AL Cutting up 65 cab

[ScottH]

would u b willing to cut out & ship the center hump?

[Mack B]

Originally Posted by ScottH

would u b willing to cut out & ship the center hump?

Yes sir, the pic didn't show up as sharp as I hoped. The area under the gas pedal has rusted through, the passenger side is soft in that area as well. If those areas don't matter to you, just show me where you want it cut.

[ScottH]

Appreciate ur help on this. The easiest way would be from the open seam to where it ends under the seat. On the sides if u could cut it where it meets the flat floor area on both sides that should work. LMK if that isnt clear & what u need for the patch.

Thanks
Scott

[aotte1]

Interest in big back window section, condition and pics of it.
What price do you want?

Les

[Mack B]

Originally Posted by aotte1

Interest in big back window section, condition and pics of it.
What price do you want?

Les

I'm using that on my project, that's the reason I bought this truck. Sorry about that.

[Mack B]

Originally Posted by ScottH

Appreciate ur help on this. The easiest way would be from the open seam to where it ends under the seat. On the sides if u could cut it where it meets the flat floor area on both sides that should work. LMK if that isnt clear & what u need for the patch.

Thanks
Scott

Is this to far back or you need it further back? I'm guessing shipping weight to be about 15lbs (I could be off it's been a while) that puts shipping at $35 for a total of $50. If that's in the ball park of what you had in mind I'll cut it out, box it and get a definite price on shipping to you.

[MikeG.]

I want the Whole dash from door to door

[fredhlynch2]

Need bracket and pedals for the brake and clutch. Zip code is 54935

[Mack B]

Originally Posted by fredhlynch2

Need bracket and pedals for the brake and clutch. Zip code is 54935

Let me make sure everything is there, and I'll get you a shipping quote this weekend.

[Mack B]

Originally Posted by fredhlynch2

Need bracket and pedals for the brake and clutch. Zip code is 54935

Is this the only peices you need? If so $50.00 to your door. And I'm going to need to find a box.

[Mack B]

Originally Posted by MikeG.

I want the Whole dash from door to door

I figured 40lb shipping weight (someone set me straight if I'm way off) and it came up to $100.00 for shipping for a total of $115. Let me know if you are interested, I'll cut it out and get a definite shipping price

[ScottH]

Thanks 4 the pic mack, let me check mine again 2 b sure on the length.
Will get back 2 u.

Scott

[ScottH]

Mack, finally had a chance to check out my floor (had to remove several "patches"). What u have outlined looks close. On the back section I only need to where it begins to slope down & starts to narrow. Also on the sides if u can include around 3" of the floor on the drivers side in the area where the hole is cut , that would be great. Shipping is to 08753.

Thanks very much.
Scott

[Mack B]

Originally Posted by ScottH

Mack, finally had a chance to check out my floor (had to remove several "patches"). What u have outlined looks close. On the back section I only need to where it begins to slope down & starts to narrow. Also on the sides if u can include around 3" of the floor on the drivers side in the area where the hole is cut , that would be great. Shipping is to 08753.

Thanks very much.
Scott

Hey Scott, the passenger side was in worse shape than it appeared, the middle is decent, where it meets the toe board and the step up to go under the seat though are rough. If this still fits your needs and you want it it's $50.00 to your door, if you need a better piece I understand that as well.

Thanks!

[62 short step]

I'll get in line for the dash/radio cut out.

[ScottH]

Mack, thanks 4 the pics. I should be able to make that work.
Send me ur paypal info & I will send u payment.

Scott

[Mack B]

ScottH and Jasons, y'all both have pm's. Thanks!

[TimE]

How is the roof top panel? Is it rotten around the gutter edges? If it's solid(but what in south AL is though, right?)let me know a price. If you're not too far of a drive, I could pick it up.

[Mack B]

Originally Posted by TimE

How is the roof top panel? Is it rotten around the gutter edges? If it's solid(but what in south AL is though, right?)let me know a price. If you're not too far of a drive, I could pick it up.

Hello sir! The roof on this one is junk, but the gentleman that I got this truck from had another that was in better shape. He likely won't cut it off but expressed interest in selling the whole truck a few weeks ago. I could get you his number and possibly get some pictures if that interests you.

There is another (or was, been a while) in a yard just across the state line in Bratt Florida that was wrecked in the rear but the sheet metal was pretty solid otherwise.

I'm about 20 miles north east of Bay Minette. Happy to help anyway I can.

[TimE]

Cool! I hit you up in a PM...

[Mack B]

Originally Posted by TimE

Cool! I hit you up in a PM...

Tim, I didn't see this message, also I didn't get a pm. Just didn't want you to think I was ignoring you.

[made2drag]

I need the driver door. I'm near Montgomery al

[Mack B]

Originally Posted by made2drag

I need the driver door. I'm near Montgomery al

If you have a door already it's likely as good as this one or better. I also cut the lower inside door panel off for another member already.

[made2drag]

Originally Posted by Mack B

If you have a door already it's likely as good as this one or better. I also cut the lower inside door panel off for another member already.

I bought a 64 with no driver door, so any door is better than nothing .... how much do you need for it?

[ScottH]

Mack, any chance the steering column is available?