1965 C20 Dump truck

[straight6chevyguy]

So since the oil change I have driven the truck around the property a little bit and it does have a lot more power after cleaning/rebuilding the carburetor.
I just need to finish the truck bed and then I can haul some firewood!

So still a lot of work to be done on the truck but at least I am finally getting some where on it!

[TJ's Chevy]

292 in my 66 woke up alot after rebuilding the little 1 barrel....woke up even more when I did the 4 barrel and dual exhaust though. lol I need to get the new motor fired up soon or I'm gonna go nuts.

[straight6chevyguy]

Not much progress on the truck lately mostly just been trying to work bugs out of the engine. Had a small leak on the carburetor that I had to fix with gasket sealant (Yes I know it's not the best idea but it'll have to do for now)

Spent most of yesterday gaping the points, setting timing and fine tuning the carburetor and was able to drive it around for a while.

I'm hoping my coolant leak is fixed but I'm not for sure yet. Yesterday I looked at the oil cap and I saw a drop of water on it but I'm hoping it was just condensation or something....

I did run some stop leak in the engine yesterday so hopefully if there is a problem that will fix it... Hopefully....

All so on the problems list I don't think my vacuum advance is working.
I thought that it was but looking at it again I don't think it is. I'm pretty sure that I have it hooked up to the right vacuum port on the carb. so it must be something wrong on the distributor. So I'm going to have to figure that out sometime.

The real thing holding me back from getting what I really want done on the truck right now is money so it's just kinda a slow project for now.

All so guys I'm thinking of digging into my 76 c10 to see what doom awaits in that truck.... so be on the lookout for a build thread for that truck sometime soon!

[Johns 66]

Originally Posted by straight6chevyguy

Not much progress on the truck lately mostly just been trying to work bugs out of the engine. Had a small leak on the carburetor that I had to fix with gasket sealant (Yes I know it's not the best idea but it'll have to do for now)

Spent most of yesterday gaping the points, setting timing and fine tuning the carburetor and was able to drive it around for a while.

I'm hoping my coolant leak is fixed but I'm not for sure yet. Yesterday I looked at the oil cap and I saw a drop of water on it but I'm hoping it was just condensation or something....

I did run some stop leak in the engine yesterday so hopefully if there is a problem that will fix it... Hopefully....

All so on the problems list I don't think my vacuum advance is working.
I thought that is was but looking at it again I don't think it is. I'm pretty sure that I have it hooked up to the right vacuum port on the carb. so it must be something wrong on the distributor. So I'm going to have to figure that out sometime.

The real thing holding me back from getting what I really want done on the truck right now is money so it's just kinda a slow project for now.

All so guys I'm thinking of digging into my 76 c10 to see what doom awaits in that truck.... so be on the lookout for a build thread for that truck sometime soon!

Boy can I relate to getting the bugs out and the money it costs...…
Its funny when we use to have a leak we would put a tablespoon of grits in the radiator and soon....no more leak. Not real sure what that does to the motor but the leak was gone...lol

Itll come along, trust me I definitely know the feeling.

[straight6chevyguy]

Thanks for the encouraging words John.

[roll_the_dice]

Most of us don't have unlimited money to put into our projects...so we save and pinch pennies to get the parts we need. In my case, this is going to be my daily driver, so I can sell one of my cars when I finish...so spend money now on the truck then recoup it when I sell the car...it's a weird dynamic. Otherwise, it would be taking me more years than it already has and I am not doing a show truck, but doing it with show truck speed of build.

You're doing great!

[straight6chevyguy]

Thanks Andy...

Just a small update: I believe the vacuum advance is working after all.
I drove the truck with and without it hooked up and the truck seems to have more power with it hooked up so it must be working, right?
Not really sure what I was thinking maybe I was just looking for more movement from the arm on the dist. then is supposed to be there.

[straight6chevyguy]

I'm planing on getting the wood to finish the truck bed soon so be waiting for updates!

[straight6chevyguy]

Well here is some of the lumber... (there is some more that is not in the picture by the way)
Just the cheapest stuff I could get, the trucks going to be a work truck not a show truck. LOL

Now time to get to working on it!
I will be sure to take lots of pictures!

[straight6chevyguy]

Well, been working on it these past few days so here are the updates!

Cutting the plywood to size...

[straight6chevyguy]

Doing a test fit...

[straight6chevyguy]

Some painting...

[straight6chevyguy]

Getting it secured.

[straight6chevyguy]

I have started working on the tail gaits but am not done yet.

I'll have more pictures and updates coming soon...

[straight6chevyguy]

Almost have the tail gates done, just have to buy some more hardware today.

[straight6chevyguy]

It's been real warm lately so not as much progress as I would like but I'm still moving along.
Trying to remember to take pictures as I go along too.
I will try to have them up in a day or so.

[straight6chevyguy]

Been real busy with other things lately but I do have the tail gates done just have to install some sort of latches (to keep them closed LOL)
I will try to get those over due pictures on here soon.

[straight6chevyguy]

I know It's been a while but....finally updates.

[straight6chevyguy]

some more pic's.

[straight6chevyguy]

And more...
Please excuse the rusty washers on the hinges!
Was all I had on hand Lol but I plan on cleaning them up with a wire brush.
I'm not sure yet if I'm going to paint the hinges or leave them as is.

[straight6chevyguy]

I still have to decide what latches to use and do some more painting.
Been kinda taking a break from the truck lately but I plan on getting back on it soon!

[TJ's Chevy]

Looks nice!

[straight6chevyguy]

Thank you!
It's not going to win any prizes but its good enough for Me Lol.

[straight6chevyguy]

Wow, it's been a long time since I last posted!

I have not got to much done on the truck over the summer as I was sick off and on and had to work on the clutch on my other truck(98 chevy) and just got busy doing other things.

I was recently using the truck to haul firewood until the right front wheel cylinder started leaking.
I have the wheel and drum off but still need to remove the wheel cylinder and decide if I want to replace or rebuild it.

I will try to post more regularly as I get things done on the truck as there is still very much to do.

[straight6chevyguy]

here are some pic's.
In the last photo yes thats how I am keeping the tailgates closed, I still have to come up with latches.