the door opening. If I had one side from the radius down, I think that would be enough.

Also looking for sbc engine stands.

**402Bowtie** · 04-17-2016, 08:09 PM

Quote:

Originally Posted by 69rut

Do you have any drip rail left? I would like a section of the rail that runs down from the top at the rear of the door opening. If I had one side from the radius down, I think that would be enough.

Also looking for sbc engine stands.

I have the drip rail on both sides starting at the roof seam and all the way down. Cutting out 1" on each side of the drip rail, I would want $20 each plus shipping. If you just wanted one side, I would probably give you the passenger side. Let me know....

Sorry no engine stands.

04-05-2016, 01:54 PM	#27
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Passenger A-pillar sent to twistedchevy. No other cuts have been made since original posting.

04-11-2016, 09:32 PM	#28
DarkKnightWong Registered User Join Date: Oct 2012 Location: Dunwoody GA Posts: 34	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Hi How is the Cowl area ? Would you be willing to cut it out completely and ship or cut it up ? I have 3 areas on my cowl that need patch panels. Here are the area of the cowl I need patch panels for. Wiper Mount Area Passenger Side right as the cowl starts to curve. Passenger Side Cowl .. Last Opening before the Curve down. Im in GA 30338 Thanks Allen

04-11-2016, 10:36 PM	#29
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Got my part today, thanks __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

04-12-2016, 12:10 AM	#31
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts still have the inner roof panel?

04-12-2016, 12:19 AM	#33
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts how much?

04-12-2016, 12:48 AM	#35
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts one piece, 45231

04-12-2016, 12:49 AM	#36
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts can you leave me the top of the back window?

04-12-2016, 12:53 AM	#38
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts how far can you come down the a pillar?

04-12-2016, 01:11 AM	#40
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts that's cool, where the red line is will do

04-12-2016, 06:21 PM	#41
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts We're you able to get a shipping quote?

04-14-2016, 01:26 PM	#43
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Pictures for phatzilla and DarkKnightWong Attached Images

04-14-2016, 10:12 PM	#44
phatzilla Registered User Join Date: Mar 2016 Location: Cincinnati ohio Posts: 8	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts I will take the roof secrion

04-15-2016, 10:02 PM	#45
DarkKnightWong Registered User Join Date: Oct 2012 Location: Dunwoody GA Posts: 34	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts I think just the wiper area I have marked. I need it as close to the firewall as possible or if its easier even some of the top of the fire wall. What do you think that would run ? Thanks Allen Attached Images

04-16-2016, 10:09 PM	#47
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts You still have the LH cab corner, need area in picture and about 10" around the corner in back if dent free. Thanks Attached Images

04-17-2016, 07:30 PM	#49
69rut Registered User Join Date: Sep 2006 Location: SE Virginia Posts: 158	Re: A/C Dash, Firewall, Low Hump, & Other Cab Cuts Do you have any drip rail left? I would like a section of the rail that runs down from the top at the rear of the door opening. If I had one side from the radius down, I think that would be enough. Also looking for sbc engine stands. __________________ trailers are for boats



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.