F/S OE C & K Auto Trans Shift Linkage Setups For SBC & BBC

[1971 Cheyenne]

Hi Mel,

I'll take a BBC/TH400 linkage, if you have one available. Shipping will be to 97703.

Thanks,

Brian

[Classic Bowties]

Originally Posted by 1971 Cheyenne

Hi Mel,

I'll take a BBC/TH400 linkage, if you have one available. Shipping will be to 97703.

Thanks,

Brian

Hello Brian, here is the BBC TH400 auto trans linkage setup that we can get headed your way, the complete big block shift linkage setup is $100. + $21.90 sent via USPS Priority large box flat rate shipment anywhere in the CONUS. The payment options are listed in top post of thread and we tried sending you our info for making payment on Sat. 06/05 but your inbox is full and not receiving, please confirm your full shipping address and we'll get the parts ready to go out. Thank you, Mel
.

[1971 Cheyenne]

Originally Posted by Classic Bowties

Hello Brian, here is the BBC TH400 auto trans linkage setup that we can get headed your way, the complete big block shift linkage setup is $100. + $21.90 sent via USPS Priority large box flat rate shipment anywhere in the CONUS. The payment options are listed in top post of thread and we tried sending you our info for making payment on Sat. 06/05 but your inbox is full and not receiving, please confirm your full shipping address and we'll get the parts ready to go out. Thank you, Mel
.

Thanks for the notification on the full inbox.

Just sent you a PM with the details.

Thanks,

Brian

[Classic Bowties]

Originally Posted by 1971 Cheyenne

Thanks for the notification on the full inbox.

Just sent you a PM with the details.

Thanks,

Brian

Hey Brian, your sent funds have been received, we will confirm your shipment/tracking info after the parts are packaged and shipped out. Thanks, Mel

[Classic Bowties]

Originally Posted by Eagle9502

Mel, I'll take a 4wd complete set up if you have one available. Let me know. Thanks.

We sold all of the 4wd shift linkage setups that we had on hand, currently working on getting some more "K" setups put together and will update the thread once complete/ready to ship. Thanks for the inquiry, Mel

[Eagle9502]

Originally Posted by Classic Bowties

We sold all of the 4wd shift linkage setups that we had on hand, currently working on getting some more "K" setups put together and will update the thread once complete/ready to ship. Thanks for the inquiry, Mel

Mel, happen to have a spare 4x4 shift rod and swivel stud?

[Classic Bowties]

Originally Posted by Eagle9502

Mel, happen to have a spare 4x4 shift rod and swivel stud?

Sorry, we are unable to help on those items individually but if you're interested in a complete 4x4 setup, we could get the below pictured 4wd SBC/TH350 shift linkage set packaged up and headed your way, let us know/confirm in thread. Thanks, Mel
.

[Classic Bowties]

Originally Posted by 1971 Cheyenne

Hi Mel, I'll take a BBC/TH400 linkage, if you have one available.

Brian, your BBC/TH400 shift linkage setup has been shipped, the package went out via USPS priority on Mon. 06/07 and your expected delivery day is this Wed. 06/09. Thanks again for your order and let me know if we can help with any other 67-72 parts needs, Mel

[LostMy65]

Let me know if you ever come across a stock longbed driveshaft from a C10 12-bolt and a th350.

[Eagle9502]

Mel, I'll take a 4wd complete set up if you have one available. Let me know. Thanks.

[1320NUT]

Would like a set up for a 2wd thm350 1972 if available Thank You

[1972BackInBlackC10]

i have a big block with a th350 which set up would i need?

[Classic Bowties]

Originally Posted by 1320NUT

Would like a set up for a 2wd thm350 1972 if available Thank You

1320NUT, your funds sent Wed. 07/14 have been received and your address confirmed. Here are a few pictures of the complete 2wd SBC TH350-400 shift linkage setup that was packaged up and shipped off, your order went out via USPS priority on Thu. 07/15 and the expected delivery day is Mon. 07/19. Thanks again for the purchase and let me know if we can help with any other 67-72 parts needs, Mel
.

[71K5Randy]

I’d like a complete set for SBC 2wd w/TH350 if you have it available.

