TX Parting These Three Trucks

[chewychevy67]

sending PM.

[lynnfield]

Leroy-B1, I'll get pics of those for you and Eric tomorrow, I think I have a good inner and outer, let me check.........

Shaun1162, yes they are there, $25 shipped for the dual horns, $35 shipped for the horns & wire

[DaHos]

Originally Posted by lynnfield

DaHos, I'll get more pics of the cab posted, I wouldn't know where to start on the shipping, got you in line for the other parts.

Interested in the 67 as complete as possible (still have the doors?), as far as shipping goes if you can get it on a pallet we can work out the details, Thx, D'

[Shaun1162]

Originally Posted by lynnfield

Leroy-B1, I'll get pics of those for you and Eric tomorrow, I think I have a good inner and outer, let me check.........

Shaun1162, yes they are there, $25 shipped for the dual horns, $35 shipped for the horns & wire

Have you had a chance to test them? If they work I'll definatley take them.

[71blksuper4x4]

Glove box door from the cst? Trevor
Posted via Mobile Device

[lynnfield]

DeadheadNM, sending PM........in a minute..........if I can.....

WETOWM, yes, in the morning is ok? Just checked with my buddy about the bedside, he still doesn't know if he will be making that trip yet. Local shippers guestimates have been ugly. Meant to reply to your email earlier, sorry, my fault.

[lynnfield]

Shaun1162, I have not, but I will. With or with out the wire?

71blksuper4x4, Trevor, are you wanting it without the emblem? I had someone inquiring about just the CST emblem already.

[WETOWM]

Sound good thanks . One will turn up sooner or later close to me ! I hope lol

[Rochlow]

How much for the valve covers on the green CST shipped to 05478

[orange 69]

[QUOTE=lynnfield;5419371]Ok, pics are posted, kids are in bed........
orange 69, I can look at the tailgate again, but I am pretty sure it was junk. I have a blue one on another truck if you are interested. Let me know I'll post some pics.


When you have time pics would be great!

[71blksuper4x4]

I am just needing the door. I am debating painting a truck dark gold and wanted something I could wax and see its shine. Trevor
Posted via Mobile Device

[chewychevy67]

i will take the 67 dana 44 pending the drums are safe to turn and the backing plates are in good condition. i need these pieces too if possible. the little dust plate that is on the axle that bolts on with the backing plate 4 bolts. the bearings have to ocme off the axle to get them off. mine are wore out casse my bearings wore out. Rod.

[mcbassin]

Greg,
What's the story on the cab(s)? How bad is the rust?

[screaminchevypickup]

Originally Posted by mcbassin

Greg,
What's the story on the cab(s)? How bad is the rust?

I was wondering the same!!
Posted via Mobile Device

[FLchevygrl]

hello,
I'm interested in either a 2bbl or 4bbl carb. How much? and can I get the numbers off of them? Shipping to 34243
I also am interested in the edelbrock intake...is that off a 350?
please get back to me
So put in line pending price and shipping to me.

thanks,
Betty

[deezilboy]

Looking for one of these. Goes from the ear on top of fresh air door to a hole in the cowl under the passenger side windshield wiper. Only A/C trucks have them. Thanks!

[gmc 2500 4x4]

thanx lynnfield,

[danny6892002]

how much for the lower trim on the 72 and how good is the grill on the 70 to 78552

[ZOOKEENEY]

Has the core support for the 67 sold? Is core support rusted out? I live in Brownwood and could come up this weekend and get it. 325-642-7949

[Shaun1162]

Originally Posted by lynnfield

Shaun1162, I have not, but I will. With or with out the wire?

OK, sounds good, and I'll take the wire as well.

[lynnfield]

chewychevy67, the drums are junk..........BAAAAAD. The brake hardware, backing plates and other parts are good. The pulley on the P/S pump from the pic is bent, I have another if that's ok. Let me know what you want to do. Greg

[lynnfield]

gmc 2500 4x4, core support, is clean except for a small area on the top lip where the battery sits, I have a piece that I will include to use for a patch. I was able to save the mounting hardware including the lock tabs. The wire harness has been chewed on a bit by the local wild life, not terrible, just around a couple of the light connectors. Also, one burned wire, the resistor wire. Other that that it's pretty much all there as far as I can see. There was one green door panel, and it's was in poor shape. Wire harness, if you want it $30, and I figure the shipping on the core support would probably be in the $80 range. I can see if a local body shop has a box for the grill, if you are still interested in that. Greg

[lynnfield]

Core support will be bare for shipping.

[lynnfield]

More core support

[lynnfield]

Top battery area on the core support. Also, thought I should post a pic of the back of the grille. The coating is flaking off, and there is some pitting, but it can all be cleaned and painted.