67 Camaro Build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 12-29-2017, 08:48 PM

Im not a big fan of Camaros but when you posted Grumps Camaro that brought back some fun memories. I think a 67/68 Camaro set up with the same stance and tire wheel combo would be really cool to bomb around in.

7dee2 · 01-02-2018, 11:45 AM

Quote:

Originally Posted by Dieselwrencher

Man, using the hoist is cheating, but I really like it.

Maybe I could use a drive on to lift bodies off just like you did?

Ha, you know it, we use this lift as a body/frame elevator, paint booth, project storage, etc. it continues to be a great tool!

Quote:

Originally Posted by CG

Im not a big fan of Camaros but when you posted Grumps Camaro that brought back some fun memories. I think a 67/68 Camaro set up with the same stance and tire wheel combo would be really cool to bomb around in.

I think so too, that's the plan, a rake with some Cragar SS’s. Pizza cutters up front and some sticky's in tha back!

Building a jig/body cart that won't fall apart and is next up.

gringoloco · 01-03-2018, 12:17 AM

Quote:

Originally Posted by 7dee2

You betcha Chris! Don’t know of any personally but this 69 popped up on KSL a couple of days ago, https://www.ksl.com/auto/listing/4339502?ad_cid=4 might be something? Oops, and it's gone just that fast!

That is where we found ours it was on KSL but they go really fast these days.

I called and texted on that as soon as I saw it. Poof, gone! We’ll keep looking.

Keep up the good work!

7dee2 · 01-06-2018, 12:51 PM

Bummer, that looked like it could have been a good'n! I’ll ask around and keep my eyes open for yah Chris, thanks.

Here's a little more jig/cart progress and then a planets are aligning kind of moment! Our new beauty tank has been on fumes and the second it was out our 10lb wire spool ran out also.

7dee2 · 01-08-2018, 11:18 AM

Some poly bushings, tub o’ grease and oil filter adaptor bolts showed up from Summit. Slid the subframe back under the car again with the new bushings prior to repairing the bad LR body mount hole. Toying with the idea of making our jig able to accept the subframe for front clip fitment later (?).

7dee2 · 01-10-2018, 12:23 PM

Placed an order a few days ago for some 13ga sheet after we were unable to source it locally. Speedy Metals was certainly spendy, Ha, I mean speedy

(compared to the cost of a new subframe this was way cheap)! https://www.speedymetals.com/pc-2681...eel-sheet.aspx

7dee2 · 01-12-2018, 11:37 AM

Tank swapped and more wire in the machine, our little Lincoln is a happy camper. Here’s the first layer of subframe repair.

7dee2 · 01-13-2018, 12:03 PM

Second layer.

gringoloco · 01-13-2018, 12:34 PM

Nice work on that. Way better than buying new

**Clyde65** · 01-13-2018, 06:34 PM

Well done! Always wanted to have a welding talent!

7dee2 · 01-15-2018, 10:56 AM

Quote:

Originally Posted by gringoloco

Nice work on that. Way better than buying new

Thanks Chris I agree, much better than buying new.

Quote:

Originally Posted by Clyde65

Well done! Always wanted to have a welding talent!

Thanks Clyde, it's coming along pretty good.

Flipped over for another pass, added some nice ugly weld on the end like the factory welds. Ha, thinking that'll do!

**Dieselwrencher** · 01-15-2018, 10:21 PM

Nice work. Much better than the rust hole before.

7dee2 · 01-17-2018, 10:22 AM

Thanks Ryan!

Hole’s been punched and subframe test fitted into the car, giving this particular repair a done stamp.

**rgunlock** · 01-17-2018, 12:02 PM

Nice repair Brett. You weren't kidding about leaving the ugly welds on the end

gringoloco · 01-17-2018, 09:53 PM

Looks factory, nice!

7dee2 · 01-19-2018, 11:08 AM

Quote:

Originally Posted by rgunlock

Nice repair Brett. You weren't kidding about leaving the ugly welds on the end

Thanks Rick, as a friend likes to say “bigger the glob better the job”!

Quote:

Originally Posted by gringoloco

Looks factory, nice!

Thanks Chris, since we're only fixing one mount Mr. Picky Pants (me?) wanted to hide the repair.

Back to the jig, mentioned this earlier making both the front and middle supports height adjustable in case we want to add the subframe with its mounts at some point and still level out the body shell. All thread pieces are slotted and cut as long as the tubes so they can be recessed flush but not fall in.

**Dieselwrencher** · 01-19-2018, 03:40 PM

That's a very nice body dolly! Can you make one for my Camaro and my 40 Ford so I don't have to?

7dee2 · 01-21-2018, 11:10 AM

Yepper, I’m thinking it’s gonna be nice! Hey Ryan, that is a good idea, but no..

Here’s how we’re anchoring the rear, using the old 2-piece frame bushings with the shoulders cut off for a closer flush mount. Then to the risers using the original shackles, it’s pretty dang snug and a bear to install but will hold the car very solid. Getting ready for a gusset party next!

7dee2 · 01-23-2018, 10:26 AM

1, 2 & 6, gusset parties over, good times… I’m thinking this is gonna work with the subframe!

7dee2 · 01-24-2018, 10:30 AM

Argh! Too much heat, pulled the uprights inward towards the gussets dangnabit!

The alignment holes up front don’t line up any more, it just barely fit through the subframe and the center support section was off by a knat’s a** of popping into its alignment holes. Cutting the tops off and am resetting them.

It's another Mr. Bean moment...

