1963 C-10 SWB BBW Fleetside in NC

[1963c-10]

Originally Posted by Ta2Don

Finally got a chance to check in…Glad you didn't lose it on the road...
Gotta say I am a bit envious… I'm looking for a BBW Fleet and found one not too far away, just gotta get the guy to come off the price a bit...

Yeah, you and me both. Thankfully I brought logging chain and binders...and lessoned learned to not use uhaul straps. I told the manager they need to replace both ratchets. I could go out there and pull the straps free by hand.

Hopefully you can work out a deal on the one near you too!!

[clemdaddy]

thats a nice truck. i've been looking for a 63 for a while now. i love the A pillar and how it makes all the angles match. from the side, the truck looks like its moving fast.

really like your truck, looking to see what you do. too bad your fayetteville is in a different state. i'd be over there.

[1963c-10]

Originally Posted by clemdaddy

thats a nice truck. i've been looking for a 63 for a while now. i love the A pillar and how it makes all the angles match. from the side, the truck looks like its moving fast.

really like your truck, looking to see what you do. too bad your fayetteville is in a different state. i'd be over there.

thanks, just glad i was able to work the title out...the interstate transfer are always more involved than in state. still working out which direction to go with it, but i have most of what it'l need to get it complete. yeah, too bad we're not closer, wouldn't mind the help or helping another local guy out with projects

[bj383ss]

I'm going to give it a try on the headers and my chains.

Bret

[Mater/10]

This looks like its going to be a Great build! Sweet score!

[1963c-10]

Originally Posted by Mater/10

This looks like its going to be a Great build! Sweet score!

Thanks. Will be next in line....gotta finish the other 63 1st. But I'm sure I'll find myself turning wrenches on both at the same time.

[ncsu]

Nice! Must be cool to look out your window and see 2 '63 short beds!

[1963c-10]

Originally Posted by ncsu

Nice! Must be cool to look out your window and see 2 '63 short beds!

Oh yeah...love walking out in the morning and seeing them both there!!

[b.sharp]

I have a '63 short bed but the cab is twisted in the driver side door. If I could fix it I would. I would like to have a knee knocker but I would also have to have a lot better doors.

[1963c-10]

Would a cab swap fix your issues....maybe just swap Vin tags? How bad is the cab twisted? Any pics

[b.sharp]

no pics right now. The door jamb is pushed up and in at the front bottom and twisted inward. I have a rough '63 GMC cab I could probably get some parts off of but it is beyond my skills to cut all this out and put it back in where it will work. The drivers door was toast and has been scrapped. The passenger door is fixable. I have extra sheet metal also. No title but I think I might be able to get it. I need to run the numbers because the po wrecked it prior to tranfering and lost the title during the wreck.

[1963c-10]

Yeah, I'd get the title process done before any work/time on it. I'm waiting on NC now and could take 2-6 weeks from what DMV tells me. You'd be surprised with a little practice what you could get done with a welder. Tons of help, threads and literature on this forum to get you through it. Or maybe even enlist some help from a local forum member. I know I've dealt with probably over a hundred on parts and quite a few in person. All have been great people and a few have come here to assist me also. Bluebomber came down from Cary last week...over an hours drive to ride another 2 hrs into SC to go pick up the newest 63...great member and friend for quite a few years. And he got drug to the circus when I took my 5yr old niece the night before we left.

[1963c-10]

Anybody ever seen one of these tags before? I found it on the driver side upper cross shaft. Its an aluminum tag and says CHEVROLET. I'll try and clean it up on the back side and see if theres anything else stamped on it. I've just never seen one before. My guess is maybe an assembly line tag that's normally removed? But purely just a guess. Any help is appreciated

[WhippinSaw]

Originally Posted by 1963c-10

Anybody ever seen one of these tags before? I found it on the driver side upper cross shaft. Its an aluminum tag and says CHEVROLET. I'll try and clean it up on the back side and see if theres anything else stamped on it. I've just never seen one before. My guess is maybe an assembly line tag that's normally removed? But purely just a guess. Any help is appreciated

I have a tag on mine that I was going to find out what it was for someday. Its on the passenger side tie=rod so I assumed it was quality control for the steering. This is the first time the subject came up, maybe others have them too. Has a number instead of chevrolet. (3813588)

[1963c-10]

Talked with a forum member who worked the assembly lines....he says its a quality control tag placed on by the assembly line. Says they are just normally removed or fall off at some point.

I know a tag is minor, but kinda cool that its still there 51 years later.

[Ta2Don]

Maybe minor, but very cool...

[1963c-10]

Originally Posted by Ta2Don

Maybe minor, but very cool...

I'll take it off when we get to the point of restoration and it'll go with the trucks documentation. I'll get some better pics when I take the front end back off in a few weeks and try and clean it up some.

[TJ's Chevy]

Boy am I jealous! LOL! Nice truck! Looks like a good one to put your 230 in if I may give the suggestion...or heck...maybe a cummins swap..

[1963c-10]

The 230 will be going when when it comes out of the stepside. I just plan to replace gaskets/freeze plugs, paint and install. Its been running reliable since I've had it in 2009, so I don't see any reason to play with it now. I know the motors getting a little tired, but it'll make it a few more miles yet.

[TheBlueBomber]

I can't believe it's been that long already... feels like it was just yesterday you were showing me pictures of it at Butner from your flip phone haha.

[1963c-10]

Originally Posted by TheBlueBomber

I can't believe it's been that long already... feels like it was just yesterday you were showing me pictures of it at Butner from your flip phone haha.

Yeah really. Sometimes I look at the trucks and the rooms filled with parts and wonder how its been 4 years and its not done. Then reality slaps me again and its 2 full time jobs and some part time work, barn build and 2 acres to manage. But I feel this is the year for the stepside to near completion. Parts are 95% there, need to figure out exhaust. And then just do the work.

[1963c-10]

Thanks for posting that WhippinSaw. I had hoped maybe some more would pop up. I need to clean the backside of the tag off to see if there is anything on there. Another member said he got a tag on a NOS part too, so it seems that either assembly line installed or factory replacement parts so far. Maybe post it in the main forum on the thread I started and see if we get any responses about it. There is a member who worked the assembly lines and seems to be a wealth of knowledge on stuff like this.

[64chevtruck]

Grats on the truck and Nice start on the build. I am looking for my second truck right now I cant wait to get a fleet going.

[1963c-10]

Thanks 64chevtruck.....we'll get it done eventually, but it'll have to wait for the stepside to be completed 1st

[1963c-10]

OK, well 1 step closer. Had a minor title glitch that NC didn't like. Was able to get the original owner of the truck....a lady in her late 80's or early 90's to get me a new issue title from SC. Its signed and notarized and heading this way. This will satisfy NC, so looks like I'll have my green light in about 2 weeks from NC to start work on this build. Great news and another obstacle overcome. I made sure to send her some money for her time as well as pay the $35 to SC for expedited service on the title. Talked with her this a.m. and I'll be sending he a card and a gift card for a nice restaurant too. The truck was hers from 1991 until a few years ago....swapped hands 2-3 times, but never retitled. So on paper its still a 3 owner truck. She was so willing to help because it was her personal truck.....she said she loved the truck and had kept touch with the other owners hearing that it was headed for scrap....then found out I had purchased it and saved it. She's equally glad it'll be back on the road. I asked if she had any old pics of the truck and she's going to look for me.