CA Parting out 74 Chevy 3/4 ton 2wd* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-08-2010, 11:11 PM

Quote:

Originally Posted by DBLSPRT68

Ray, could you get a picture of it when you have time. I have the standard tire carrier, but would like the glide out option. If you release the aft end and drop it down, the glide out holder will pull out to you. The standard one just drops to the ground, and you have to wrestle with the tire...... I'll take it if it's the glide out version! David

I have the glide out carrier out. It has some bends on it. Here is a pic:

DBLSPRT68 · 02-09-2010, 04:57 AM

Quote:

Originally Posted by KrazyRay

I have the glide out carrier out. It has some bends on it. Here is a pic:

Ray, thanks for the pic. I think I'm going to pass. Sorry for the trouble of pulling it...... Shipping would be $$ and a pain for you. I'll try and find one locally. David

87Bob · 02-08-2010, 04:19 PM

Ray
Has it got the balance of the headliner trim I need?
Bob

KrazyRay · 02-09-2010, 01:01 AM

Quote:

Originally Posted by 87Bob

Ray
Has it got the balance of the headliner trim I need?
Bob

Bob, I think the pre 81 trucks have different trim.

Buick455C10 · 10-12-2010, 01:47 PM

Ray, are you motor mounts and stands still available?

KrazyRay · 10-13-2010, 09:41 AM

Sorry, They are gone.

dabels23 · 10-13-2010, 11:27 AM

What shape is the dash pad in? Price shipped 39090?

Scootin 81 C20 · 02-04-2010, 12:23 AM

Ray, what is the switch by the ash tray for? Also, what kind of shape is the mirror inside in and does it mount to the windshield or to the headliner? I think it's the angle of the pic but it looks like the latter.

KrazyRay · 02-04-2010, 10:52 AM

Quote:

Originally Posted by Scootin 81 C20

Ray, what is the switch by the ash tray for? Also, what kind of shape is the mirror inside in and does it mount to the windshield or to the headliner? I think it's the angle of the pic but it looks like the latter.

The switch by the ashtray is the mechanical fuel changeover that was used in 74 instead of the problematic electric one. Its similar to a choke cable. Too bad the cable is broke. The mirror is cloudy and mounts on the windshield.

bigblock73 · 02-04-2010, 11:27 AM

Ray, payment sent for the parts. Thanks.

KrazyRay · 02-04-2010, 11:45 AM

Quote:

Originally Posted by bigblock73

Ray, payment sent for the parts. Thanks.

Thanks, will get mailed asap

bigblock73 · 02-04-2010, 07:22 PM

Perfect!! Just what I needed! Thanks Ray.

cowboy5683 · 02-04-2010, 07:28 PM

Hey Ray- Money sent via PayPal..Thanx again for the switch!!

*Stitch* · 02-04-2010, 07:57 PM

Quote:

Originally Posted by bigblock73

Perfect!! Just what I needed! Thanks Ray.

that's awesome...you finally found a set...

dan76 · 02-04-2010, 07:29 PM

Can you shoot pics of the headers? What's the brand? What's your take on their conditon???rusted out, just rusty or scraped/crushed? If still available and depending on condition I'm in line.

KrazyRay · 02-08-2010, 11:05 PM

Quote:

Originally Posted by dan76

Can you shoot pics of the headers? What's the brand? What's your take on their conditon???rusted out, just rusty or scraped/crushed? If still available and depending on condition I'm in line.

The headers are in good condition. They could use some paint, but there are no dents in them. Will get pics soon. Thanks, Ray

Walts_restoration · 02-07-2010, 07:47 PM

Okay, need a few things, maybe from this truck or others.

73-74 grille mounting hardware and latch, want to convert my 77 over to the earlier style grille.

radiator overflow and the hose that leads to radiator for a 77.

Washer jug and bottle lid, and the filter that sits inside the jug.

Let me know. thanks.

KrazyRay · 02-08-2010, 02:07 AM

Quote:

Originally Posted by Walts_restoration

Okay, need a few things, maybe from this truck or others.

73-74 grille mounting hardware and latch, want to convert my 77 over to the earlier style grille.

radiator overflow and the hose that leads to radiator for a 77.

Washer jug and bottle lid, and the filter that sits inside the jug.

Let me know. thanks.

I will check Mon. Thanks, Ray

Walts_restoration · 02-08-2010, 02:10 AM

Sounds good

KrazyRay · 02-09-2010, 01:03 AM

Quote:

Originally Posted by Walts_restoration

Sounds good

I got in late today. Will try Tues but I'm sure the grill stuff is all there. Thanks, Ray

Walts_restoration · 02-09-2010, 02:29 AM

Quote:

Originally Posted by KrazyRay

I got in late today. Will try Tues but I'm sure the grill stuff is all there. Thanks, Ray

Its all good, ill be in late tommorow

buying camaro parts

If you had two sets i wouldnt mind at all, may be getting a 78 3/4 4x4

And would like to do the same if i get it, but a set on the shelf dont bother me.

