|
11-16-2008, 11:09 PM
|
#26 |
|
Moderator
 
Join Date: Jun 2008
Location: Modesto, CA
Posts: 5,775
|
Re: 69 cst-10
Nice craftsmanship!
__________________
2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn
70 Longhorn CST Build Adding an AM/FM Decal |
|
|
|
11-18-2008, 11:21 PM
|
#27 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Got some new toys in and some pics of the housing welds. Poly mounts from Performance Online.
__________________
69 c-10 BBC  462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.  3.5/6in drop. My Build.
Last edited by ripdog28; 11-18-2008 at 11:22 PM. |
|
|
|
|
11-18-2008, 11:25 PM
|
#28 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
The other truck i have been neglecting while doing the chevy.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
11-26-2008, 12:42 AM
|
#29 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Got a beautiful gift today. Dont she look beautiful with her Detroit locker?
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
11-26-2008, 12:44 AM
|
#30 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Forgot pics
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
11-27-2008, 06:06 PM
|
#31 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 69 cst-10
Nice looking build ya got going..
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
11-29-2008, 09:27 PM
|
#32 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
got some frame braces in so i can weld in my Watts link setup. Some of the thickest stuff i have welded on with my little Hobart 140.
The welds penetrated better then the bottom pic shows. these are just behind the rear axle where the Tabs weld up to.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
Last edited by ripdog28; 11-29-2008 at 09:32 PM. |
|
|
|
|
11-30-2008, 09:05 PM
|
#33 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Got a few more items welded up. the rear suspension is just about done. I ran out of welding gas so need to hold off. a few crappy welds because i ran out and didnt want to wait because i was about done.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
12-06-2008, 10:26 PM
|
#34 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Worked on assembling the rear end today and i had an extra hand which i really appreciated. If it were not for her small fingers i would have had a hard time getting some nuts on. Made her do some of the dirty work
 cleaning out the inside of the housing. Got it all complete untill i realize that i forgot something.(third pic) so had to take it back apart and do it right.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
Last edited by ripdog28; 12-06-2008 at 10:27 PM. |
|
|
|
|
12-07-2008, 01:50 PM
|
#35 |
|
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: 69 cst-10
very nice , my wife helps but not that much usually, lucky, they always looks best in coveralls, what gearing are you going with?
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
|
|
|
|
12-07-2008, 06:27 PM
|
#36 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
It is a 3.70 so it is somewhat easy on the highway. Would have liked to go with 3.89 or 4.11 but it will see more street then track. As it is she drives the Dodge Ram and i ride the Buell daily so i am anxious to get another vehicle on the road.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
12-15-2008, 05:54 PM
|
#37 |
|
Double 6's
Join Date: Oct 2008
Location: Winter Haven, FL
Posts: 349
|
Re: 69 cst-10
Very nice! Just cleaned out the shop to get started doing this on my bucket....except no Watts.....
|
|
|
|
|
12-15-2008, 09:25 PM
|
#38 |
|
Registered User
Join Date: Dec 2008
Location: Cement, Ok
Posts: 23
|
Re: 69 cst-10
Like what you are doing with the truck, doing close to the same with my 67 have a built 496 with a 304hr comp cam, heavily worked oval port heads, all scat rotating assembly, forged pistons. Was wondering how you were going to finish setting up your rear diff.
__________________
72 SNB Drag truck 67 Project (Sold) 85 4x4 11 Z71 |
|
|
|
|
12-24-2008, 10:56 PM
|
#39 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: 69 cst-10
This thing is lookin awesome. Cant wait to see it all back together
|
|
|
|
|
12-27-2008, 12:59 AM
|
#40 |
|
Formerly- 1972SuperCheyenne
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: 69 cst-10
Great looking build. Keep up the good work.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
|
|
|
|
12-28-2008, 07:15 PM
|
#41 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Got a bit of stuff done this weekend. After i got the trans back i found out that i have a rare case. The guy that rebuilt it was not sure about it. but it does have the accessories to be a GM or OLDS/Pontiac th-350
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
12-28-2008, 07:19 PM
|
#42 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
more pics. After the front end squated i still do not think that the sway bar is going to work.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
12-28-2008, 07:21 PM
|
#43 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
More
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
12-29-2008, 10:24 AM
|
#44 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Forgot a pic of the whole front end.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
Last edited by ripdog28; 12-29-2008 at 10:27 AM. |
|
|
|
|
01-02-2009, 09:36 PM
|
#45 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
Got my sway bar problem worked out. Problem was i mounted it to the frame first. I now mounted it to the Control arms and then found out i need to drill some new mount holes on the frame. Also a rough ride height. I still need about 2-300lbs more on the front so will drop about another inch.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
01-02-2009, 09:44 PM
|
#46 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: 69 cst-10
Nice work! That motor looks badass
|
|
|
|
|
01-06-2009, 06:42 AM
|
#47 |
|
Registered User
Join Date: Aug 2008
Location: travis afb
Posts: 304
|
Re: 69 cst-10
nice build. Looks great. Keep us posted. Thing is going to be a monster.
__________________
67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop |
|
|
|
|
01-06-2009, 04:38 PM
|
#48 | |
|
Registered User
Join Date: Apr 2007
Location: antreville, south carolina
Posts: 873
|
Re: 69 cst-10
Quote:
__________________
"Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster |
|
|
|
|
|
01-07-2009, 09:45 AM
|
#49 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
I have no idea of what it was in. The guy that built it for me just had about 20 blocks in his shop at various stages of builds. I went to talk to him about building me a 383 @ 500hp. He told me that the 350 block i had would not work to well for that due to it being a replacement block that was cast in mexico. He had a 400 block (he said the good casting) sitting there and said he could build me a 415 or 434. We talked about a rough build price. Then he said you know for the same price or cheaper I can build you this. Then I saw that Big block and without hesitation I said OK.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
|
02-08-2009, 11:29 AM
|
#50 |
|
Registered User
Join Date: Apr 2008
Location: Imperial Beach, CA
Posts: 1,040
|
Re: 69 cst-10
well desprate times call for some hard decisions. Caifornia likes to screw people during tax time and im looking to buy a house and get married. I am seriously thinking about selling my project. Either just the engine or the whole thing. I am not sure just yet due to me knowing i will lost some serious money if i sell any of it. It is getting hard to sleep because i do not want to do it but almost no other choice. this sucks.
__________________
69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles. 3.5/6in drop. My Build.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
