Pics of what puts up your power!!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lattimer · 10-22-2013, 08:43 PM

Quote:

Originally Posted by elf w/capital T

Wow. I wanna 572!!

Me too

bbcmudtruck · 10-22-2013, 08:48 PM

Quote:

Originally Posted by 69truckin

all nice engines i especially wanna see that 496 in the future thats what i want! the pops is a lil mad only cause of the cost i preatty much have everything new all seals a whole new front end im going with a 68 front clip.

Well I just talked to the body guy that is doing my truck and he said he uses a few coats of primer before he puts on the paint so the heat wont kill the paint job. He also said he doesn't put a clear coat on it, but I can't remember what he said he did use instead. I can post up a picture of a whole lot of new parts, but not a complete 496 yet. I suppose I could snap a pic of my little sbc that came with the truck. Its dressed up a little.

bbcmudtruck · 10-22-2013, 08:50 PM

Quote:

Originally Posted by 69truckin

all nice engines i especially wanna see that 496 in the future thats what i want! the pops is a lil mad only cause of the cost i preatty much have everything new all seals a whole new front end im going with a 68 front clip.

Well I just talked to the body guy that is doing my truck and he said he uses a few coats of primer before he puts on the paint so the heat wont kill the paint job. He also said he doesn't put a clear coat on it, but I can't remember what he said he did use instead. I can post up a picture of a whole lot of new parts, but not a complete 496 yet. I suppose I could snap a pic of my little sbc that came with the truck. Its dressed up a little. There are some really nice engine bays in this thread, I'm glad you posted the idea! I didn't realize so many people were running big CI motors in their trucks.

ItsRandy · 10-22-2013, 08:59 PM

Quote:

Originally Posted by metalfab

Merlin 540 with Holley MPFI hooked to a 4L80E...........can you say hang on

How do you like the hydro-boost?

ItsRandy · 10-22-2013, 09:02 PM

Quote:

Originally Posted by elf w/capital T

Wow. I wanna 572!!

Go ahead...it's only money.

ItsRandy · 10-22-2013, 09:06 PM

502 and a 4l80e...it's a lot of fun.

**jeffahart** · 10-22-2013, 09:08 PM

16 horse power and 15 gallons to the mile(makes a big slurping sound but goes nowhere). I love it, the smell of a bit of oil and gas. Smells like, AMERICAN IRON!!

tmc1986 · 10-22-2013, 10:00 PM

Quote:

Originally Posted by metalfab

Merlin 540 with Holley MPFI hooked to a 4L80E...........can you say hang on

well i was gonna post pics of my engine.....

Chevys10dr · 10-22-2013, 11:27 PM

Heres mine. Don't have the installed picks uploaded yet.
Name: Wood Buffalo-20130512-00072.jpg
Views: 632
Size: 47.2 KB

Z10 · 10-22-2013, 11:36 PM

This ZZ4

Soon to have this F.I.R.S.T. TBI intake.

So, if your interested in a brand new, ZZ4 intake, Holley 750 carb, HEI distributor, and Air cleaner, just happen to have them.

69moneypit · 10-23-2013, 11:29 AM

Crate 350 turbo 350 3500 stall 373 posi .

metalfab · 10-23-2013, 11:32 AM

Quote:

Originally Posted by ItsRandy

How do you like the hydro-boost?

LOVE IT!!!! This the only way to go!

**slomotion** · 10-23-2013, 11:46 AM

Well, I'm not very fast, but I sure am slow!

It'll do the speed limit.....

Lattimer · 10-23-2013, 11:51 AM

Quote:

Originally Posted by slomotion

Well, I'm not very fast, but I sure am slow!

It'll do the speed limit.....

Doesn't have to be fast when it looks that good

metalfab · 10-23-2013, 11:53 AM

X2

deestrong71 · 10-23-2013, 12:42 PM

454 Roller .30 over.

Winter Project - 572

**slomotion** · 10-23-2013, 12:52 PM

Thanks guys!

slow-1 · 10-23-2013, 03:21 PM

My little mild 360 (350 bored .40 over).

GMC Canuck · 10-23-2013, 03:46 PM

my 383. Built it about ten years ago, just giving it some paint and a little TLC.
Just dropped the ramjet fuel injection on. Still have to sort out the electronics and wiring but that will have to wait until the rest of the truck is back in one piece.

*Fitz* · 10-23-2013, 04:14 PM

Quote:

Originally Posted by RustedMetal

Damn, 572 under the hood would be sick.

Mines just a lil 355.

It does make noise. Here is a video: http://s851.photobucket.com/user/BWF...out-1.mp4.html There are a couple of really nice engines here that should keep up with it. I don't think I want to run that 496! As for yours, that little 355 should run just fine. Very nicely done!

*Fitz* · 10-23-2013, 05:31 PM

Quote:

Originally Posted by ItsRandy

Go ahead...it's only money.

No money by itself just doesn't get it done. It take planning and the ability to do your own work...all of it. I paid $3200.00 for the truck; pulled the anemic 350 and TH350 trans which I sold. Three years of turning wrenches, welding, grinding, priming and an additional 22K in receipts for engine, trans, overdrive, headers, rad, fans, gauges, brakes, springs, spindles and miscellaneous stuff and my truck is done. Do you think that 540 Merlin cost less? let's go ask. Could you get some shop to build this truck? Maybe, but not for $25200.00 you can't!
It's not about throwing money at a truck. It's about planning your build so that when you are finished you have what you wanted. I have what I wanted. A truck that will run through the Quarter mile in the low elevens on street tires with the Air Conditioning on.

