1968 GMC k2500 Stepper - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 k15 · 06-09-2023, 01:53 PM

Took on a 87 mile drive and took this picture, no problems other then the break lights work intermittently but running lights always work. I think I’ll put a new headlight switch in and see if that fixes it.

**Steeveedee** · 06-09-2023, 02:11 PM

Dig that truck! I'd love one in 2WD.

**68bowtie** · 06-09-2023, 05:07 PM

Awesome. Those old tires hanging in there?

72 k15 · 06-09-2023, 05:28 PM

They are doing pretty good actually, pretty loud and can give some vibration but I think ill leave them for a while.

72 k15 · 06-11-2023, 07:52 PM

Got the bumper on, LMC had “bumper bolts” they are just carriage bolts not supper happy about it as it had the writing on the head

72 k15 · 06-15-2023, 07:23 PM

Got some new reverse light housings, wirring on old ones was shot. Also can see the Dana 60 peaking through in the picture I was very happy to see it had the Dana. Changing all drivetrain fluids this weekend.

**CKfan** · 06-15-2023, 07:41 PM

Those rims look great on there.

72 k15 · 06-15-2023, 07:49 PM

It’s a shame they would be well over 1500 for new tires and everything for them, I plan to just get some 17” steel rims and it should look almost exact.

72 k15 · 06-21-2023, 10:17 PM

Here’s what I’m working with for floors, super good minus 2 pinholes in the driver side. Anyone know what would be causing water to come in from the bottom corners (kick pannel area)? Like where the floor and cowl vent meet?

72 k15 · 06-21-2023, 10:25 PM

Drivers floor

**68bowtie** · 06-22-2023, 12:43 AM

That is THE spot where there is ALWAYS rust, at least in drier parts of California. I think leaves get down in there from the cowl and soak in rainwater and stagnate in there.

That looks damn good to me, I wouldn’t mess with that!

**clay68c10** · 06-22-2023, 09:26 AM

Any leak from the windshield will end up in that spot. Really, any moisture from above will collect there.
These trucks pretty much all have something in that spot if they weren’t always garaged.
That said, you have a great truck there. Enjoy it!

72 k15 · 06-24-2023, 11:48 PM

Changed the front diff oil and tranny, front diff was very nasty and the tranny was pretty clean. And looks like the front diff didn't seal with the new gasket and has a smaller leak.

**HO455** · 06-25-2023, 08:14 AM

Quote:

Originally Posted by 72 k15

Drivers floor

Like 68bowtie mentioned debris gets stuck in the cowl vents and water then collects instead of draining. See links for more information on cleaning the debris out.

https://67-72chevytrucks.com/vboard/...d.php?t=825070

http://67-72chevytrucks.com/vboard/s...d.php?t=544201

Water from wet boots and any leaks from the windshield area will also end up there too.

She's looking good with her new bumper. I do likes me a K model with white bumpers.

**CKfan** · 06-25-2023, 11:43 AM

I am saying this partly in jest: Quit looking, you can't handle the truth.

Note the similarities to your floor picture and mine (a little worse).

The first picture is my original floor (current build) which looked .... ok. Started digging (as usual). Second picture is the lower driver's side kick panel removed and the a pillar full of gooooo. Things only get worse.

Your truck looks really cool the way it is. IMO, if you just want a great looking driver don't dig too far. She will break your heart : )

**68bowtie** · 06-25-2023, 12:41 PM

If…

It…

Ain’t…

Broke…………..

72 k15 · 06-25-2023, 01:44 PM

Well I might have to fix it, there’s a pin hole in the kickpannel that’s letting water in and rusting the floor worse.

72 k15 · 09-23-2023, 05:42 PM

Ill have some more coming to the thread soon I found a step side bumper and a new box with the same color and patina in great shape and should match perfect.

**CKfan** · 12-09-2023, 04:09 PM

Any Updates????? Pics!

Sicklajoie · 12-09-2023, 04:52 PM

That is one cool truck!

72 k15 · 12-17-2023, 07:20 PM

Got an update for you guys, truck is parked for the winter, but before that I got a super nice matching box! Big upgrade.
Not bolted on yet, but next on the list I think will be a NP205 swap and then gears to possibly a 3.73. I don’t want to mess with swapping a overdrive in and just need to be able to go 65 and 3.73 seems to be perfect is there a chance that gearing would be not enough for the truck or would it be fine?

**'68OrangeSunshine** · 12-18-2023, 12:53 AM

Three Seven Three is perfect for these trucks. That's what I have in my '68 C/10 Stepside, my '71 GMC Jimmy, and had in my '67 K/10 Suburban.
Nice looking bed.

72 k15 · 12-19-2023, 08:24 PM

Yeah the 4.56s are pretty crazy it goes about 55-60

72 k15 · 03-07-2024, 04:00 PM

Going to be working on it here in a week or so when it gets nice out,on the last drive the vent window swivel pin broke so I’ll need a whole new vent window it looks like and I’ll rebuild them both while there. Anyone have any experience with interior red parts matching correctly? Worried the LMC red interior parts look off.I need a dash pad and arm rests.

**'68OrangeSunshine** · 03-07-2024, 07:13 PM

Quote:

Originally Posted by 72 k15

Going to be working on it here in a week or so when it gets nice out,on the last drive the vent window swivel pin broke so I’ll need a whole new vent window it looks like and I’ll rebuild them both while there. Anyone have any experience with interior red parts matching correctly? Worried the LMC red interior parts look off.I need a dash pad and arm rests.

