The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-28-2015, 04:48 AM   #26
ZacharyDouglas1992
Registered User
 
Join Date: Nov 2013
Location: Fowler California
Posts: 140
Re: 454 rebuild- 83 K3500

let me just start of by saying that you're right on all accounts. I could've gone more aggressive on the cam, and it would definitely benefit from exhaust lift/duration.

But, I have to adhere to pretty strict California smog laws, which means I had to take it easy on the cam, and I can't really mess with the timing at all which also would help with a more aggressive cam.

The springs in the heads can take much more lift, and for anyone else using this build For ideas, from the fun states without the nazi air resource board, definitely use a more aggressive cam and really open things up!

The reality of it for me, is that I have a towing vehicle with 4.56 gears, and the low end is where it really matters. It'll idle nice, last a long time, and tow my toys just fine. If I'm ever feeling like I'm lacking in top end, I'll just hop in my Chevelle and satisfy that need haha.

Thanks always for all the comments/suggestions/advice. That's what makes these threads useful to those seeking some advice.

And speaking of this thread. I checked on my rotating assembly yesterday. Should be done by the end of next week. Having my rods machined to use floaters instead of pressed for the Pistons. So that added a little time. But I'll be glad I did it, If nothing else when I have it apart next time, and I don't have all the Pistons ruined removing them.
__________________
1967 CHEVELLE MALIBU 427/700R4
1971 CHEYENNE 10 350/350
1983 GMC K3500 454/400/205
1987 R10 TBI 350/700R4
2014 CRUZE 2.0 TURBO DIESEL
ZacharyDouglas1992 is offline   Reply With Quote
Old 04-21-2015, 09:48 AM   #27
ZacharyDouglas1992
Registered User
 
Join Date: Nov 2013
Location: Fowler California
Posts: 140
Re: 454 rebuild- 83 K3500

Some progress finally! in the midst of moving I haven't had nearly the amount of time I would like to for this truck. But I'll never have "enough" time haha.
Attached Images
  
__________________
1967 CHEVELLE MALIBU 427/700R4
1971 CHEYENNE 10 350/350
1983 GMC K3500 454/400/205
1987 R10 TBI 350/700R4
2014 CRUZE 2.0 TURBO DIESEL
ZacharyDouglas1992 is offline   Reply With Quote
Old 10-08-2015, 12:49 PM   #28
ZacharyDouglas1992
Registered User
 
Join Date: Nov 2013
Location: Fowler California
Posts: 140
Re: 454 rebuild- 83 K3500

life is full of surprises and work has forced me to move 4 times since I tore this truck down. that being said, ive had time on weekends here and there to make slight progress. Here's the engine now. All but ready to drop in.
Attached Images
 
__________________
1967 CHEVELLE MALIBU 427/700R4
1971 CHEYENNE 10 350/350
1983 GMC K3500 454/400/205
1987 R10 TBI 350/700R4
2014 CRUZE 2.0 TURBO DIESEL
ZacharyDouglas1992 is offline   Reply With Quote
Old 03-02-2016, 03:24 PM   #29
ZacharyDouglas1992
Registered User
 
Join Date: Nov 2013
Location: Fowler California
Posts: 140
Re: 454 rebuild- 83 K3500

I have the 454 dropped into the truck now, and am starting to accomplish all the tedious tasks that go along with it. I've reinstalled the oil cooler sandwich adapter, new cooler lines, power steering pump, hydroboost lines, new water pump, new alternator, new smog pump and pulley, new idlers, tensioner, etc . That brings me to what I am about to ask...

Does anyone here have a thorough Vacuum line diagram for an 83 GMC K3500? I have the remnants of what is on my air cleaner but I don't think it addresses everything. Getting this thing to smog is going to be a PITA.
Attached Images
  
__________________
1967 CHEVELLE MALIBU 427/700R4
1971 CHEYENNE 10 350/350
1983 GMC K3500 454/400/205
1987 R10 TBI 350/700R4
2014 CRUZE 2.0 TURBO DIESEL
ZacharyDouglas1992 is offline   Reply With Quote
Reply

Bookmarks

Tags
454, big block chevy, rebuild, roller cam


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com