New trash truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tvblazer78 · 01-12-2011, 07:24 PM

Quote:

Originally Posted by spudz

Are you saying you open the doors with the lock cyl right? I'm interested in how you do this also.

Yep that's right. As soon as this snow melts a little bit more I will start on it.
Posted via Mobile Device

chevyndn · 01-12-2011, 07:33 PM

ive always wanted to do that, shave the handles and leave the lock cylinder to open it.

cable666guy · 01-13-2011, 12:23 PM

Cool project!! Do you have any lean back with those buckets, or are they straight up with the reg. cab?

tvblazer78 · 01-13-2011, 04:12 PM

Quote:

Originally Posted by cable666guy

Cool project!! Do you have any lean back with those buckets, or are they straight up with the reg. cab?

Straight up! When your in the seat its not bad at all, its just getting in and out is not so easy. It feels like your sitting in a race car, straight up on the wheel! lol!

jb1016 · 01-23-2011, 03:20 PM

Man, this truck is begging for an LS1 to complete the vette theme...

And I gotta say, ZQ8 wheels look killer on just about anything!

tvblazer78 · 01-31-2011, 10:46 AM

Quote:

Originally Posted by jb1016

Man, this truck is begging for an LS1 to complete the vette theme...

And I gotta say, ZQ8 wheels look killer on just about anything!

I know it is, but this is my trash truck and I am trying to keep everything that I am doing plus the cost of the truck under $800. I have about $700 in it right now.

tvblazer78 · 01-31-2011, 11:28 AM

OK guys, here is step by step what to do after you get all the parts out of the door. Take the handle rod out and the lock rod.

(Pic 1)In my first pic you see both rods plus lock and handle, this is what they look like when you first take them out.

(Pic 2)Next pic, you see how I cut the lock rod that is about 2" long and the handle rod that is about 4.5 long. I am saying about because it could be a little different on your truck. Cut them a little long and you can always put a bend in them.

(Pic 3)I have welded the parts together and you can now test fit. Like I said it was take a time or two to get the bends just right so it works nice and smooth.

I also have pics with the plate welded it. You have to take you time so you do not get it to hot.

I hope that helps some of you guys.

Trav

spudz · 01-31-2011, 01:18 PM

bad ass... thanks

chevyndn · 01-31-2011, 09:22 PM

sweet!!!

jb1016 · 02-01-2011, 09:59 AM

Very cool, never seen that before.

tvblazer78 · 02-02-2011, 06:05 PM

No prob guys, I hope it helps you all a little..

GMC91 · 02-02-2011, 10:11 PM

Is it easy to open the door with the key? And would it be any different on power doors?

tvblazer78 · 02-03-2011, 01:48 PM

Quote:

Originally Posted by GMC91

Is it easy to open the door with the key? And would it be any different on power doors?

Ya its easy to open as long as your door opened easy before. And it would be the same for power, you just can not lock and unlock your doors with the key anymore. So you would have to make sure you unluck it before you use your key to open the door.

GMC91 · 02-03-2011, 09:26 PM

Alrighty, thank you.

spudz · 02-06-2011, 07:30 PM

are the plates you welded in over the handle opening the one you buy or did you cut them out? what thickness steel?

tvblazer78 · 02-06-2011, 10:13 PM

Quote:

Originally Posted by spudz

are the plates you welded in over the handle opening the one you buy or did you cut them out? what thickness steel?

Yes I did buy them from suicide doors, they work good..

http://www.*****************/sheetmet...illers-1982-93

spudz · 02-06-2011, 11:02 PM

cool thanks! do you have to spray somethin like weld thru primer on the door opening first? or does it really matter

tvblazer78 · 02-08-2011, 01:49 PM

Quote:

Originally Posted by spudz

cool thanks! do you have to spray somethin like weld thru primer on the door opening first? or does it really matter

I did not do that, but you can. I think you will be fine with out it..

tvblazer78 · 02-25-2011, 03:30 PM

Some new pics of the trash truck...

jb1016 · 02-25-2011, 06:35 PM

That looks awesome!

tvblazer78 · 02-28-2011, 12:46 PM

Quote:

Originally Posted by jb1016

That looks awesome!

Thank you sir! I have new pics of my front bumper that I will post later. I did some work on it that you all my like to see.
Posted via Mobile Device

chevyndn · 02-28-2011, 06:44 PM

man that thing is looking sweet!!!

tvblazer78 · 03-03-2011, 04:13 PM

Pics of my bumper..

jb1016 · 03-03-2011, 11:06 PM

Nice! No front plate in TN -- gotta love it.

tvblazer78 · 03-04-2011, 02:46 PM

Quote:

Originally Posted by jb1016

Nice! No front plate in TN -- gotta love it.

Thanks man, ya it's nice not to have a plate on the front.
Posted via Mobile Device

01-12-2011, 07:33 PM	#27
chevyndn Registered User Join Date: Jan 2009 Location: independence mo. Posts: 176	Re: New trash truck ive always wanted to do that, shave the handles and leave the lock cylinder to open it.

01-13-2011, 12:23 PM	#28
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: New trash truck Cool project!! Do you have any lean back with those buckets, or are they straight up with the reg. cab?

01-31-2011, 11:28 AM	#32
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: New trash truck OK guys, here is step by step what to do after you get all the parts out of the door. Take the handle rod out and the lock rod. (Pic 1)In my first pic you see both rods plus lock and handle, this is what they look like when you first take them out. (Pic 2)Next pic, you see how I cut the lock rod that is about 2" long and the handle rod that is about 4.5 long. I am saying about because it could be a little different on your truck. Cut them a little long and you can always put a bend in them. (Pic 3)I have welded the parts together and you can now test fit. Like I said it was take a time or two to get the bends just right so it works nice and smooth. I also have pics with the plate welded it. You have to take you time so you do not get it to hot. I hope that helps some of you guys. Trav Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

01-31-2011, 01:18 PM	#33
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: New trash truck bad ass... thanks __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

01-31-2011, 09:22 PM	#34
chevyndn Registered User Join Date: Jan 2009 Location: independence mo. Posts: 176	Re: New trash truck sweet!!!

02-02-2011, 06:05 PM	#36
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: New trash truck No prob guys, I hope it helps you all a little.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

02-02-2011, 10:11 PM	#37
GMC91 Always trouble Join Date: Jul 2009 Location: Hartsellle, Al Posts: 1,111	Re: New trash truck Is it easy to open the door with the key? And would it be any different on power doors? __________________ 91 Silverado Regular cab, 2wd, swb-project truck 97 Silverado Extended cab, 2wd, swb-driver

02-03-2011, 09:26 PM	#39
GMC91 Always trouble Join Date: Jul 2009 Location: Hartsellle, Al Posts: 1,111	Re: New trash truck Alrighty, thank you. __________________ 91 Silverado Regular cab, 2wd, swb-project truck 97 Silverado Extended cab, 2wd, swb-driver

02-06-2011, 07:30 PM	#40
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: New trash truck are the plates you welded in over the handle opening the one you buy or did you cut them out? what thickness steel? __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

02-06-2011, 11:02 PM	#42
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: New trash truck cool thanks! do you have to spray somethin like weld thru primer on the door opening first? or does it really matter __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

02-25-2011, 03:30 PM	#44
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: New trash truck Some new pics of the trash truck... Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

02-28-2011, 06:44 PM	#47
chevyndn Registered User Join Date: Jan 2009 Location: independence mo. Posts: 176	Re: New trash truck man that thing is looking sweet!!!

03-03-2011, 04:13 PM	#48
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: New trash truck Pics of my bumper.. Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.