OR Serpentine belt conversions - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 06-23-2012, 01:56 PM

Sold two still have two left. TTT

orngsikL · 06-23-2012, 03:10 PM

so how would I tell if this would fit on my 350?

orange 69 · 06-23-2012, 04:40 PM

Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.?

Bhelton · 12-13-2013, 01:46 PM

pm sent

laplander · 06-23-2012, 06:40 PM

Are you going to be getting anymore BBC ones?

**tll74** · 06-24-2012, 02:39 AM

Quote:

Originally Posted by orngsikL

so how would I tell if this would fit on my 350?

It will fit any 350. If your engine is 86 or older there will be one hole in the front of the passenger side cylinder head you will not have. I used and sold these w/o using this mounting hole with no problems. These use the "long" water pump with reverse rotation. The sample that I have pictured is bolted to a common 69-86 350 engine. It will not work with 68 and older cylinder heads as they do not have accessory holes.

Quote:

Originally Posted by orange 69

Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.?

If you don't have AC there is a idler pulley that takes the place of the AC pump. I may have this idler pulley in place of the AC pump. Yes it will fit the SB 400.

Quote:

Originally Posted by laplander

Are you going to be getting anymore BBC ones?

I may have one off a 95. I'll check monday and let you know.

Thanks to all, Tom

dbstepside · 06-26-2012, 08:14 AM

i would be intersted in a big block set as well.

DD1 · 07-01-2012, 10:32 AM

Hi, do you have any left? Also, where do I get the belt? If I want to use a local auto part store like auto zone, what would I ask for?

Also, I have an alternator and PS pump for a 350; would I be able to use those, or do I need to get the ones wit your kit?
Posted via Mobile Device

**tll74** · 07-01-2012, 01:37 PM

Yes I still have them. You would need to use the kit complete. Your alt and P/S will not fit. Thanks, Tom

**tll74** · 07-05-2012, 01:19 PM

ttt

huey-71 · 07-05-2012, 05:51 PM

PM sent

Lee H · 07-06-2012, 08:01 PM

As far as parts go just pick a year, 89-95 pick-up C1500 or K1500. All the parts (water pump, idler pulleys, power steering pump, alternator, A/C compressor, pulleys, drive belt) for these serpentine systems are interchangeable.

clb1024 · 07-06-2012, 08:27 PM

I'm subscribing. Would love to get a setuo to finish my 350, but the little one's 1st birthday is very close and we have to have a party. I'll definitely be hitting you up when I get the funds.

Thanks,
Chris
Posted via Mobile Device

huey-71 · 07-07-2012, 04:43 PM

Got your payment info, will send payment out Monday. Thanks again!

huey-71 · 07-09-2012, 05:49 PM

Payment went out today!!

SunSoaked · 08-09-2012, 02:59 PM

Tom,

Do you have a SB kit available? I'm interested in a kit but without the following:

-No fan or clutch (I'm using electric)
-No A/C Compressor (I'm using Sanden Comp)

I'm using an 87 (late model with two bolt attachment) power steering pump. It's hard to tell in your photo but I think its the same? I want to keep what I have as it's part of a hydroboost system and the pump is brand new. I will need the pulley for it though.

My block/heads are newer w/accessory holes.

Thoughts? Price?

Thanks, Mike

**tll74** · 08-10-2012, 02:34 AM

Quote:

Originally Posted by SunSoaked

Tom,

Do you have a SB kit available? I'm interested in a kit but without the following:

-No fan or clutch (I'm using electric)
-No A/C Compressor (I'm using Sanden Comp)

I'm using an 87 (late model with two bolt attachment) power steering pump. It's hard to tell in your photo but I think its the same? I want to keep what I have as it's part of a hydroboost system and the pump is brand new. I will need the pulley for it though.

My block/heads are newer w/accessory holes.

Thoughts? Price?

Thanks, Mike

Hi Mike, your 87 pump will not fot this bracket kit. The can (reservior) is timed wrong for the bracket. I could do it with a dual return pump assembly or just the reservoir to accomadate your hydro boost brakes. Also you could put your new pump in this reservior. The fan and clutch in these kits are basicly a gift as the value is in the AC, Alt, and brackets. I could take off 50.00 if I keep the AC pump.
Thanks, Tom

jrdv · 08-10-2012, 04:56 PM

I am interested in one, but I have a 4x4. How did your friends 2wd shroud work out?

71meangreenc10 · 08-10-2012, 06:52 PM

Is the ps pump used?

Smitty

**tll74** · 08-10-2012, 09:29 PM

Quote:

Originally Posted by laplander

Are you going to be getting anymore BBC ones?

Just got a BBC set up. 325.00 plus shipping

Quote:

Originally Posted by dbstepside

i would be intersted in a big block set as well.

Same as above Lets give laplander a chance to respond.

Quote:

Originally Posted by jrdv

I am interested in one, but I have a 4x4. How did your friends 2wd shroud work out?

Humm...good question. I'll find out.

Quote:

Originally Posted by 71meangreenc10

Is the ps pump used?

Smitty

Yes the pump is used.

Thanks Guys, Tom

dbstepside · 08-12-2012, 12:19 AM

if it gets to me i'd be intersted in the bbc set. also could you put pics of the current setup and also let me know what year it's from.

dbstepside · 08-12-2012, 12:24 AM

also shipping to 42071 if needed i could use a business address.