So when you say ," Go ahead... it's only money" you, sir, are just wrong. There's a great deal more to it than just money.

Wasted Income · 10-23-2013, 05:45 PM

Quote:

Originally Posted by Fitz

run through the Quarter mile in the low elevens on street tires with the Air Conditioning on.

You shouldn't run with the AC on....water on the track is a bad thing.

P.S. I know what you meant

*Fitz* · 10-23-2013, 08:08 PM

Quote:

Originally Posted by Wasted Income

You shouldn't run with the AC on....water on the track is a bad thing.

P.S. I know what you meant

Well....yes it is. With street tires I stay out of the waterbox too. But it sure does sound cool to say you made the last run with the AC on.

camaro_red · 10-23-2013, 09:04 PM

Dart stroker 421, Crower crank, Kryptonite rods, Ross Pistons, Brodix heads, FAST Seqential EFi system with Banks Twin Turbo's sitting on display at the builders

**Tom Vogel** · 10-23-2013, 09:09 PM

Quote:

Originally Posted by camaro_red

Dart stroker 421, Crower crank, Kryptonite rods, Ross Pistons, Brodix heads, FAST Seqential EFi system with Banks Twin Turbo's sitting on display at the builders

I dont want to play anymore.

10-22-2013, 09:06 PM	#31
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: Pics of what puts up your power!!!!! 502 and a 4l80e...it's a lot of fun. Attached Images

10-22-2013, 09:08 PM	#32
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,906	Re: Pics of what puts up your power!!!!! 16 horse power and 15 gallons to the mile(makes a big slurping sound but goes nowhere). I love it, the smell of a bit of oil and gas. Smells like, AMERICAN IRON!! Attached Images

10-22-2013, 11:27 PM	#34
Chevys10dr Registered User Join Date: Feb 2008 Location: Fort McMurray, AB Posts: 192	Re: Pics of what puts up your power!!!!! Heres mine. Don't have the installed picks uploaded yet.

10-22-2013, 11:36 PM	#35
Z10 Registered User Join Date: Aug 2012 Location: Midland, TX Posts: 1,267	Re: Pics of what puts up your power!!!!! This ZZ4 Soon to have this F.I.R.S.T. TBI intake. So, if your interested in a brand new, ZZ4 intake, Holley 750 carb, HEI distributor, and Air cleaner, just happen to have them. __________________ 1969 RS/SS Z10 Camaro Pace coupe 1972 GMC Short Step buildhttp://67-72chevytrucks.com/vboard/s...=1#post6356218 1979 Mazda RX7 1979 Pontiac Trans Am WS6 & 1979 Pontiac Trans Am 10th Anniversary 1999 Honda Valkyrie 2006 Corvette Z06 2010 BMW 650i

10-23-2013, 11:29 AM	#36
69moneypit Divorced .....WITH KIDS Join Date: Dec 2003 Location: mississippi Posts: 619	Re: Pics of what puts up your power!!!!! Crate 350 turbo 350 3500 stall 373 posi . Attached Images __________________ 1969 GMC SWB 1975 Chevy Malibu 80k 1963 Ford Galaxie 63k (inherited) 2005 Nissan Armada (wife's idea)

10-23-2013, 11:46 AM	#38
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Re: Pics of what puts up your power!!!!! Well, I'm not very fast, but I sure am slow! It'll do the speed limit..... Attached Images __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."

10-23-2013, 11:53 AM	#40
metalfab Registered User Join Date: Apr 2009 Location: Missouri Posts: 58	Re: Pics of what puts up your power!!!!! X2

10-23-2013, 12:42 PM	#41
deestrong71 Registered User Join Date: Sep 2013 Location: Shawneetown, Illinois Posts: 47	Re: Pics of what puts up your power!!!!! 454 Roller .30 over. Winter Project - 572 Attached Images __________________ Hope, Faith and Strength Deestrong

10-23-2013, 12:52 PM	#42
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Re: Pics of what puts up your power!!!!! Thanks guys! __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."

10-23-2013, 03:21 PM	#43
slow-1 Registered User Join Date: May 2013 Location: Central NC Posts: 830	Re: Pics of what puts up your power!!!!! My little mild 360 (350 bored .40 over). __________________ 1972 Cheyene C-10 "Ole Green" My Grandfathers truck (early 70's to 1983) My first vehicle (1983) Original 350 (3 rebuilds) 700R4 from Bowtie Overdrives

10-23-2013, 03:46 PM	#44
GMC Canuck Registered User Join Date: May 2012 Location: Ingersoll, Ontario Posts: 93	Re: Pics of what puts up your power!!!!! my 383. Built it about ten years ago, just giving it some paint and a little TLC. Just dropped the ramjet fuel injection on. Still have to sort out the electronics and wiring but that will have to wait until the rest of the truck is back in one piece.

10-23-2013, 09:04 PM	#49
camaro_red Registered User Join Date: Oct 2007 Location: Prince George Canada Posts: 267	Re: Pics of what puts up your power!!!!! Dart stroker 421, Crower crank, Kryptonite rods, Ross Pistons, Brodix heads, FAST Seqential EFi system with Banks Twin Turbo's sitting on display at the builders Attached Images __________________ ____ ______//__{\_____ ,/_(O)__/____/_(O)_/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.