OK 72 Cheyenne Super Lwb part out

[Jake1971]

Hey Joey, I am still interested in the red fender and overload springs including the bolts, brackets, and plates from the rear axle in your other part-out thread titled "1967 LWB Partout & 69 front clip" at http://67-72chevytrucks.com/vboard/s...d.php?t=631983





Let me know total including shipping to 78602 or nearest Greyhound Station at AUSTIN GREYHOUND STA 916 E KOENIG LN Austin, TX 78751.

[68 CRACKERBOX]

Originally Posted by joey8383

There's been a lot of local interest for all these things. I have it listed on Craigslist as well.
Bed $150
gate $50
doors $40 for driver door (bare) I need the wing window and outter handle on drivers door for mine and maybe the latch. There's a bubble on driver door lower right corner. Gate is so so. It has some filler 1/8" thick above handle. I can get better pics tonight if I get home before dark.
Passenger door I need to check thoroughly but I think it's rust free. $75

I'm interested let me know what the right door is like.

[DeadheadNM]

Originally Posted by joey8383

$16 shipped in a flat rate small box or padded envelope. LMK if interested and I'll pull it and clean it up for pics. Thanks--

I'll take it if not too beat up - could I see a pic once removed? Thanks, Pete

[undertaker72]

Originally Posted by joey8383

Passenger glass is missing. Driver mirror is GONE. Both vent shades are there. No guarantee on the getting them clips off but I can try for you. LMK if interested in just the vent shades or shades with passenger mirror frame.

thanks I think ill pass , good luck with your sale

[joey8383]

Jake my apologies. I thought you passed on overloads. There are a couple very stubborn bolts that I will have to heat. Need to go get my bottles refilled on torch set. Do you ever go to dallas? I will be there July 13th- 16th.

[joey8383]

Originally Posted by DeadheadNM

I'll take it if not too beat up - could I see a pic once removed? Thanks, Pete

Will get it pulled this weekend. Will post pics here.

[Dirt's72]

Originally Posted by joey8383

Black pad. Let me check for a set of clean bezels. I have a few but let me make sure I can come up with a nice set

I'll take the black pad and if you come up with the bezels let me know.
Thanks.

[68 CRACKERBOX]

Originally Posted by joey8383

There's been a lot of local interest for all these things. I have it listed on Craigslist as well.
Bed $150
gate $50
doors $40 for driver door (bare) I need the wing window and outter handle on drivers door for mine and maybe the latch. There's a bubble on driver door lower right corner. Gate is so so. It has some filler 1/8" thick above handle. I can get better pics tonight if I get home before dark.
Passenger door I need to check thoroughly but I think it's rust free. $75

I'm interested in all of it ,just need to know what the doors are like. thanks.

[joey8383]

Dash pad and bezel boxed up. Will ship out tomorrow (Monday)
Here are more pics and more parts that were found.
Air cleaner, fan, intake manifold, jack, valve covers that all look stock if somebody is building an original truck.

Both doors have small bubble on lower side. The metal is just a little bit soft there. They're builadable doors I just don't think they're worth shipping. Same on fenders, the cups are a TINY bit soft on inside of cup.


Found the glove box door in toolbox






Minor rust on cup inside. Not worth shipping


67 cab parts or patch panels. I'm keeping front clip.

[joey8383]

Originally Posted by 68 CRACKERBOX

I'm interested in all of it ,just need to know what the doors are like. thanks.

Are you going to be in Okla or are you talking about shipping the doors and stuff? If you're going to be in OKLA I can send you detailed pics of everything. Doors both have small bubble down low. Metal seems firm behind it but I would cut it out personally. Bed is ok but need to clean floor and check for rust. Gate is rough. Both fenders have minor rust on cups on the inside towards the engine bay that are a little soft.

[68 CRACKERBOX]

Originally Posted by joey8383

Are you going to be in Okla or are you talking about shipping the doors and stuff? If you're going to be in OKLA I can send you detailed pics of everything. Doors both have small bubble down low. Metal seems firm behind it but I would cut it out personally. Bed is ok but need to clean floor and check for rust. Gate is rough. Both fenders have minor rust on cups on the inside towards the engine bay that are a little soft.

yes i will be up there so can pick them up.no shipping.also interested in the air cleaner. thanks

[joey8383]

Originally Posted by 68 CRACKERBOX

yes i will be up there so can pick them up.no shipping.also interested in the air cleaner. thanks

Ok. Can you PM me a phone number or email address so I can send detailed pics?