**tll74** · 08-12-2012, 01:35 AM

Quote:

Originally Posted by dbstepside

also shipping to 42071 if needed i could use a business address.

The sbc kits run about 60.00 shipping. The bbc kits have cast iron brackets so it will weight more therfor shipping will be more, I'm guessing about 75.00. This will be off a 94-95 454. I can get pics Monday. I actually have two of these so if you want one it's yours. Thanks, Tom

dbstepside · 08-15-2012, 09:56 AM

any pics of a bbc setup, also what style p/s pump comes with this kit? also would you happen to have the air comp. delete pulley if so would setup be less $ without the compressor?

rushingg149 · 08-15-2012, 04:24 PM

I'm looking for a set to put on a 1970 Chevy 1 ton with a 396 BB. What do you have that would work?

06-23-2012, 01:56 PM	#1
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Serpentine belt conversions Sold two still have two left. TTT __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

06-23-2012, 03:10 PM	#2
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Serpentine belt conversions so how would I tell if this would fit on my 350? __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

06-23-2012, 04:40 PM	#3
orange 69 Registered User Join Date: Aug 2011 Location: Benton Arkansas Posts: 129	Re: Serpentine belt conversions Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.? __________________ Thanks Joe Hester

12-13-2013, 01:46 PM	#4
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Serpentine belt conversions pm sent

06-23-2012, 06:40 PM	#5
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: Serpentine belt conversions Are you going to be getting anymore BBC ones?

06-26-2012, 08:14 AM	#7
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: Serpentine belt conversions i would be intersted in a big block set as well.

07-01-2012, 10:32 AM	#8
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: Serpentine belt conversions Hi, do you have any left? Also, where do I get the belt? If I want to use a local auto part store like auto zone, what would I ask for? Also, I have an alternator and PS pump for a 350; would I be able to use those, or do I need to get the ones wit your kit? Posted via Mobile Device

07-01-2012, 01:37 PM	#9
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Serpentine belt conversions Yes I still have them. You would need to use the kit complete. Your alt and P/S will not fit. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

07-05-2012, 01:19 PM	#10
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Serpentine belt conversions ttt __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

07-05-2012, 05:51 PM	#11
huey-71 Registered User Join Date: Mar 2012 Location: Panama City, Fl Posts: 27	Re: Serpentine belt conversions PM sent

07-06-2012, 08:01 PM	#12
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Serpentine belt conversions As far as parts go just pick a year, 89-95 pick-up C1500 or K1500. All the parts (water pump, idler pulleys, power steering pump, alternator, A/C compressor, pulleys, drive belt) for these serpentine systems are interchangeable. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

07-06-2012, 08:27 PM	#13
clb1024 Registered User Join Date: Mar 2012 Location: Middleburg, FL Posts: 210	Re: Serpentine belt conversions I'm subscribing. Would love to get a setuo to finish my 350, but the little one's 1st birthday is very close and we have to have a party. I'll definitely be hitting you up when I get the funds. Thanks, Chris Posted via Mobile Device __________________ Favorite quote: "I'm sick and tired of being sick and tired B¡±@h!" - Drunk guy in one of my accounts Rides: 67 Chevy C10 LWB Stake Bed(in bad shape) 04 Miti Endeavor AWD(wife's ride) 76 Dodge D100 Club Cab(Hand-me down from my Grandfather)

07-07-2012, 04:43 PM	#14
huey-71 Registered User Join Date: Mar 2012 Location: Panama City, Fl Posts: 27	Re: Serpentine belt conversions Got your payment info, will send payment out Monday. Thanks again!

07-09-2012, 05:49 PM	#15
huey-71 Registered User Join Date: Mar 2012 Location: Panama City, Fl Posts: 27	Re: Serpentine belt conversions Payment went out today!!

08-09-2012, 02:59 PM	#16
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: Serpentine belt conversions Tom, Do you have a SB kit available? I'm interested in a kit but without the following: -No fan or clutch (I'm using electric) -No A/C Compressor (I'm using Sanden Comp) I'm using an 87 (late model with two bolt attachment) power steering pump. It's hard to tell in your photo but I think its the same? I want to keep what I have as it's part of a hydroboost system and the pump is brand new. I will need the pulley for it though. My block/heads are newer w/accessory holes. Thoughts? Price? Thanks, Mike



Register or Log In To remove these advertisements.

08-10-2012, 04:56 PM	#18
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: Serpentine belt conversions I am interested in one, but I have a 4x4. How did your friends 2wd shroud work out? __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

08-10-2012, 06:52 PM	#19
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Serpentine belt conversions Is the ps pump used? Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

08-12-2012, 12:19 AM	#21
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: Serpentine belt conversions if it gets to me i'd be intersted in the bbc set. also could you put pics of the current setup and also let me know what year it's from.

08-12-2012, 12:24 AM	#22
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: Serpentine belt conversions also shipping to 42071 if needed i could use a business address.

08-15-2012, 09:56 AM	#24
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: Serpentine belt conversions any pics of a bbc setup, also what style p/s pump comes with this kit? also would you happen to have the air comp. delete pulley if so would setup be less $ without the compressor?

08-15-2012, 04:24 PM	#25
rushingg149 Registered User Join Date: Oct 2011 Location: Commerce, TX Posts: 75	Re: Serpentine belt conversions I'm looking for a set to put on a 1970 Chevy 1 ton with a 396 BB. What do you have that would work?

Register or Log In To remove these advertisements.