LWB Fleetside to SWB Stepside in Sweden

[ibrown50]

Here are the sizes of the cross sills (in millimetres), you will see from the first picture there are quite a few holes in them, if you can ship some into Sweden at a reasonable cost it will probably be quicker to buy them

[Sweden64]

Originally Posted by ibrown50

Here are the sizes of the cross sills (in millimetres), you will see from the first picture there are quite a few holes in them, if you can ship some into Sweden at a reasonable cost it will probably be quicker to buy them

Attachment 1506512

Attachment 1506514

Attachment 1506515

Attachment 1506516

Attachment 1506519

Thanks!!! In millimeters to, thats something
I Will check out the shipping Coast to sweden....
Or IF i want to go the cheap way i can use a tubings
/C

[mjh1965]

Welcome aboard . There are quiet a few C10's in the UK I even managed to buy a second hand door at a swop meet a few years ago . Last year I also purchased a cab over here in the UK . So bear that in mind there are a few good shows and swop meets , it may be worth a trip .

[60chevyjim]

the mounts on your frame use metal cup motor mounts for a 79 chevy truck.
the loose rubber mount you have there is for a 72 or older car .
the ones you need look like this

http://www.summitracing.com/parts/oe...xsQaAnIB8P8HAQ

[Captainfab]

What you need are the style of 'clamshells' in the link that 60chevyjim posted. Those are very common and I would be surprised if you can not find them in Sweden. They are used on all GM trucks from '73 and up thru about 2000. Also used in all Chevy cars from about '73 and up as well. It is possible that the center to center measurement of the engine mounts on the frame brackets is not correct. Just something to check before you try and set the engine in place. They appear to be correct, but it is worth checking.

[ibrown50]

I think I have a pair of those "clamshells" let me check at the weekend

[Sweden64]

Thanks for informative answers!! Perfect, i will check if I can get them here.
I will fly to US in a couple weeks but on that trip I will load up my suitcase with body parts (Wife is so happy)

/C

[mjh1965]

Originally Posted by Sweden64

Thanks for informative answers!! Perfect, i will check if I can get them here.
I will fly to US in a couple weeks but on that trip I will load up my suitcase with body parts (Wife is so happy)

/C

If you look through my thread you will be amazed at what you can get in a case Front discs ,drop spindles , calipers , power steering box plus much more and that was on one trip . Extra case cost is still cheaper than shipping and import duty .

[Ta2Don]

Here's some pics and measurements... Hope this helps, I didn't think to measure the brackets location on the cross sill at first, but will get those and post soon...

Untitled by Donald Olivo, on Flickr
Untitled by Donald Olivo, on Flickr
Untitled by Donald Olivo, on FlickrUntitled by Donald Olivo, on Flickr
Untitled by Donald Olivo, on Flickr

The hole on the bracket is centered at 9 inches from either end and 31.75 inches center to center between the brackets.
Untitled by Donald Olivo, on Flickr

If I can be of further assistance, don't hesitate to ask...

[Sweden64]

Thanks Ta2Don!!

Are those brackets mounted on all cross sills??

I will post a picture on how its looks now.

/C

[Sweden64]

My brother made some new brackets for me so i can install the rear end from
the Pontiac
/C

[Ta2Don]

As far as Mine, just on that front one.

[ibrown50]

The brackets are on all 3 of my cross sills

[Sweden64]

Hi Guys

I´m back after the summer :-)
(Long time since summer)
Anyway, I have started working on my truck again and I will post some pictures of what i have been doing

I need a lot of body parts, fron+rear fender, tailgate......... where is the best place to buy??

How much can I lower it before I have to c-notch the frame?

My brother in law came and helped me welding the frame

[Sweden64]

I got an G20 van for free so i took the the engine and tranny from it.
I started the engine upp before i took it out and it run perfect

[Sweden64]

I had to fab a new cross member for the tranny.