GoodMark floor, what a piece!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

classicchev · 12-03-2006, 11:44 PM

Quote:

Originally Posted by Rokcrln

Do you have the new rockers on yet, and what about the doors? Looks promising. Was the front floor edge bent down to mate up the the fire wall or was it ran long? Thanks for the info.

Kevin
LFD Inc.

I completed one side today. There where a few extra cuts and weld I had to make to get the new front and rear door pillars to somewhat match the rocker, and it seemed the cab corner was just a little too tall to match up to the rocker. A liitle dolly and hammer work can fix anything.

the front of the floor was bent down to match the upper floor, I only had to re-drill 2 holes for the rear seat mount, but every other one matched up.

All in all this is a very nice product, I would definetly do it again if needed.

classicchev · 12-03-2006, 11:49 PM

Quote:

Originally Posted by 72CSTC5

Why did you cut the back cab wall lower section off?

There are so many spot weld tight against the rear wall, and across the rear of the cab that I thought it to be quicker to cut it off and to be able to work on it on the floor. I did all of the floor replacement with the cab in the upright position, so with the cart and the cab it was almost 8 feet tall.

classicchev · 01-10-2007, 10:40 PM

Well pretty much got it all done, just have to flip the cab and do some welding on the bottom. I would HIGHLY recommend the floor, I just wish it would come with instructions, would have saved me a day or two.

Her are a couple shots of the upper portion of the floor I needed to replace

While I was at it I welded up a few holes in the firewall, cut in A/C ducts so i can get rid of at least one A/C setup. Also welded up some of the seams, still debating on the roof seam.

Now I have to push it to the side so I can make some mare money building cabinets.

Darren

cooters · 01-11-2007, 12:43 AM

Its nice to know that Alberta will be getting yet another classic Chevy. Pauls advertises the complete floor with braces and it also has rocker insides for 499. The picture is on their website.

cooters · 01-11-2007, 12:49 AM

When i was at Sema i asked Dynacorn if they had plans for a complete cab, not yet but will be looking at it in the future. Lots of red tape apperantly.

ghetto_superman · 01-11-2007, 02:39 AM

beautiful.

Joe67 · 01-11-2007, 10:20 AM

Looks great - thank you for the pictures!!

72armyswbtruck · 01-11-2007, 10:41 AM

Lookin Good, can't wait til they have a complete cab available though

ghetto_superman · 01-11-2007, 05:34 PM

someone said before that pauls has a complete floor with braces for like 499?

can i get a linky? i couldnt seem to find it. only one i found was on the goodmark site.

BACKYARD88 · 01-12-2007, 01:33 PM

here's what I found.
http://www.gmcpauls.com/Patch_Panels.htm

cooters · 01-12-2007, 02:22 PM

sorry about that, the floor with braces is on the goodmark site for 499.99. Pic is on the site as well.

ghetto_superman · 01-12-2007, 02:54 PM

ok.. now were on the same page.

Slammed66 · 01-12-2007, 11:12 PM

Hey Darren , I just got internet at my place, That friggin rocks man , glad to see it worked out so well, I have a customer down here that wants floors supports and rockers , this seems like a way better way. Keep up the good work.

classicchev · 01-13-2007, 01:02 PM

Matt, if you see Scott in the next little while, tell him it was a success, and try to sell them instead of the POS patch panels he has. Besides trying to find well over a 100 spot welds, it went well.

Slammed66 · 01-13-2007, 01:05 PM

Hmm
IM going to see him right now actually lol

Im goin fleet side this year and I need some peices for my box!!!

and goin lower muahahahhaa

and................ well youll see, z'd frame and a big notch.

then finish puting thats damn 5.3 and 4l80e in my 67

oh and finish the body work and sell my 88

ahhh crap I better get goin to the shop...........

70c10swb · 01-13-2007, 06:09 PM

Quote:

Originally Posted by cooters

sorry about that, the floor with braces is on the goodmark site for 499.99. Pic is on the site as well.

Slammed66 · 01-13-2007, 09:22 PM

Hey any one else in alberta or canda for that matter scotts will have the floor with braces in stock in a couple weeks!!

Jvan · 05-30-2007, 05:34 PM

Can this be used in a Blazer as well as the pickup? Has anyone tried it and what would need to be modified?

LUV2XCLR8 · 05-30-2007, 05:38 PM

May have to reconsider a cab I was looking at, that piece looks great

1970bowtie · 05-30-2007, 06:27 PM

Quote:

Originally Posted by 67ChevyRedneck

I thought that by the title this was going to be a "my goodmark floor is a piece of.... " thread

Lookin good so far. I'd recomend rehanging your doors before final welding, just to be safe... good luck and keep us posted!

me too lol

70c10swb · 05-30-2007, 08:04 PM

any venders have the piece with the braces yet? Will it still be 499 through the venders or cheaper?

Ram-Man · 05-30-2007, 09:48 PM

I ordered a floor with supports last week and got a full update from Goodmark. They told me that they have only received a couple of the floors with supports to test fit. The GA warehouse does not expect them until July 7th.

CA may get some sooner but the cost to transport to me would be alot higher. So I can only wait I guess.

syncrov69 · 10-16-2007, 12:19 PM

I don't see the floor with bracket at goodmark. Any updated news on this!