KrazyRay · 02-09-2010, 10:35 PM

Quote:

Originally Posted by Walts_restoration

Its all good, ill be in late tommorow

buying camaro parts

If you had two sets i wouldnt mind at all, may be getting a 78 3/4 4x4

And would like to do the same if i get it, but a set on the shelf dont bother me.

I only have one set. That includes the 2 side mounting brackets and the center grill support with the latch assembly. There are 2 grill mounts that are welded on the core support which are not included. $25 plus shipping. I don't have the washer parts. Thanks, Ray

80stepsideguy · 10-13-2010, 01:46 PM

I`m interested in the jack.. Can you please give me a PM on price and shipping to zip code 32145 .I am looking for 1 to powdercoat and bolt to my inner fender...

thanks
pat

dan76 · 02-09-2010, 07:32 PM

Are you ok with shipping the headers to 84403? I know they'll be a pain to box.

KrazyRay · 02-10-2010, 12:33 PM

Quote:

Originally Posted by dan76

Are you ok with shipping the headers to 84403? I know they'll be a pain to box.

Shipping is no problem. $28 plus $40 so it would be $68 shipped.
Thanks, Ray

02-08-2010, 04:19 PM	#3
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: Parting out 74 Chevy 3/4 ton 2wd* Ray Has it got the balance of the headliner trim I need? Bob __________________ My Truck's not leaking its marking its territory!

10-12-2010, 01:47 PM	#5
Buick455C10 Registered User Join Date: Jun 2009 Location: Albuquerque NM Posts: 10	Re: Parting out 74 Chevy 3/4 ton 2wd* Ray, are you motor mounts and stands still available?

10-13-2010, 09:41 AM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 74 Chevy 3/4 ton 2wd* Sorry, They are gone.

10-13-2010, 11:27 AM	#7
dabels23 Registered User Join Date: Sep 2009 Location: Eudora, KS Posts: 131	Re: Parting out 74 Chevy 3/4 ton 2wd* What shape is the dash pad in? Price shipped 39090?

02-04-2010, 12:23 AM	#8
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, what is the switch by the ash tray for? Also, what kind of shape is the mirror inside in and does it mount to the windshield or to the headliner? I think it's the angle of the pic but it looks like the latter. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

02-04-2010, 11:27 AM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, payment sent for the parts. Thanks. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-04-2010, 07:22 PM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Parting out 74 Chevy 3/4 ton 2wd Perfect!! Just what I needed! Thanks Ray. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-04-2010, 07:28 PM	#13
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting out 74 Chevy 3/4 ton 2wd Hey Ray- Money sent via PayPal..Thanx again for the switch!!

02-04-2010, 07:29 PM	#15
dan76 Registered User Join Date: Mar 2008 Location: Salt Lake City UT Posts: 441	Re: Parting out 74 Chevy 3/4 ton 2wd Can you shoot pics of the headers? What's the brand? What's your take on their conditon???rusted out, just rusty or scraped/crushed? If still available and depending on condition I'm in line.

02-07-2010, 07:47 PM	#17
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Parting out 74 Chevy 3/4 ton 2wd* Okay, need a few things, maybe from this truck or others. 73-74 grille mounting hardware and latch, want to convert my 77 over to the earlier style grille. radiator overflow and the hose that leads to radiator for a 77. Washer jug and bottle lid, and the filter that sits inside the jug. Let me know. thanks. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-08-2010, 02:10 AM	#19
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Parting out 74 Chevy 3/4 ton 2wd* Sounds good __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

10-13-2010, 01:46 PM	#23
80stepsideguy Laid back freak Join Date: Mar 2008 Location: hastings florida Posts: 248	Re: Parting out 74 Chevy 3/4 ton 2wd* I`m interested in the jack.. Can you please give me a PM on price and shipping to zip code 32145 .I am looking for 1 to powdercoat and bolt to my inner fender... thanks pat __________________ 1980 chevy c10 step side restomod, 1970 cougar convertible 1 OF 24 ever built: 2014 Hyundai Tucson limited (daily driver).

02-09-2010, 07:32 PM	#24
dan76 Registered User Join Date: Mar 2008 Location: Salt Lake City UT Posts: 441	Re: Parting out 74 Chevy 3/4 ton 2wd* Are you ok with shipping the headers to 84403? I know they'll be a pain to box.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.