The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-11-2012, 06:58 PM   #26
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

found a TH350 handbook on Amazon today, and got it, maybe some information in there I can use as well.

Amazon.com: Turbo Hydra-Matic 350 Handbook... Amazon.com: Turbo Hydra-Matic 350 Handbook...
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-12-2012, 11:10 AM   #27
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

I am going to be getting some video of some of my rebuild as well, in which I will post up on my you tube channel, when I do I will be putting up a link so it can be found.
being as I don't have to work today, I only have 1 meeting on my schedule, I will be posting my pictures later today so every one can see where I am at.

Again thank you all for the comments and advise, and jokes.
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-12-2012, 11:17 AM   #28
Edahall
Registered User
 
Join Date: May 2011
Location: Goliad, TX
Posts: 672
Re: My TH350 rebuild

Quote:
Originally Posted by 1977K10 View Post
I am going to be getting some video of some of my rebuild as well, in which I will post up on my you tube channel, when I do I will be putting up a link so it can be found.
being as I don't have to work today, I only have 1 meeting on my schedule, I will be posting my pictures later today so every one can see where I am at.

Again thank you all for the comments and advise, and jokes.

Hey, you're going to be putting all the shady transmission rebuilders out of work what that video. Once you get done rebuilding one of these things, you'll never have a transmission rebuilder do the work again.
__________________
1990 ¾ ton 4x4 Chevy Suburban
-Cummins Diesel - 12 valve - factory rebuilt
-6 speed bullet proof manual transmission - NV5600
-Gear Vendors Overdrive - HX35 Holset Turbo
-NP205 iron transfer case
-3.73 gears -2" Lift
Edahall is offline   Reply With Quote
Old 06-12-2012, 02:36 PM   #29
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Talking Re: My TH350 rebuild

I kinda hope, I know i treat my stuff like its a part of me, I don't allow steangers to touch me, why should i allow them to touch my truck.
Lol,
I am not trying to put honest people out of work, but i know shops don't all the tie give a run down of what they do, if people learn how to take care of stuff then business lose out, but that's what made America strong, people doing things.
If i can help teach and learn at the same time great.
Posted via Mobile Device
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-13-2012, 05:08 PM   #30
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

got a call from my other job yesterday, so I didn't get to post, so here are some of my pics.
1. these small bolt/nuts I replaced due to the old bolts vibrated out
so I made sure these wouldn't.
2. I had just removed the three (3) bolts (TH350) connecting my flywheel to
my Torque converter, I was able to rotate the converter with one finger
so I know know that after I rebuild, I should be able to still rotate this easily.
3. The modulator after I just removed the vacuum hose.
4. a shot of the worn down transmission fluid return line.
I found that if I use reinforced hose that allows for some flexibility of routing,
but I want to keep it as straight as possible to keep the fluid dynamics
flowing good, and keep resistance to a minimum. I may look into bending
my own tube to a custom route, because I will be installing a specific
transmission inter cooler in line after going through the radiator cooler.
5. a look at the bottom of the transmission with the pan removed, the filter
clearly visible, after I drained the pan for the second time getting the rest
of the fluid out I am still finding parts of the friction gaskets, and such in
the bottom of the pan, as well as alot of thick burn fluid just hanging
around the bottom of the pan as well.
I will get this cleaned out and looking real nice and get a layer of like
undercoating on the pan so it don't rust and I am going to make a skid
plate for protection of the underneath of the transmission.
As soon as possible, I am also going to be getting new mounts, and other
bushings for everything that the trans oil wore down.
Attached Images
     
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-13-2012, 06:00 PM   #31
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: My TH350 rebuild

One word of advice. Clean!!!!! You must get everything spotless before going back toghther. Auto trans need to be clean when reassembling.
Ok maybe more than one word.

Most of the tools on the list probably won't be needed. You will need a spring compressor for the low reverse return springs and one for the foward and direct drums. You can get a couple of large hose clamps to align the 2 pump halves. If you dont feel comfortable dropping the pump back in get a couple of long bolts and cut the heads off to use for alignment dowels. You can do the same for the valve body.
__________________
___________________

78 ccsb dually
5.3
4l60e
http://67-72chevytrucks.com/vboard/s...d.php?t=491551
rs72z is offline   Reply With Quote
Old 06-13-2012, 06:05 PM   #32
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

So true, I wouldn't put this back together dirty, it would get particles back in and slowly tear up the parts just replaced

ok, sounds like good advice as well, Thank you
So long as I do this slow like I am and look at everything, I believe that putting it back together will be no problem.

the bolts are a good Idea as well.
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-13-2012, 10:17 PM   #33
Edahall
Registered User
 