72BlckButy · 10-16-2007, 01:30 PM

Great work classichev! You've restored our faith in repop companies!

energiesource · 10-16-2007, 02:37 PM

yeah i gotta redo my floor. i saw some panels and some of them looked pinched around the bevels and stuff so i didnt know if this would be the same

01-10-2007, 10:40 PM	#28
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: GoodMark floor, what a peice!!!! Well pretty much got it all done, just have to flip the cab and do some welding on the bottom. I would HIGHLY recommend the floor, I just wish it would come with instructions, would have saved me a day or two. Her are a couple shots of the upper portion of the floor I needed to replace While I was at it I welded up a few holes in the firewall, cut in A/C ducts so i can get rid of at least one A/C setup. Also welded up some of the seams, still debating on the roof seam. Now I have to push it to the side so I can make some mare money building cabinets. Darren __________________ 67- 72 Parts collecter

01-11-2007, 12:43 AM	#29
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: GoodMark floor, what a peice!!!! Its nice to know that Alberta will be getting yet another classic Chevy. Pauls advertises the complete floor with braces and it also has rocker insides for 499. The picture is on their website.

01-11-2007, 12:49 AM	#30
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: GoodMark floor, what a peice!!!! When i was at Sema i asked Dynacorn if they had plans for a complete cab, not yet but will be looking at it in the future. Lots of red tape apperantly.

01-11-2007, 02:39 AM	#31
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: GoodMark floor, what a peice!!!! beautiful. __________________ -1947 3100 -1968 C10 -1970 K20

01-11-2007, 10:20 AM	#32
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: GoodMark floor, what a peice!!!! Looks great - thank you for the pictures!! __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

01-11-2007, 10:41 AM	#33
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: GoodMark floor, what a peice!!!! Lookin Good, can't wait til they have a complete cab available though __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

01-11-2007, 05:34 PM	#34
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: GoodMark floor, what a peice!!!! someone said before that pauls has a complete floor with braces for like 499? can i get a linky? i couldnt seem to find it. only one i found was on the goodmark site. __________________ -1947 3100 -1968 C10 -1970 K20

01-12-2007, 01:33 PM	#35
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: GoodMark floor, what a peice!!!! here's what I found. http://www.gmcpauls.com/Patch_Panels.htm __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

01-12-2007, 02:22 PM	#36
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: GoodMark floor, what a peice!!!! sorry about that, the floor with braces is on the goodmark site for 499.99. Pic is on the site as well.

01-12-2007, 02:54 PM	#37
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: GoodMark floor, what a peice!!!! ok.. now were on the same page. __________________ -1947 3100 -1968 C10 -1970 K20

01-12-2007, 11:12 PM	#38
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: GoodMark floor, what a peice!!!! Hey Darren , I just got internet at my place, That friggin rocks man , glad to see it worked out so well, I have a customer down here that wants floors supports and rockers , this seems like a way better way. Keep up the good work. __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

01-13-2007, 01:02 PM	#39
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: GoodMark floor, what a piece!!!! Matt, if you see Scott in the next little while, tell him it was a success, and try to sell them instead of the POS patch panels he has. Besides trying to find well over a 100 spot welds, it went well. __________________ 67- 72 Parts collecter

01-13-2007, 01:05 PM	#40
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: GoodMark floor, what a piece!!!! Hmm IM going to see him right now actually lol Im goin fleet side this year and I need some peices for my box!!! and goin lower muahahahhaa and................ well youll see, z'd frame and a big notch. then finish puting thats damn 5.3 and 4l80e in my 67 oh and finish the body work and sell my 88 ahhh crap I better get goin to the shop........... __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

01-13-2007, 09:22 PM	#42
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: GoodMark floor, what a piece!!!! Hey any one else in alberta or canda for that matter scotts will have the floor with braces in stock in a couple weeks!! __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

05-30-2007, 05:34 PM	#43
Jvan Registered User Join Date: Jan 2007 Location: chappaqua, NY Posts: 43	Re: GoodMark floor, what a piece!!!! Can this be used in a Blazer as well as the pickup? Has anyone tried it and what would need to be modified?



Register or Log In To remove these advertisements.

05-30-2007, 05:38 PM	#44
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: GoodMark floor, what a piece!!!! May have to reconsider a cab I was looking at, that piece looks great __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-30-2007, 08:04 PM	#46
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	Re: GoodMark floor, what a piece!!!! any venders have the piece with the braces yet? Will it still be 499 through the venders or cheaper? __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

05-30-2007, 09:48 PM	#47
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	Re: GoodMark floor, what a piece!!!! I ordered a floor with supports last week and got a full update from Goodmark. They told me that they have only received a couple of the floors with supports to test fit. The GA warehouse does not expect them until July 7th. CA may get some sooner but the cost to transport to me would be alot higher. So I can only wait I guess. __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

10-16-2007, 12:19 PM	#48
syncrov69 Registered User Join Date: Aug 2007 Location: Laval, Québec, Canada Posts: 175	Re: GoodMark floor, what a piece!!!! I don't see the floor with bracket at goodmark. Any updated news on this! __________________ '71 Custom/10 Deluxe LWB '71 Custom/30 Deluxe Dually

10-16-2007, 01:30 PM	#49
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: GoodMark floor, what a piece!!!! Great work classichev! You've restored our faith in repop companies! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-16-2007, 02:37 PM	#50
energiesource Registered User Join Date: Apr 2007 Location: Edmonton, AB, CAN Posts: 346	Re: GoodMark floor, what a piece!!!! yeah i gotta redo my floor. i saw some panels and some of them looked pinched around the bevels and stuff so i didnt know if this would be the same

Register or Log In To remove these advertisements.