[Classic Bowties]

Originally Posted by 1972BackInBlackC10

i have a big block with a th350 which set up would i need?

That was not an OE engine/trans combo so not sure what direction to point you in, pending motor install position I would probably try and use the BBC linkage setup.

Originally Posted by 71K5Randy

I’d like a complete set for SBC 2wd w/TH350 if you have it available.

We should have everything pulled for that shift linkage combo besides the small trans mounted shift lever-link and spring setup, we can supply/include the link & spring in new repro as pictured above and earlier in thread. Will have a look tomorrow and confirm back here in thread, Mel

[Classic Bowties]

Originally Posted by 71K5Randy

I’d like a complete set for SBC 2wd w/TH350 if you have it available.

Randy, here is the complete 2wd SBC TH350-400 shift linkage setup that we can get headed your way, note pics showing the substituted new repro trans shift lever-link and spring setup that will be included with linkage set, this setup also has a new pivot bushing and new linkage rod clip installed. Thanks for the inquiry and if interested our payment options are listed in the top post of thread. Thanks, Mel
.

[Classic Bowties]

Originally Posted by 71K5Randy

I’d like a complete set for SBC 2wd w/TH350 if you have it available.

Originally Posted by Classic Bowties

Randy, here is the complete 2wd SBC TH350-400 shift linkage setup that we can get headed your way, note pics showing the substituted new repro trans shift lever-link and spring setup that will be included with linkage set, this setup also has a new pivot bushing and new linkage rod clip installed. Thanks for the inquiry and if interested our payment options are listed in the top post of thread. Thanks, Mel
.

Hey Randy, our payment info for sending of funds has been returned Sat. 07/17 on the 2wd SBC TH350-400 shift linkage setup pictured in above post #49. Please confirm your full shipping address and we'll get the parts ready for shipment. Thank you, Mel

[71K5Randy]

Originally Posted by Classic Bowties

Hey Randy, our payment info for sending of funds has been returned Sat. 07/17 on the 2wd SBC TH350-400 shift linkage setup pictured in above post #49. Please confirm your full shipping address and we'll get the parts ready for shipment. Thank you, Mel

Mel,
Payment sent via Venmo, and I sent a PM with my shipping address.
Thanks,
Randy

[Classic Bowties]

Originally Posted by 71K5Randy

Mel,
Payment sent via Venmo, and I sent a PM with my shipping address.
Thanks,
Randy

Randy, your order for the complete 2wd SBC TH350-400 shift linkage setup has been shipped, the package went out via USPS priority on Mon. 07/19 and the expected delivery day is this Thu. 07/22. Thanks again for the purchase and let me know if we can help with any other 67-72 parts needs, Mel

[Eagle9502]

I'll take it. Replying to your PM.

[Classic Bowties]

Originally Posted by Eagle9502

I'll take it. Replying to your PM.

Okay you got this pictured K shift linkage setup, the info for sending of funds has been returned Wed. 12/15. Thanks, Mel

[Classic Bowties]

Originally Posted by Eagle9502

I'll take it. Replying to your PM.

Your K/4wd auto shift linkage setup has been shipped off, the package went out via USPS priority on Fri. 12/17 and the expected delivery day is Tue. 12/21. Thanks again for your order and let me know if we can help with any other 67-72 parts needs, Mel

[desertnick69]

Do you still have the 2wd SBC TH350-400 shift lever set-up available?

[Classic Bowties]

Originally Posted by desertnick69

Do you still have the 2wd SBC TH350-400 shift lever set-up available?

desertnick69, here are a few pictures of the complete 2wd SBC TH350-400 shift linkage setup that we can get packaged up and headed your way, if interested the payment info/options are listed in the top post of thread. Thanks for the inquiry, Mel
.

[Classic Bowties]

Originally Posted by desertnick69

Do you still have the 2wd SBC TH350-400 shift lever set-up available?

desertnick69, it has now been a few days since the complete 2wd SBC TH350-400 shift linkage setup (pictured post #59) was pulled out and offered to you, were you still needing? Please confirm interest or a pass. Thank you, Mel