Join Date: May 2011
Location: Goliad, TX
Posts: 672
Re: My TH350 rebuild

Be careful with lint from towels. They can wreak havoc on a rebuild. I also dip everything in some clean transmission oil before reassembling.
__________________
1990 ¾ ton 4x4 Chevy Suburban
-Cummins Diesel - 12 valve - factory rebuilt
-6 speed bullet proof manual transmission - NV5600
-Gear Vendors Overdrive - HX35 Holset Turbo
-NP205 iron transfer case
-3.73 gears -2" Lift
Edahall is offline   Reply With Quote
Old 06-13-2012, 11:43 PM   #34
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Smile Re: My TH350 rebuild

Oh yea, i would never use old trans fluid to lube new parts, theres still crap in it that filtering cant get out.
I was thinking about like chamois to do a finishing wipe down before install unless someone found a better alternative.
Posted via Mobile Device
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-16-2012, 02:12 AM   #35
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

I got my th350 handbook today, I have more reading material to absorb while rebuilding... COOL
Attached Images
 
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-16-2012, 11:55 AM   #36
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Smile Re: My TH350 rebuild

this friday, saturday, and sunday are long days, can't wait until monday the starting of my short days to get back to work on my trans.
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-16-2012, 01:15 PM   #37
deth_1970
Registered User
 
deth_1970's Avatar
 
Join Date: Jul 2004
Location: Braggs, okla
Posts: 161
Re: My TH350 rebuild

k10 that is a good book I have that one in my library, some of the tools you can make yourself, front pump puller, 2-3" bolts with the same threads as the valve body with the hex head cutoff works to help guide the valve body gaskets plate, and valve body into place, same guide bolts can be used to set the front pump into place

for a pump puller I have a slide hammer with a bolt that threads into the pump itself, if you look closely there will be 2 threaded holes in the pump, at 11 and 4 o'clock if memory serves me right,

correct snap ring pliers make it nice, snapon 350 snap ring pliers, I think blue point makes a pair too, search it online, myself I have used an ice pick and screwdriver on the snap rings,

please do not try to remove the snap rings out of the piston without it being compressed,
__________________
78 dualy crew cab wife calls "the beast"
79 silverado "yeller"
99 tahoe
02 Gmc sierra
deth_1970 is offline   Reply With Quote
Old 06-16-2012, 01:20 PM   #38
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

I do have like 10-15 pair of different type of snap ring pliers, i would try to remove those incorrectly.
i bet someone has before, and endwd up paying for that.
Posted via Mobile Device
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-16-2012, 01:24 PM   #39
shawno72
C/10 junkie
 
shawno72's Avatar
 
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
Re: My TH350 rebuild

Let's rip her open!!
__________________
Shawn

70 LWB C10 current driver/project
http://67-72chevytrucks.com/vboard/s...d.php?t=663051
68 SWB C10 Work in progress.....SOLD
http://67-72chevytrucks.com/vboard/s...d.php?t=559520
72 LWB C10 Sold
71 LWB C10 Sold
68 LWB C10 CST Sold


http://youtu.be/kbB0QrBIs9k

My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"
shawno72 is offline   Reply With Quote
Old 06-16-2012, 01:29 PM   #40
deth_1970
Registered User
 
deth_1970's Avatar
 
Join Date: Jul 2004
Location: Braggs, okla
Posts: 161
Re: My TH350 rebuild

yes they have, my spring compressor is a homemade one with a foot pedal I love it better the any snapoff one, it's made out of an old box stapler, it is floor mounted

best word of advice, take your time, think it through, and if it doesn't feel right double check it,
__________________
78 dualy crew cab wife calls "the beast"
79 silverado "yeller"
99 tahoe
02 Gmc sierra
deth_1970 is offline   Reply With Quote
Old 06-18-2012, 03:48 PM   #41
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

With the concrete feeling like a frying pan, i have been reading my manuals, and got my upper and lower trans mounts ordered, so I can compare and make sure it fits like a glove.
Posted via Mobile Device
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-18-2012, 04:11 PM   #42
shawno72
C/10 junkie
 
shawno72's Avatar
 
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
Re: My TH350 rebuild

I understand it's been hotter than heck here the last few days so I haven't been out in the garage working on my engine but today is only like 85 so I'll be out there tonight.
__________________
Shawn