**rgunlock** · 01-24-2018, 11:17 AM

Sucks when that happens! Can you tack a bar across the top to hold your spacing while you reweld the gussets?

**Dieselwrencher** · 01-24-2018, 08:45 PM

That's just how it goes isn't it? Oh well, you'll get it fixed up.

bryant6 · 01-24-2018, 10:52 PM

Big project... what’s been done looks pretty good. I'm so jealous

7dee2 · 01-26-2018, 01:21 PM

Quote:

Originally Posted by rgunlock

Sucks when that happens! Can you tack a bar across the top to hold your spacing while you reweld the gussets?

Yeah, tacking a brace in place woulda, coulda, shoulda been a better idea. Or maybe leaving the cars weight on em?

Quote:

Originally Posted by Dieselwrencher

That's just how it goes isn't it? Oh well, you'll get it fixed up.

It’s always something!

Quote:

Originally Posted by bryant6

Big project... what’s been done looks pretty good. I'm so jealous

Thanks Bryan!

So, after cutting the four tops off, cleaning off all the not so old weld and trueing everything up again. With the weight of the car tacked them in place with lots of tacks then pulled and final welded them onto the uprights again. Once satisfied with the support to body fit again went ahead and welded up the rest of it. Yippy skippy, shell went right on without any drama this time!

**Dieselwrencher** · 01-26-2018, 06:31 PM

Nice! Is the body ready for paint yet?

12-29-2017, 08:48 PM	#26
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,000	Re: 67 Camaro Build Im not a big fan of Camaros but when you posted Grumps Camaro that brought back some fun memories. I think a 67/68 Camaro set up with the same stance and tire wheel combo would be really cool to bomb around in. __________________ … … … … … … … … ... … … … … … … … … … … …

01-06-2018, 12:51 PM	#29
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Bummer, that looked like it could have been a good'n! I’ll ask around and keep my eyes open for yah Chris, thanks. Here's a little more jig/cart progress and then a planets are aligning kind of moment! Our new beauty tank has been on fumes and the second it was out our 10lb wire spool ran out also. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-08-2018, 11:18 AM	#30
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Some poly bushings, tub o’ grease and oil filter adaptor bolts showed up from Summit. Slid the subframe back under the car again with the new bushings prior to repairing the bad LR body mount hole. Toying with the idea of making our jig able to accept the subframe for front clip fitment later (?). Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-10-2018, 12:23 PM	#31
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Placed an order a few days ago for some 13ga sheet after we were unable to source it locally. Speedy Metals was certainly spendy, Ha, I mean speedy (compared to the cost of a new subframe this was way cheap)! https://www.speedymetals.com/pc-2681...eel-sheet.aspx Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-12-2018, 11:37 AM	#32
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Tank swapped and more wire in the machine, our little Lincoln is a happy camper. Here’s the first layer of subframe repair. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-13-2018, 12:03 PM	#33
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Second layer. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-13-2018, 12:34 PM	#34
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 Camaro Build Nice work on that. Way better than buying new __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-13-2018, 06:34 PM	#35
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: 67 Camaro Build Well done! Always wanted to have a welding talent! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-15-2018, 10:21 PM	#37
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build Nice work. Much better than the rust hole before. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-17-2018, 10:22 AM	#38
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Thanks Ryan! Hole’s been punched and subframe test fitted into the car, giving this particular repair a done stamp. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-17-2018, 12:02 PM	#39
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: 67 Camaro Build Nice repair Brett. You weren't kidding about leaving the ugly welds on the end __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

01-17-2018, 09:53 PM	#40
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 Camaro Build Looks factory, nice! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-19-2018, 03:40 PM	#42
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build That's a very nice body dolly! Can you make one for my Camaro and my 40 Ford so I don't have to? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-21-2018, 11:10 AM	#43
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Yepper, I’m thinking it’s gonna be nice! Hey Ryan, that is a good idea, but no.. Here’s how we’re anchoring the rear, using the old 2-piece frame bushings with the shoulders cut off for a closer flush mount. Then to the risers using the original shackles, it’s pretty dang snug and a bear to install but will hold the car very solid. Getting ready for a gusset party next! Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-23-2018, 10:26 AM	#44
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build 1, 2 & 6, gusset parties over, good times… I’m thinking this is gonna work with the subframe! Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2



Register or Log In To remove these advertisements.

01-24-2018, 10:30 AM	#45
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,966	Re: 67 Camaro Build Argh! Too much heat, pulled the uprights inward towards the gussets dangnabit! The alignment holes up front don’t line up any more, it just barely fit through the subframe and the center support section was off by a knat’s a of popping into its alignment holes. Cutting the tops off and am resetting them. It's another Mr. Bean moment... Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube:** https://www.youtube.com/@6dee7-7dee2

01-24-2018, 11:17 AM	#46
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: 67 Camaro Build Sucks when that happens! Can you tack a bar across the top to hold your spacing while you reweld the gussets? __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

01-24-2018, 08:45 PM	#47
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build That's just how it goes isn't it? Oh well, you'll get it fixed up. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-24-2018, 10:52 PM	#48
bryant6 Registered User Join Date: Jan 2018 Location: Boston Posts: 3	Re: 67 Camaro Build Big project... what’s been done looks pretty good. I'm so jealous __________________ Bryan 1980 Chevrolet C20 LWB 2wd 2014 Harley Davidson Heritage Softtail 192.168.0.1 bullet force unblocked

01-26-2018, 06:31 PM	#50
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 67 Camaro Build Nice! Is the body ready for paint yet? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.