Wow. The D/S Vent Window swivel function went limp on my '71 GMC Jimmy this summner. I was relying on it for forced air breezes, ala System Two Forty.
[Roll down 2 windows and drive at least 40 MPH].
I hope the pivot shaft ain't broke.
For the rest of the summer, I tied it back with a bunji cord. Works OK, but it's a PIA to remove if you have to secure the truck.
I have a pair of '72 Doors I can try to cannibalize.

06-09-2023, 01:53 PM	#26
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Took on a 87 mile drive and took this picture, no problems other then the break lights work intermittently but running lights always work. I think I’ll put a new headlight switch in and see if that fixes it. Attached Images __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

06-09-2023, 02:11 PM	#27
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,600	Re: 1968 GMC k2500 Stepper Dig that truck! I'd love one in 2WD. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

06-09-2023, 05:07 PM	#28
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,742	Re: 1968 GMC k2500 Stepper Awesome. Those old tires hanging in there? __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

06-09-2023, 05:28 PM	#29
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper They are doing pretty good actually, pretty loud and can give some vibration but I think ill leave them for a while. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

06-11-2023, 07:52 PM	#30
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Got the bumper on, LMC had “bumper bolts” they are just carriage bolts not supper happy about it as it had the writing on the head Attached Images __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

06-15-2023, 07:23 PM	#31
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Got some new reverse light housings, wirring on old ones was shot. Also can see the Dana 60 peaking through in the picture I was very happy to see it had the Dana. Changing all drivetrain fluids this weekend. Attached Images __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom. Last edited by 72 k15; 06-15-2023 at 07:31 PM.

06-15-2023, 07:41 PM	#32
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: 1968 GMC k2500 Stepper Those rims look great on there.

06-15-2023, 07:49 PM	#33
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper It’s a shame they would be well over 1500 for new tires and everything for them, I plan to just get some 17” steel rims and it should look almost exact. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

06-21-2023, 10:17 PM	#34
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Here’s what I’m working with for floors, super good minus 2 pinholes in the driver side. Anyone know what would be causing water to come in from the bottom corners (kick pannel area)? Like where the floor and cowl vent meet? __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom. Last edited by 72 k15; 06-21-2023 at 10:23 PM.

06-21-2023, 10:25 PM	#35
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Drivers floor Attached Images __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

06-22-2023, 12:43 AM	#36
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,742	Re: 1968 GMC k2500 Stepper That is THE spot where there is ALWAYS rust, at least in drier parts of California. I think leaves get down in there from the cowl and soak in rainwater and stagnate in there. That looks damn good to me, I wouldn’t mess with that! __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

06-22-2023, 09:26 AM	#37
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,979	Re: 1968 GMC k2500 Stepper Any leak from the windshield will end up in that spot. Really, any moisture from above will collect there. These trucks pretty much all have something in that spot if they weren’t always garaged. That said, you have a great truck there. Enjoy it! __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-24-2023, 11:48 PM	#38
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Changed the front diff oil and tranny, front diff was very nasty and the tranny was pretty clean. And looks like the front diff didn't seal with the new gasket and has a smaller leak. Attached Images __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

06-25-2023, 11:43 AM	#40
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: 1968 GMC k2500 Stepper I am saying this partly in jest: Quit looking, you can't handle the truth. Note the similarities to your floor picture and mine (a little worse). The first picture is my original floor (current build) which looked .... ok. Started digging (as usual). Second picture is the lower driver's side kick panel removed and the a pillar full of gooooo. Things only get worse. Your truck looks really cool the way it is. IMO, if you just want a great looking driver don't dig too far. She will break your heart : ) Attached Images

06-25-2023, 12:41 PM	#41
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,742	Re: 1968 GMC k2500 Stepper If… It… Ain’t… Broke………….. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD



Register or Log In To remove these advertisements.

06-25-2023, 01:44 PM	#42
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Well I might have to fix it, there’s a pin hole in the kickpannel that’s letting water in and rusting the floor worse. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

09-23-2023, 05:42 PM	#43
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Ill have some more coming to the thread soon I found a step side bumper and a new box with the same color and patina in great shape and should match perfect. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

12-09-2023, 04:09 PM	#44
CKfan Senior Member Join Date: Nov 2022 Location: CA Posts: 292	Re: 1968 GMC k2500 Stepper Any Updates????? Pics!

12-09-2023, 04:52 PM	#45
Sicklajoie The Niner Join Date: Nov 2010 Location: Broad Brook, CT Posts: 2,498	Re: 1968 GMC k2500 Stepper That is one cool truck! __________________ "A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/

12-17-2023, 07:20 PM	#46
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Got an update for you guys, truck is parked for the winter, but before that I got a super nice matching box! Big upgrade. Not bolted on yet, but next on the list I think will be a NP205 swap and then gears to possibly a 3.73. I don’t want to mess with swapping a overdrive in and just need to be able to go 65 and 3.73 seems to be perfect is there a chance that gearing would be not enough for the truck or would it be fine? Attached Images __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

12-18-2023, 12:53 AM	#47
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,440	Re: 1968 GMC k2500 Stepper Three Seven Three is perfect for these trucks. That's what I have in my '68 C/10 Stepside, my '71 GMC Jimmy, and had in my '67 K/10 Suburban. Nice looking bed. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

12-19-2023, 08:24 PM	#48
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Yeah the 4.56s are pretty crazy it goes about 55-60 __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

03-07-2024, 04:00 PM	#49
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: 1968 GMC k2500 Stepper Going to be working on it here in a week or so when it gets nice out,on the last drive the vent window swivel pin broke so I’ll need a whole new vent window it looks like and I’ll rebuild them both while there. Anyone have any experience with interior red parts matching correctly? Worried the LMC red interior parts look off.I need a dash pad and arm rests. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

Register or Log In To remove these advertisements.