70 LWB C10 current driver/project
http://67-72chevytrucks.com/vboard/s...d.php?t=663051
68 SWB C10 Work in progress.....SOLD
http://67-72chevytrucks.com/vboard/s...d.php?t=559520
72 LWB C10 Sold
71 LWB C10 Sold
68 LWB C10 CST Sold


http://youtu.be/kbB0QrBIs9k

My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"
shawno72 is offline   Reply With Quote
Old 06-18-2012, 06:07 PM   #43
legendman
Registered User
 
legendman's Avatar
 
Join Date: Nov 2011
Location: 19
Posts: 607
Re: My TH350 rebuild

Subbed , just picked up a 84 c10 that has a th350 that isn't working correctly.
Good luck on the rebuild
__________________
1999 Chevy K2500 RCLB 350 4L80e
2004 Chevy 3500 C&C Dmax Allison
Quote:
Originally Posted by smackzed View Post
I put a chevrolet tailgate on my last truck and it started acting like a girl...love me, need me, want me pay attention to me. Took it off and put the GMC back on (fixed the latch) and it went back to being the same old dirty bastard it used to be
legendman is offline   Reply With Quote
Old 06-18-2012, 06:15 PM   #44
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

Quote:
Originally Posted by legendman View Post
Subbed , just picked up a 84 c10 that has a th350 that isn't working correctly.
Good luck on the rebuild
if you look into my thread here, I do have a few links that show some books to get, that I have got, and been reading, they are a great help.
Some of the guys here have also posted some great links to some business that have some good products.

I did goto Advanved Auto parts here in Colorado and got a super rebuild kit for my trans, and been tool hunting today, got a clutch spring compressor on its way from O'Reily Auto parts.
I got a bearing and seal driver from Car Quest (STL 12600) $44.11
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-18-2012, 06:28 PM   #45
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Cool Re: My TH350 rebuild

Quote:
Originally Posted by shawno72 View Post
I understand it's been hotter than heck here the last few days so I haven't been out in the garage working on my engine but today is only like 85 so I'll be out there tonight.
We hit 100 degrees today here in Wheatridge, Co, the black top feels like a frying pan that has a fire on high under it, I really don't care for it.
I like temps around 60-75 with a light cool breeze.
this makes me want to hibernate
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-18-2012, 06:43 PM   #46
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

some pics for today:
1. shows my squishy trans mounts, feel like dry marshmallows
2. shows my lower trans mounts
3. shows my new to me bearing and seal mounting tool
4. shows my (got today) LMC.com magazine summer edition
5. shows the new mounts I got today from Advanced Auto parts
Attached Images
     
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-18-2012, 07:37 PM   #47
Car'n'Guitars
Registered User
 
Car'n'Guitars's Avatar
 
Join Date: Dec 2011
Location: Elkhart, IN
Posts: 1,308
Re: My TH350 rebuild

Cool info here, I'm gonna keep a close eye on this, I hope to do this to my transmission someday.
__________________
1985 Chevrolet K10 Custom Deluxe---SOLD
1997 Ram 2500 5.9 Cummins
1985 Chevrolet Camaro Z28
1987 Chevrolet K10 Silverado
"The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257
Car'n'Guitars is offline   Reply With Quote
Old 06-19-2012, 02:08 AM   #48
1977K10
Registered User
 
1977K10's Avatar
 
Join Date: Jul 2010
Location: Arvada, Colorado
Posts: 109
Re: My TH350 rebuild

Quote:
Originally Posted by Car'n'Guitars View Post
Cool info here, I'm gonna keep a close eye on this, I hope to do this to my transmission someday.

I am glad that you found this thread, and that it may help with your rebuild as well, thats one reason why I am doing this, I had great advice, help, comments when I posted my first coment, and allowed to "nose" around looking at others helping others. I hope that you find this informitave
__________________

1977 K10 Chevy short box
6.6L - V8 400CI
TH350 3SP Auto on the column

http://67-72chevytrucks.com/vboard/s...d.php?t=525540
1977K10 is offline   Reply With Quote
Old 06-19-2012, 06:20 AM   #49
D13
Registered User
 
D13's Avatar
 
Join Date: Feb 2007
Location: Memphis MI
Posts: 1,851
Re: My TH350 rebuild

Don't undercoat your pan. Not only will it be a PITA to get off and clean next time, the undercoating will hold in heat. A coat of paint, engine black works good, is all you need. I like to do that after it's put on, that way the bolts get some and it all looks pretty.If you want ot drop some coin stainless bolts are good on the pan... and polished stainless - well, now it's a show car!
__________________
1987 2 ton
1982 250/TH350 beater in progress
Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping
Plus a mess o' tractors
D13 is offline   Reply With Quote
Old 06-19-2012, 10:42 AM   #50
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: My TH350 rebuild

here's a couple of links that might help.

http://www.nastyz28.com/forum/showthread.php?t=53671

http://turbo350only.com/
__________________
___________________

78 ccsb dually
5.3
4l60e
http://67-72chevytrucks.com/vboard/s...d.php?t=491551
rs72z is offline   Reply With Quote
Reply

Bookmarks

Tags
77 k10, rebuild, th350, tranny, transmission


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com