IL cleaning house

[rich67]

Originally Posted by mcbassin

Rich,
If it's cheaper without the rubber, yes. I know shipping should be cheaper. but I plan on buying a new gasket. Just look your best one over real good and let me know. No hurry

sir i honestly dont think these sets are what you are looking for they both have some dings in them. and some scratches. i would call them driver sets. i can take some close up pics if you think you mite want them. just my honest opinion.

[rich67]

good driver 69 outer grill $40 no ship
very good 71-72 bowtie $40
driver red seatbelts retractors work be good shape if cleaned up. $20
green defrost duct $5

[broken 68 chevy]

how much for the mirrors shipped to 19943?

[rich67]

Originally Posted by broken 68 chevy

how much for the mirrors shipped to 19943?

Will get u a quote first thing monday morning. Thanx, rich

[allons]

I would like a pair of the 4 core radiator hold downs (the best 2). PM me, Thanks

[rich67]

ttt

[Baker819]

I could use the battery box and shift linkage parts. How much shipped to 98221
I could use a open carrier for a 12 bolt if you have one of those laying around too...

thank you

[slowtruck]

Got the stuff today. Thank you!

[rich67]

Originally Posted by slowtruck

Got the stuff today. Thank you!

good to hear. thank you.

[rich67]

Originally Posted by Baker819

I could use the battery box and shift linkage parts. How much shipped to 98221
I could use a open carrier for a 12 bolt if you have one of those laying around too...

thank you

i will get you a quote on these items. any certain ratio you are looking for? i assume your asking about a ring and pinion set. let me know as i do have one or two. thanx, rich

[rich67]

wednesday hump bump!

[Baker819]

Originally Posted by rich67

i will get you a quote on these items. any certain ratio you are looking for? i assume your asking about a ring and pinion set. let me know as i do have one or two. thanx, rich

Actually I do not need the ring and pinion. Just the carrier w/ spider gears, shafts and any other little thing involved with it. I was going to upgrade the whole rearend with a posi, disc brakes, new bearings, seals and axles and have it blasted and than I looked how much it was and am just going to replace the broken parts for right now. haha. They sure don't give parts away these days

[scampr]

Hello new here so hope i am doing this right.. wondering about the condition of the 70 slider and shipping to 03043 thanks

[rich67]

Originally Posted by Baker819

Actually I do not need the ring and pinion. Just the carrier w/ spider gears, shafts and any other little thing involved with it. I was going to upgrade the whole rearend with a posi, disc brakes, new bearings, seals and axles and have it blasted and than I looked how much it was and am just going to replace the broken parts for right now. haha. They sure don't give parts away these days

Thats no bull. I look and see if i still have the carrier. I think i have the spiders and shafts and shims and such. Will look tomoro. Shipping on linkage and battery tray is $18. If i come up with carrier and such ill box it all together and get a price too.

[Baker819]

It looks like the battery tray is in good shape just a lot of surface rust, right? I might be able to get away with just swapping the spider gears. I will look my 12 bolt over really good and let know you know tomorrow. Thanks again

[rich67]

Originally Posted by Baker819

It looks like the battery tray is in good shape just a lot of surface rust, right? I might be able to get away with just swapping the spider gears. I will look my 12 bolt over really good and let know you know tomorrow. Thanks again

no sir. yes on the surface rust but good size hole in the front passenger side corner. reason its only $5. thought you saw that. can try to get a better pic of it tomoro if you want. i figured somebody could lay a piece of sheet metal in the bottom and use for a driver. actually it would hold a battery just fine. mine does and its about the same. lol let me know on that. ill wait to hear from you on the 12 bolt also. and just so you know all shift linkage is there except bracket that is bolted on the trans. can see its missing in pics but just wanted to make sure you know. thanx, rich

[Baker819]

Ooo I do see the hole now.

I should have asked before. Is the the clutch linkage from a V8? It looked like it was... the 6 cylinder was quite a bit longer.

And I just need the spider gears with the spacers (if you have them but its no big deal if you don't) and than the linkage if it's from a V8.

[rich67]

Originally Posted by Baker819

Ooo I do see the hole now.

I should have asked before. Is the the clutch linkage from a V8? It looked like it was... the 6 cylinder was quite a bit longer.

And I just need the spider gears with the spacers (if you have them but its no big deal if you don't) and than the linkage if it's from a V8.

it is ive never had a sixer. will check on spiders this morning. thanx dude.

[rich67]

Originally Posted by scampr

Hello new here so hope i am doing this right.. wondering about the condition of the 70 slider and shipping to 03043 thanks

ill look it over good today. i would guess driver shape. someone put that tinting on there but i just pulled most of it right off. the rest would come off pretty easy with a scraper. or something to loosen it up. fabric softener etc. latch works. i dont know for sure if this is oem or a replacement as truck has been gone for a long time.

[rich67]

Originally Posted by Baker819

Ooo I do see the hole now.

I should have asked before. Is the the clutch linkage from a V8? It looked like it was... the 6 cylinder was quite a bit longer.

And I just need the spider gears with the spacers (if you have them but its no big deal if you don't) and than the linkage if it's from a V8.

i do have the spiders and spacers. do have the carrier too. and keeper shaft and axle clips and bearing races and bearing caps. let me know what you want brother.

[Baker819]

Okay I will take the all the shift linkage stuff, spiders and keeper shaft please. Shipped to 98221. PM me your paypal and a final price and I will should send it out tomorrow after work

[72blazer_mud_bogger]

Originally Posted by rich67

shift linkage $20
very driver armrest $5
hood springs $5
ignition switch for parts $5
carb linkage rod $8
gas tank clips free you pay shipping
oil pressure asst $8
wiper motor $20
72 distributor and coil $20
carb spacer $10
battery cable $5
ashtrays $10 each for ones with mounting brackets $5 for the other
4 core rad hold downs $10 each two sets one extra 3core free
driver side bench seat bracket $15
assorted brackets $15 for all or $5 eachthree of the brackets sold
th350 flywheel cover $15

350 trans over shipped to 63104

[rich67]

Originally Posted by 72blazer_mud_bogger

350 trans over shipped to 63104

Get a quote tomoro. Thanx

[rich67]

Originally Posted by Baker819

Okay I will take the all the shift linkage stuff, spiders and keeper shaft please. Shipped to 98221. PM me your paypal and a final price and I will should send it out tomorrow after work

Sending pm.

[best view]

ill take the 72 lighter the one on left and the blue bow tie going to 02367