[68C20]

Looking for a high hump transmission cover. I tried to look in your pics but never did see a shot of the transmission tunnel area.

[DeadheadNM]

Just following up the tailgate handle cover - thanks. Pete

[71GeneralMotorsCorp]

Interested In selling the rest of the whole truck(s)? If so, pm me.

[joey8383]

Jake and Pete- My apologies for the delay, we had a family emergency and I have been spending a lot of time with family.
I will get rear overloads pulled today and weighed and find out what Greyhound is going to charge to ship them.
I will also get tailgate handle cover off and send pics through PM.
I don't have a high hump tunnel and need one myself.
Crackerbox- Still need a phone number or email address or something to send detailed pics to. Preferably Email so I can send a lot of good pics.
Thanks-

[DeadheadNM]

Originally Posted by joey8383

Jake and Pete- My apologies for the delay, we had a family emergency and I have been spending a lot of time with family.
I will get rear overloads pulled today and weighed and find out what Greyhound is going to charge to ship them.
I will also get tailgate handle cover off and send pics through PM.
I don't have a high hump tunnel and need one myself.
Crackerbox- Still need a phone number or email address or something to send detailed pics to. Preferably Email so I can send a lot of good pics.
Thanks-

No worries at all - hope all going well now. No rush, these are just replaceable truck parts. Family first. Pete

[Jake1971]

Originally Posted by joey8383

Jake and Pete- My apologies for the delay, we had a family emergency and I have been spending a lot of time with family.
I will get rear overloads pulled today and weighed and find out what Greyhound is going to charge to ship them.
I will also get tailgate handle cover off and send pics through PM.
I don't have a high hump tunnel and need one myself.
Crackerbox- Still need a phone number or email address or something to send detailed pics to. Preferably Email so I can send a lot of good pics.
Thanks-

Originally Posted by DeadheadNM

No worries at all - hope all going well now. No rush, these are just replaceable truck parts. Family first. Pete

Pete speaks the truth. Family First. Take care of the family. Sending PM requesting pictures.

[ozziemex]

If you still have the bed, how much?

[Jake1971]

Hey Joey, hope the family is well.
TTT for you.

[det227]

If nobody has taken the seat belts yet I would like them.

[mcbassin]

Not sure if anyone has already asked, ? what is the condition of the front and rear window stainless trim?

[joey8383]

Thanks so much guys. My wife's 29 yr old sister was just diagnosed with stage 4 cancer that has spread to liver and abdomen. She just had a full Hysterectomy and has started chemo although they don't think it will respond to chemo..
No high hump tunnel- I need one myself
Pic of tailgate handle cover. It has a dent top and bottom. Maybe you can do something with it??? Just pay shipping if you wanna try.
Overloads and fender for $40 plus greyhound charges? The 40 will cover my fuel to tulsa and back. I shipped a Honda pilot door to LA a few months back and it cost $125 to give you an idea.
Mike the window trim looks good. There are a couple dings that I pointed out in pics. You should make the trip to Okmulgee America and take them home. ?? I may have some other Cheyenne Super stuff you need for Red. Got your badges?? I'd call these window trims driver quality 8/10. You can have them and anything else I'm not using if I can bug you with a few questions over the next couple years.





Trying to get tailgate handle pic to upload but having issues. Will get it up when I get inside to a computer.

[Jake1971]

Originally Posted by joey8383

Thanks so much guys. My wife's 29 yr old sister was just diagnosed with stage 4 cancer that has spread to liver and abdomen. She just had a full Hysterectomy and has started chemo although they don't think it will respond to chemo..
No high hump tunnel- I need one myself
Pic of tailgate handle cover. It has a dent top and bottom. Maybe you can do something with it??? Just pay shipping if you wanna try.
Overloads and fender for $40 plus greyhound charges? The 40 will cover my fuel to tulsa and back. I shipped a Honda pilot door to LA a few months back and it cost $125 to give you an idea.
Mike the window trim looks good. There are a couple dings that I pointed out in pics. You should make the trip to Okmulgee America and take them home. ?? I may have some other Cheyenne Super stuff you need for Red. Got your badges?? I'd call these window trims driver quality 8/10. You can have them and anything else I'm not using if I can bug you with a few questions over the next couple years. Trying to get tailgate handle pic to upload but having issues. Will get it up when I get inside to a computer.

Cancer? *Puts hands together*
I will take the fender and overloads package. PM PayPal info please. I will send some extra green your way. Paul

[DeadheadNM]

Sorry to hear and best wishes for remission.

I'll take the handle cover. Sending PM. Thanks, Pete